SENNHEISER E-609 Dynamic Microphone for Strings

The super-cardioid e 609 instrument microphone has been specially developed for miking guitar cabs face on and extremely close to the signal source.

Pick-up pattern : Super-cardioid
Frequency response : 40.....15000 Hz
Sensitivity in free field, no load (1kHz) : 1,5 mV/Pa
Nominal impedance : 350 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 55 x 34 x 134 mm
Weight : 140 g

The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.

Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage

Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
 

Precise artistic work deserves precise artistic craftsmanship. A classic by now, the CMS Series CK 1 capsule from AKG was a best seller from the moment it was launched in 1969. Comprising a range of interchangeable capsules and preamps as well as then innovative, dedicated accessories, the CMS Series from AKG quickly became a legend. It was discontinued in 1993. Responding to growing demand from recording engineers, AKG decided to produce the C 451 B with identical acoustical behaviour of the popular original C 451 EB + CK 1 microphone again, with dramatically improved specifications and outstanding price/ performance. The capsule of the new version is fixed permanently to the preamp to eliminate the mechanical problems of the screw joint. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. An all-metal body provides excellent protection from RF interference and the microphone is rugged enough to give excellent results even under very harsh conditions.

The C 451 B is an excellent tool for accurately capturing signals rich in transients such as drums, overhead miking, or other instruments with a percussive sound. The airy sound, high overload limit of the capsule and electronic circuitry, and improved engineering details of the C 451 B are a solid foundation for creating another legend.

The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 200 Hz to 15,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.

Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.

The kit includes all the standard accessories of the individual package along with a stereo bar and proof of performance charts in an attractive carrying case (Soundtool case, middle size).

Features:

• Identical acoustics of the legendary CK 1.
• Rugged construction.
• Ruler-flat on-axis frequency response.
• Precise, nearly frequency independent cardioid.
• Extremely accurate signal transfer.
• Transformerless output stage for minimum distortion at low frequencies.
• Protected against electrostatic and magnetic interference.
• Selectable 10-dB and 20-dB preattenuation pads.
• Switchable highpass filter (75 Hz or 150 Hz, 12dB/octave).
• Operates on phantom power to DIN/IEC between 12 V and 48 V.
• Complete with SA 40 stand adapter and W 90 windscreen.
• Each microphone comes with its own individual frequency response plot.

Specifications:

• Polar pattern: Cardioid
• Frequency range: 20 to 20,000 Hz
• Sensitivity: 9 mV/Pa (-41 dBV)
• Max. SPL: 135/145/155 dB (0/-10/-20 dB) (k=0,5%)
• Equivalent noise level (CCIR 468-3): 29 dB
• Equivalent noise level: 18 dB-A
• Signal/noise ratio (A-weighted): 76 dB
• Preattenuation pad: 0 dB, 10 dB, 20 dB selectable
• Bass filter: Flat, 12 dB/octave at 75 or 150 Hz, selectable
• Impedance: 1000 ohms
• Supply voltage: 9 to 52 V phantom power to DIN 45596
• Current consumption:

OVERVIEW

Cardioid dynamic kick drum mic with swivel mount and cable.

The PGA52 is a professional quality kick drum microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence. Legendary Shure quality construction ensures exceptional performance in rigorous environments.

Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning.

• Mountable microphone featuring swivel joint with quick-release latch for kick drum
• Dynamic cartridge (does not require phantom power) with cardioid polar pattern
• Tailored cartridge design for low-frequency clarity, including on bass amps
• Includes PGA52, zipper pouch and user guide
• XLR to XLR mic cable included

• Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
• Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
• Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
• Neodymium magnet for high signal-to-noise ratio output
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Frequency response: 50 to 16,000 Hz

• Frequency response shaped specifically for kick drums and bass instruments
• Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
• Studio quality performance, even at extremely high sound pressure levels
• Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
• Hardened steel mesh grille that resists wear and abuse
• Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
• Neodymium magnet for high signal–to–noise ratio output
• Low sensitivity to varying load impedance
• Legendary Shure quality and reliability