The Sunstrip Active is the successor of the already popular Sunstrip I and II. However, this Sunstrip is fully active and has a built-in dimmerpack. In order to make the unit most versatile for many applications you can select different DMX modes: 1 channel, 2 channel, 5 channel and 10 channel. For stand-alone applications, the […]
The Sunstrip Active is the successor of the already popular Sunstrip I and II. However, this Sunstrip is fully active and has a built-in dimmerpack. In order to make the unit most versatile for many applications you can select different DMX modes: 1 channel, 2 channel, 5 channel and 10 channel. For stand-alone applications, the Sunstrip Active is equipped with 16 built in patterns as well as a manual dimmer. With its Neutrik Powercon in- and outputs the Sunstrip is suitable for the most demanding users on the road. For easy mounting the Sunstrip Active is equipped with two Wall/Floor brackets as well as several M10 nuts, in order to put your clamp in any desired position.
Built-in programs
Powercon. in- and output
Mounting/Floor brackets included
Power Supply: 240V/50 Hz
Power Consumption: 750W
Control Mode: DMX (selectable: 1, 2, 5
or 10 channels)
Current: 3,5A
Fuse: F6,3A
Lamp: 10x Showtec 240V/50W
GU10 (82382)
Dimensions: 1000 x 130 x 77 mm
Weight: 5,32 kg
Weight
5.32 kg
Reviews
There are no reviews yet.
Be the first to review “SHOWTEC 30710 Sunstrip Active DMX Incl. lamps & Powercon-lead” Cancel reply
The Sunstrip Active is the successor of the already popular Sunstrip I and II. However, this Sunstrip is fully active and has a built-in dimmerpack. In order to make the unit most versatile for many applications you can select different DMX modes: 1 channel, 2 channel, 5 channel and 10 channel. For stand-alone applications, the Sunstrip Active is equipped with 16 built in patterns as well as a manual dimmer. With its Neutrik Powercon in- and outputs the Sunstrip is suitable for the most demanding users on the road. For easy mounting the Sunstrip Active is equipped with two Wall/Floor brackets as well as several M10 nuts, in order to put your clamp in any desired position.
Built-in programs
Powercon. in- and output
Mounting/Floor brackets included
Power Supply: 240V/50 Hz
Power Consumption: 750W
Control Mode: DMX (selectable: 1, 2, 5
or 10 channels)
Current: 3,5A
Fuse: F6,3A
Lamp: 10x Showtec 240V/50W
GU10 (82382)
Dimensions: 1000 x 130 x 77 mm
Weight: 5,32 kg
In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones.
Budget Headphones Closed Type with High-performance Studio Headphones
Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget.
Behringer HPS5000 Headphones Features at a Glance:
Ultra-wide frequency response
High-definition bass and super-transient highs
Highly-efficient cobalt capsule
Outstanding dynamic range
Single-sided coiled cord with oxygen-free copper wires
Optimised oval-shaped ear cups
1/8'' connector plus 1/4'' adapter included
Ultra-rugged headband construction
Designed and engineered in Germany
Headphone
Driver Size
1.6" / 40 mm
Driver Type
Dynamic
Magnet Type
Cobalt
Design
Over-Ear (Circumaural)
Earcup Style
Closed-Back
General
Frequency Response
20 Hz to 20 kHz
Sensitivity
113.5 dB at 1 kHz
Impedance
32 Ohms
Maximum Power Handling
100 mW
Connectivity
Audio Connector to Source
1/8" / 3.5 mm
Adapter (Included)
1/4“
Cable
Cable Length
3.3 to 8.2\' / 1 to 2.5 m (Coiled)
Professional, very stable, sturdy music stand for use in bands, orchestras or on the stage.
Product type
Stands and Tripods
Type
Music stand
Music desk type
perforated music desk
Stand material
Steel
Stand surface
Powder coated
Stand colour
Black
Support material
Steel
Support surface
Powder coated
Support colour
Black
Support width
475 mm
Support height
340 mm
Min. height
977 mm
Max. height
1473 mm
Weight
2,845 kg
Adam Hall 874571WHI Rack light 19inch 1unit satin white
The new COOL-LIGHT 19\" LED-racklights produce light by means of light-emitting diodes, which last practically forever. Emitted via an optical system which can be rotated to adjust the angle of the beam, the light illuminates the entire width of the rack. Three models are available: multi-colour (6 colours, selectable), blue and white. The multi-colour COOL-LIGHT can be set to cycle automatically through the 6 colours. Thanks to the LED technology, COOL-LIGHT does not become hot and radiate almost no heat. All COOL-LIGHT products are supplied with a 5 V adapter.
Cameo THUNDER WASH 100 RGB
3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB
Strobe, Blinder and Wash Light all in one
132 RGB SMD LEDs
1 to 30 flashes/sec adjustable
DMX, Sound- and manual control
Master, Slave and Standalone operation
Rugged metal housing with universal mounting bracket
Low power consumption
The Thunder Wash 100 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 100 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
DAP AUDIO D8560 professional stand for larger bench mixers, equipped with weels. Its pratical shape, simplifies mobility and gives more stability when placed on the ground. Made of steel painted in black.
Technical Info
Weight (net): 22.5kg
Weight (gross): 23 kg
Height: 85 cm
Usefull Depth: 1265 mm
Maximum Carriage Capacity (Load) : 250 Kg
Dimensions: 1370x865x865mm (LxWxH)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.