Content |
The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm, symm.
Min. terminating impedance 1000 Ohm
Output voltage 2 V (1 kHz)
Power supply Phantom 12 - 48 V
Current consumption 2,2 mA
Dimensions d 22 x 52 mm (netto)
Gain 0 dB
| The MX1BP is a battery-powered preamplifier designed to be used with Microflex? or other condenser microphones. It allows use of these microphones in situations where phantom power is not available. Features * 4-pin Tini Q-G? connector allows use with a variety of condenser microphones * Power LED Indicator indicates power status to the preamplifier * Mute/On switch attenuates microphone without turning off preamplifier * Belt clip allows mobility while using lavalier and headset microphones * Preamplifier operates on 9 V battery or phantom power * Features 3.7 m (12 ft) cord with attached male XLR connector |
- Universal phantom power supply for any condenser microphone
- Selectable +12 / +48 V power supply
- Ultra-low noise audio performance
- DC 12 V adapter included
- 3-Year Warranty Program*
- Designed and engineered in Germany
Studio-grade condenser microphones really sound great for capturing vocals, drums and other acoustic instruments, but what if your mixer doesnʼt provide the phantom power you need to make them work their magic! The ultra-compact MICROPOWER PS400 can solve all of that, and it's small enough to fit in your pocket – with a price tag to match!
The PS400 features XLR Thru jacks and provides superb noise-free operation. Just connect your condenser mic to the Mic Input and send a line from the Mic Thru to your mixer. You can toggle between +12 V and +48 V power, depending on the operating voltage your mic prefers. This handy, little audio solution comes with its own 12 V DC power supply and an LED, to let you know when itʼs own on.
With its small size and even smaller price tag, the MICROPOWER PS400 is the perfect solution for on-the-go +12 or +48 V phantom power. See how it complements your favorite mic and mixer at your nearest BEHRINGER dealer, or get yours online today! |
Palmer Pan 48 is a unit for the external power supply of phantom powered appliances. Due to the high current level of a maximum of 20mA, the application is not just limited to condenser microphones. PAN 48 is excellent for supplying phantom powered active DI-boxes. The box has two channels. Specifications: 2 channels, each channel: Microphone input: XLR/f Pin 2 & 3 +48VDC, Pin 1 Ground Output: XLR/m no DC voltage Ground lift switch Phantom power stabilized ±5%. Low ripple, low noise Max. current 20mA totally. LED control. Metal casing 110x110x45mm | PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC,2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89")
Weight: 245 g
Packaging: white box | Adam Hall Connectors 4 STAR A XF3 SM4 Adapter XLR female to 4-pole speaker connector male
Immediately ready to work, and the perfect addition to every adapter case. We all know this situation: "Yes, we do have installed loudspeakers in the venue", just arrived and already noticed that your speaker connector outputs in the amplifier don't fit to the installed XLR cables. No problem! With our 4 STAR A XF3 SM4 you are well equipped for such occasions.
Product type
Plugs and Connectors
Type
Standard Speaker Connector, XLR
Gender of connector 1
female
Connector 2
Standard Speaker Connector
Gender of connector 2
male
|
Reviews
There are no reviews yet.