SENNHEISER XSW-1-908-B Wireless Brass Instrument Set

A powerful performance. Go for XS WIRLESS 1 and rely on a solid wireless transmission with up to 10 compatible channels in a stable UHF band.
The XS WIRELESS 1 BRASS SET is an easy to use all-in-one wireless system, especially designed to provide a powerful
live sound for brass instruments. The set includes an intuitive stationary receiver for quick set-up and hassle-free handling, as well as a compact bodypack transmitter and a rugged condenser gooseneck microphone.

FEATURES

• Versatile gooseneck microphone with outstanding sound reproduction from the renowned evolution microphone series
• Antenna-switching diversity reception
• Integrated antennas
• Automatic frequency management and synchronization via remote channel for easy setup
• Selectable UHF frequencies within a large bandwidth
• Up to 10 compatible channels
• Microphone condenser 
• THD, total harmonic distortion ? 0.9% 
• Pick-up pattern cardioid 
• Signal-to-noise ratio ? 103 dBA 
• RF output power 10 mW 
• Switching bandwidth up to 24 MHz 
• Operating time approx. 10 hrs 
• Modulation wideband FM 
• Output voltage 1/4" (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu 
• Housing rugged ABS housing 
• Frequency 8 frequency banks, each with up to 10 factory-preset channels 
• Frequency range A: 548-572 MHz, GB: 606-630 MHz 
• B: 614-638 MHz 
• C: 766-790 MHz 
• D: 794-806 MHz 
• E: 821-832 MHz, 863-865 MHz 
• K: 925-937.5 MHz 
• Sensitivity
• SPL for peak deviation 147 dB 
• Squelch adjustable from 3 dBμV to 28 dBμV (combined with pilot tone) 
• Synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization) 
• Input sensitivity 1.5 mV / Pa 
• Audio adjustment range 45 dB, adjustable in 5-dB steps 
• Line / Mic level 20 dB, switchable 
• Temperature Range operation: 0°C to +40°C, storage: –20°C to +70°C 
• Receiver Principle double superheterodyne 
• Diversity principle antenna switching diversity via internal antennas 

• Dimensions approx. 200 x 42 x 127 mm 
• Weight approx. 340g 
• Power supply Receiver: 12 V DC nom. / 300 mA 
• AF frequency response Receiver: 50 to 16,000 Hz (–3 dB) 

• Dimensions approx. 71 x 96 x 28 mm 
• Weight approx. 95g 
• Power supply Transmitter: 2 AA size batteries, 1.5 V 

• 1 receiver EM-XSW 1
• 1 gooseneck microphone e908T
• 1 bodypack transmitter SK-XSW
• 1 power supply NT 12-5 CW
• 2 AA batteries

VWTTM

Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.


Superior specs.

Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)

Cable tone simulation.

Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.

Compander free.

Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.

AKG WMS 470 Wireless Instrument Set has an automatic frequency setup function that immediately finds and displays all available channels. WMS470 by AKG operates up to 16 channels simultaneously within the same frequency band and up to 48 channels by using multiple frequency bands. AKG WMS 470 wireless system includes an AKG PT470 transmitter, AKG SR470 receiver and an MKG L instrument cable. WMS470 instrument set  incorporates handheld, headworn and lavalier mic options.

System Specifications
Operating Frequencies: UHF band

Band C: 541.500 MHz to 566.375 MHz (996 frequencies)

Band D: 655.500 MHz to 680.375 MHz (996 frequencies)

Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)

Not all frequencies are available in all areas. Please check with local regulations.

Minimum Frequency Step: 25 kHz

Modulation Mode: FM

Maximum Deviation: +/-35 kHz

Dynamic Range: > 110 dB (A-weighted), typical

Total Harmonic Distortion:
Operating Range: 100 m (300'), typical

Open range environment with no interfering signals.

Operating Temperature Range: -5o C to +45o C (23o F to 113o F)

Battery and LCD performance may be reduced at very low temperatures.

Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)

Receiver
Receiving System: True diversity

Image Rejection: 60 dB nominal, 55 dB minimum

RF Sensitivity: 20 dBuV at 60 dB S/N ratio

Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV

Antenna Input: BNC-type, 50 ohms

Bias voltage 12V DC, 60 mA, each

Power Requirements: 12-18V DC, 500 mA

Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.

Net Weight: 1.1 kg (38.8 oz), without accessories

Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

Body Pack
RF Power Output    High: 30 mW, Low: 10 mW (switchable), at 50 ohms

Spurious Emissions: Following federal and national regulations

Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V

Batteries: Two 1.5V AA, not included

Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)

Depending on battery type and use pattern.

Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H

Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in

Set composed of:

• 1 x LDWIN42R
• 1 x LDWIN42BP
• 1 x LDWS100GC

Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.

With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).

The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.

The half-rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.

• UHF frequency range 734 - 776 MHz
• 1680 frequencies
• 20 groups with 577 fixed frequencies
• user bank with 1680 freely selectable frequencies in 25 kHz increments
• 255 addresses selectable
• channel scan
• true diversity receiver
• interchangeable microphone capsules (dynamic / condenser)

 Receiver display

• volume
• radio frequency level antenna A/B
• audio level
• battery status of transmitter
• transmitter sync via infrared
• squelch setting in menu
• equalizer setting in menu
• naming template in menu
• 10 sets storable
• lockable menu
• balanced XLR output, unbalanced 6.3 mm jack
• adjustable output
• adjustable headphone output

• battery status
• RF power
• AF power
• additional system information

• Model Name: LDWIN42R
• Channels: 1680 (20 groups + 1 user group)
• Frequency range: 734 - 776 MHz
• Audio Frequency response: 60 Hz - 16 kHz
• THD:
• Signal/Noise ratio: >100 dB
• Audio Output: XLR balanced / 6,3 mm Jack unbalanced
• Power Supply: external power adapter 13,5 V DC, 500 mA
• Dimensions (W x H x D): 212 x 44 x 184 mm

• Model Name: LDWIN42MD
• Channels: 1680
• Frequency range: 734 - 776 MHz
• Audio Frequency response: 60 Hz - 16 kHz
• RF output power: adjustable 10 mw / 30 mw / 50 mw
• Power requirement: 2 x AA size batteries
• Operating time: >13 h with alkaline batteries
• Dimensions (L x Ø): 255 x 52 mm

• Model Name: LDWIN42BP
• Channels: 1680
• Frequency range: 734 - 776 MHz
• Audio Frequency response: 60 Hz - 16 kHz
• RF output power: adjustable 10 mw / 30 mw / 50 mw
• Input Connector: mini XLR 3-pole (phantom power for headset)
• Power requirement: 2 x AA size batteries
• Operating time: >14 h with alkaline batteries
• Dimensions (W x H x D): 87 x 25 x 63 mm