SENNHEISER XSW-1-CI1-B Wireless Instrument Set

• Compact bodypack transmitter, rugged instrument cable
• Antenna-switching diversity reception
• Integrated antennas
• Automatic frequency management and synchronization via remote channel for easy setup
• Selectable UHF frequencies within a large bandwidth
• Up to 10 compatible channels
• THD, total harmonic distortion ? 0.9%
• Signal-to-noise ratio ? 103 dBA
• RF output power 10 mW
• Switching bandwidth up to 24 MHz
• Operating time approx. 10 hrs
• Modulation Wideband FM
• Power supply Receiver: 12 V DC nom. / 300 mA
• Transmitter: 2 AA size batteries, 1.5 V
• Output voltage 1/4" (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu
• Housing Rugged ABS housing
• Frequency 8 frequency banks, each with up to 10 factory-preset channels
• Frequency range A: 548-572 MHz, GB: 606-630 MHz
• B: 614-638 MHz
• C: 766-790 MHz
• D: 794-806 MHz
• E: 821-832 MHz, 863-865 MHz
• K: 925-937.5 MHz
• Sensitivity
• SPL for peak deviation 130 dB
• Squelch adjustable from 3 dBμV to 28 dBμV (combined with pilot tone)
• Synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization)
• Input sensitivity 1.5 mV / Pa
• AF frequency response Receiver: 50 to 16,000 Hz (–3 dB)
• Adjustment Range Transmitter 0 to -30 dB, adjustable in 10 dB steps
• Audio adjustment range 45 dB, adjustable in 5-dB steps
• Line / Mic level 20 dB, switchable
• Temperature Range operation: 0°C to +40°C, storage: –20°C to +70°C
• Receiver Principle double superheterodyne
• Diversity principle Antenna switching diversity via internal antennas

• 1 receiver EM-XSW 1
• 1 bodypack transmitter SK-XSW
• 1 instrument cable Cl1
• 1 power supply NT 12-5 CW
• 2 AA batteries

VWTTM

Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.


Superior specs.

Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)

Cable tone simulation.

Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.

Compander free.

Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.

30 MHz selection bandwidth (depending on local frequency plans)

- 8 hours of operation with a single AA size battery

- Compatible with all AKG MicroMics

- Low battery indicator

- Smallest and lightest bodypack transmitter in its class

- Complete with MKG L cable for direct connection to electric guitar or bass

The Perception wireless system comes complete with bandwidths up to 30 MHz and excessively low-current transmitters, which are unique in its class, cementing Perception Wireless as one of the most comprehensive systems in its price range.

The Perception Wireless is designed to accommodate musicians and entry-level audio technicians, although it has the capabilities to handle even the most difficult audio setups with up to 8 channels per band.

The pocket transmitter PT45 - which is the smallest in its class - runs on a single AA battery, and is compatible with all AKG MicroMics. The SR45 Stationary Receiver delivers a diversity system, professional XLR and 1/4 inch jack outputs and the SMPS solution.

Set composed of:

• 1 x LDWIN42R2
• 2 x LDWIN42BP
• 2 x LDWS100MH3

Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.

With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).

The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.

The rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.

• UHF frequency range 734 - 776 MHz
• 1680 frequencies
• 20 groups with 577 fixed frequencies
• user bank with 1680 freely selectable frequencies in 25 kHz increments
• 255 addresses selectable
• channel scan
• true diversity receiver
• interchangeable microphone capsules (dynamic / condenser)

Receiver display

• volume
• radio frequency level antenna A/B
• audio level
• battery status of transmitter
• transmitter sync via infrared
• squelch setting in menu
• equalizer setting in menu
• naming template in menu
• 10 sets storable
• lockable menu
• balanced XLR output, unbalanced 6.3 mm jack
• adjustable output
• adjustable headphone output

• battery status
• RF power
• AF power
• additional system information

• Model Name: LDWIN42R
• Channels: 1680 (20 groups + 1 user group)
• Frequency range: 734 - 776 MHz
• Audio Frequency response: 60 Hz - 16 kHz
• THD:
• Signal/Noise ratio: >100 dB
• Audio Output: XLR balanced / 6,3 mm Jack unbalanced
• Power Supply: external power adapter 13,5 V DC, 500 mA
• Dimensions (W x H x D): 212 x 44 x 184 mm

• Model Name: LDWIN42MD
• Channels: 1680
• Frequency range: 734 - 776 MHz
• Audio Frequency response: 60 Hz - 16 kHz
• RF output power: adjustable 10 mw / 30 mw / 50 mw
• Power requirement: 2 x AA size batteries
• Operating time: >13 h with alkaline batteries
• Dimensions (L x Ø): 255 x 52 mm

• Model Name: LDWIN42BP
• Channels: 1680
• Frequency range: 734 - 776 MHz
• Audio Frequency response: 60 Hz - 16 kHz
• RF output power: adjustable 10 mw / 30 mw / 50 mw
• Input Connector: mini XLR 3-pole (phantom power for headset)
• Power requirement: 2 x AA size batteries
• Operating time: >14 h with alkaline batteries
• Dimensions (W x H x D): 87 x 25 x 63 mm