SENNHEISER E-608 SUPER-CARDIOID DYNAMIC MICROPHONE

The e 608 is a super-cardioid microphone ideal for almost invisible clip-miking
of woodwind (except certain Flutes), brass and drums. A newly developed clamp
and gooseneck mounting enables the capsule to be positioned close to the signal
source for high realism and high-level output.

Features
Rugged reinforced glass-fibre body
Shock-mounted capsule provides low sensitivity to impact and handling noise
Hum compensating coil
Extremely robust connection cable with XLR connector
Delivery Includes
1 e 608
1 microphone clip
1 pouch

Technical Data
Frequency Response  40.....16000 Hz 
Sensitivity in free field, no load (1kHz)  0,8 mV/Pa 
Min. terminating impedance  1000 Ohm 
Dimensions  d 17 x 185 mm 
Weight w/o cable  20 g 

Low-profile, cost efficient clip-on microphone for applications including houses of worship, lecturers, etc. Connects to AKG bodypack transmitters.

The CK 99 L provides a natural sound, with a slight rise above 10 kHz for added clarity. Its cardioid polar pattern and bass rolloff combine to suppress unwanted ambient noise.

Cardioid polar pattern
eliminates noise from the rear

125° pickup angle
for inexperienced or very vivacious talkers

Small housing and durable metal clip
for inconspicuous, secure mounting

General	Audio Frequency bandwidth 15 to 18000 Hz Sensitivity 8.8 mV/Pa Equivalent Noise Level 34 dB-A Signal to Noise 60 dB-A Electrical Impedance 200 Ohms Recommended Load Impedance 2000 Ohms
Polar Patterns	Cardioid
Powering Interface	Voltage 1.5 to 10 V Current 2 mA
Audio Output	Type Mini XLR Gender Female Contacts 3-pin
Design	Finish matte black
Dimensions / Weight	Height 23 mm Diameter 8 mm Net Weight 2.5 g

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RØDE Rec app for iOS, or any other audio app of their choice.

By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ʽbʼ, ʽtʼ and ʽpʼ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.

The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RØDEʼs RØDE Rec app for Apple iOS devices. RØDE Rec turns the userʼs iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.

Acoustic Principle    Pressure Gradient
Active Electronics    JFET
Capsule    0.10“
Polar Pattern     [Omnidirectional - picks up all sides equally]
Address Type    End
Frequency Range    20Hz - 20kHz (selected HPF @ 0)
Output Impedance    0Ω
Maximum SPL    110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level    189.0dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity    -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)    27dB-A
Weight     6.00gm
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Output     TRRS Output
Warranty     1 year

Micro-sized lavalier condenser microphone for wireless and wired applications.

Cardioid microphone with 8ʼ cable terminating to a mini-XLRf connector with phantom power adapter for hard wired applications.

Includes APS910
phantom power adapter. 9-52 V phantom power. Black.

Transducer     Electret condenser
Polar Pattern     Cardioid
Frequency Response     20 to 20,000Hz
Output Impedance     165.5 Ω
Sensitivity     -39.0 dBV/Pa (11.0 mV)
Max Input Sound Level (SPL)     1000 Ω load: 129.5 dB SPL; 2500 Ω load: 134.5 dB SPL
Signal-to-Noise Ratio     57.0 dB
Dynamic Range     @1kHz
1000 Ω: 92.5 dB SPL; 2500 Ω: 97.5 dB SPL
Self Noise     37.0 dB
(equivalent SPL, A-weighted, typical)
Clipping Level     1000 Ω load: 1.0 dBv; 2500 Ω load: -4.5 dBv
Operating Temperature     Operating: 0 to 135°F (-18 to 57°C)
Storage: -20 to 165°F (-29 to 74°C)
Polarity     XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Power Requirements     11-52VDC phantom power (IEC-61938), Dimensions (LxDiameter)     Length: 5' (1.52m)
Diameter: 0.23" (5.8mm)
Weight     4.3 oz (121 g)

The Shure MX150 Subminiature Lavalier Microphone is a subminiature, multi-positioned clip-on microphone well suited for broadcast operation, sermons, presentations, public address and much more. This version includes the RK100PK XLR in-line preamplifier for use with standard XLR connections in mixers, recorders, mic-pres, etc. Shure's CommShield technology makes the MX150 impervious to noise caused by cell phones, PDAs, WiFi and other RFI. The microphone ships with a snap-fit foam windscreen and multi-position tie clip with an integrated cable management system that minimizes noise without increasing cable strain and tension.