The Sunstrip Active is the successor of the already popular Sunstrip I and II. However, this Sunstrip is fully active and has a built-in dimmerpack. In order to make the unit most versatile for many applications you can select different DMX modes: 1 channel, 2 channel, 5 channel and 10 channel. For stand-alone applications, the […]
The Sunstrip Active is the successor of the already popular Sunstrip I and II. However, this Sunstrip is fully active and has a built-in dimmerpack. In order to make the unit most versatile for many applications you can select different DMX modes: 1 channel, 2 channel, 5 channel and 10 channel. For stand-alone applications, the Sunstrip Active is equipped with 16 built in patterns as well as a manual dimmer. With its Neutrik Powercon in- and outputs the Sunstrip is suitable for the most demanding users on the road. For easy mounting the Sunstrip Active is equipped with two Wall/Floor brackets as well as several M10 nuts, in order to put your clamp in any desired position.
Built-in programs
Powercon. in- and output
Mounting/Floor brackets included
Power Supply: 240V/50 Hz
Power Consumption: 750W
Control Mode: DMX (selectable: 1, 2, 5
or 10 channels)
Current: 3,5A
Fuse: F6,3A
Lamp: 10x Showtec 240V/50W
GU10 (82382)
Dimensions: 1000 x 130 x 77 mm
Weight: 5,32 kg
Weight
5.32 kg
Reviews
There are no reviews yet.
Be the first to review “SHOWTEC 30710 Sunstrip Active DMX Incl. lamps & Powercon-lead” Cancel reply
The Sunstrip Active is the successor of the already popular Sunstrip I and II. However, this Sunstrip is fully active and has a built-in dimmerpack. In order to make the unit most versatile for many applications you can select different DMX modes: 1 channel, 2 channel, 5 channel and 10 channel. For stand-alone applications, the Sunstrip Active is equipped with 16 built in patterns as well as a manual dimmer. With its Neutrik Powercon in- and outputs the Sunstrip is suitable for the most demanding users on the road. For easy mounting the Sunstrip Active is equipped with two Wall/Floor brackets as well as several M10 nuts, in order to put your clamp in any desired position.
Built-in programs
Powercon. in- and output
Mounting/Floor brackets included
Power Supply: 240V/50 Hz
Power Consumption: 750W
Control Mode: DMX (selectable: 1, 2, 5
or 10 channels)
Current: 3,5A
Fuse: F6,3A
Lamp: 10x Showtec 240V/50W
GU10 (82382)
Dimensions: 1000 x 130 x 77 mm
Weight: 5,32 kg
Cameo THUNDER WASH 600 RGB 3 in 1 Strobe, Blinder and Wash Light 648 x 0.2 W RGB
Strobe, Blinder and Wash Light all in one
648 RGB SMD LEDs
1 to 30 flashes/sec adjustable
DMX, Sound- and manual control
Master, Slave and Standalone operation
Rugged metal housing with universal mounting bracket
The Thunder Wash 600 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 648 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 600 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
Product type
LED Strobes
Type
Strobe / Blinder / Washer
Colour spectrum
RGB
Number of LEDs
648
LED type
0.2 W
Dispersion
80 °
Refresh rate
1 - 30 Hz
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
1-channel , 2-channel 1 , 2-channel 2 , 3-channel 1 , 3-channel 2 , 3-channel 3 , 4-channel , 6-channel
DMX Functions
Dimmer , Flash duration , Flash rate
Standalone modes
Dimmer Mode , Flash rate , slave mode , sound control
Controls
mode , Value Down , Value Up
Indicators
LED Display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
130 W
Power connector
IEC power connector male
Housing material
metal
Cabinet colour
Black
Dimensions without mounting bracket
Width
335 mm
Height
93 mm
Depth
182 mm
Weight
1,8 kg
Cameo THUNDER WASH 100 RGB
3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB
Strobe, Blinder and Wash Light all in one
132 RGB SMD LEDs
1 to 30 flashes/sec adjustable
DMX, Sound- and manual control
Master, Slave and Standalone operation
Rugged metal housing with universal mounting bracket
Low power consumption
The Thunder Wash 100 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 100 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps.
Technical Info
Type: Dynamic, Moving coil.
Freq.Resp.: 40 to 16.500 Hz.
Polar Pattern: Cardioid
Sensitivity (1000Hz): 1,7 mV/Pa*
(*1 Pa = 94 dB SPL)
Max SPL: 137dB
Impedance: 600 Ohm
Power supply: none
Connector: 3p. XLR male-type).
Net. Weight: 245 g
Dimensions: (Ø 32 mm x L 157 mm)
Accessories: 6 mtr balanced cable
with XLR plugs
Eurolite Plasma Ball 20cm
Exciting effect
An extraordinary decoration for party-rooms, shops, etc.
Blue light-beams hit through the plasma-ball
The light-beams concentrate where the ball is touched
Mode-selector Off/On/Audio
Sound-controlled via built-in microphone
Including DC 9 V power-unit
Simply plug it in - ready!
Power supply: 230 V AC, 50 Hz ~
via DC 9 V power-unit included in the delivery
Power consumption: 4 W
Sound-control: Via built-in microphone
Dimensions (LxWxH): 200 x 200 x 290 mm
Weight: 1 kg
Audience Blinder,8xPAR-36,black
High-quality stage version
* For 8 PAR 36-lamps
* Each lamp is individually connected to an internal lustre terminal,
so that any lamps of your choice can easily be wired
* Extreme and lightning-fast light displays
* With horizontally adjustable lamp rows for even more possibilities
SPECIFICATIONS:
Power supply: 230 V AC, 50 Hz ~
Power consumption: 5200 W
Dimensions (LxWxH): 770 x 400 x 100 mm
Weight: 7 kg
On-period: 3 minutes
Cooling time: 3 minutes
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Daslight V3 fixtures
Reviews
There are no reviews yet.