The Sunstrip Active is the successor of the already popular Sunstrip I and II. However, this Sunstrip is fully active and has a built-in dimmerpack. In order to make the unit most versatile for many applications you can select different DMX modes: 1 channel, 2 channel, 5 channel and 10 channel. For stand-alone applications, the […]
The Sunstrip Active is the successor of the already popular Sunstrip I and II. However, this Sunstrip is fully active and has a built-in dimmerpack. In order to make the unit most versatile for many applications you can select different DMX modes: 1 channel, 2 channel, 5 channel and 10 channel. For stand-alone applications, the Sunstrip Active is equipped with 16 built in patterns as well as a manual dimmer. With its Neutrik Powercon in- and outputs the Sunstrip is suitable for the most demanding users on the road. For easy mounting the Sunstrip Active is equipped with two Wall/Floor brackets as well as several M10 nuts, in order to put your clamp in any desired position.
Built-in programs
Powercon. in- and output
Mounting/Floor brackets included
Power Supply: 240V/50 Hz
Power Consumption: 750W
Control Mode: DMX (selectable: 1, 2, 5
or 10 channels)
Current: 3,5A
Fuse: F6,3A
Lamp: 10x Showtec 240V/50W
GU10 (82382)
Dimensions: 1000 x 130 x 77 mm
Weight: 5,32 kg
Weight
5.32 kg
Reviews
There are no reviews yet.
Be the first to review “SHOWTEC 30710 Sunstrip Active DMX Incl. lamps & Powercon-lead” Cancel reply
The Sunstrip Active is the successor of the already popular Sunstrip I and II. However, this Sunstrip is fully active and has a built-in dimmerpack. In order to make the unit most versatile for many applications you can select different DMX modes: 1 channel, 2 channel, 5 channel and 10 channel. For stand-alone applications, the Sunstrip Active is equipped with 16 built in patterns as well as a manual dimmer. With its Neutrik Powercon in- and outputs the Sunstrip is suitable for the most demanding users on the road. For easy mounting the Sunstrip Active is equipped with two Wall/Floor brackets as well as several M10 nuts, in order to put your clamp in any desired position.
Built-in programs
Powercon. in- and output
Mounting/Floor brackets included
Power Supply: 240V/50 Hz
Power Consumption: 750W
Control Mode: DMX (selectable: 1, 2, 5
or 10 channels)
Current: 3,5A
Fuse: F6,3A
Lamp: 10x Showtec 240V/50W
GU10 (82382)
Dimensions: 1000 x 130 x 77 mm
Weight: 5,32 kg
Cameo THUNDER WASH 600 W 3 in 1 Strobe, Blinder and Wash Light 648 x 0.2 W white
Strobe, Blinder and Wash Light all in one
648 white SMD LEDs
1 to 30 flashes/sec adjustable
DMX, Sound- and manual control
Master, Slave and Standalone operation
Rugged metal housing with universal mounting bracket
4-zone segment control for spectacular chase effects
The Thunder Wash 600 W is a Strobe, Blinder and Wash Light all in one. It is equipped with 648 white 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 600 W comes with 3-pin XLR sockets for DMX input and output, 5 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
DAP AUDIO D8560 professional stand for larger bench mixers, equipped with weels. Its pratical shape, simplifies mobility and gives more stability when placed on the ground. Made of steel painted in black.
Technical Info
Weight (net): 22.5kg
Weight (gross): 23 kg
Height: 85 cm
Usefull Depth: 1265 mm
Maximum Carriage Capacity (Load) : 250 Kg
Dimensions: 1370x865x865mm (LxWxH)
Cameo MATRIX PANEL 10 W RGB 5 x 5 RGB LED Matrix Panel with Single Pixel Control
5 x 5 Matrix Panel with single pixel control
25 x 10 W RGB LEDs
5 DMX modes, sound activation and built-in auto run programs
Master, slave and standalone capability
Blinder, chase and strobe effects
Alphabetic character and numeral mapping
4 selectable dimming curves
Flicker-free operation
Ultra flat housing with low-noise fan
Even more impressive in multiples
With a 5 x 5 array of 10 watt RGB LEDs, 40° beam spread and flicker-free performance the Cameo Matrix Panel creates exciting blinder, chase and strobe effects. Featuring powerful single pixel control, it is the perfect choice for mapping alphabetic characters, numerals and complete messages. Recessed latches on all sides enable joining multiple panels for large, impressive backdrops.
The Matrix Panel 10 RGB includes five modes of DMX control, sound activation, built-in auto run programs and 4 selectable dimming curves. It sports master, slave and standalone capability, a bright 4-button display plus a low-noise fan for cool and quiet operation. The ultra flat all-metal housing provides 3 and 5-pin DMX inputs and outputs and Power Twist connectors for easy daisy-chaining. The Matrix Panel comes with a safety eye, swivel bracket and two omega brackets and runs on all voltages from 100 - 240 volts AC.
Product type
LED MATRIX PANEL
Type
5 X 5 Matrix
Colour spectrum
RGB
Number of LEDs
25
LED type
10 W RGB
Dispersion
40 °
Refresh rate
8000 Hz
DMX input
XLR 3-pin male
DMX output
XLR 3-pin female
DMX mode
19-channel , 28-channel , 3-channel , 5-channel , 78-channel
DMX Functions
Auto programs , Dimmer Fine , master dimmer , sound programs , Stroboscope
Standalone modes
Master / Slave mode , Music control
Controls
Down , Enter , Mode , Up
Indicators
4-digit LED display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
180 W
Power connector
Blue and white power I/O
Housing material
metal
Cabinet colour
Black
Cooling
fan
Fuse
F3AL / 250 V
Illuminance
6950lx @ 1m
Width
580 mm
Height
580 mm
Depth
125 mm
Weight
13,7 kg
Accessories (included)
swivel bracket , 2x Omega Mounting Bracket , LED MATRIX PANEL , safety eyelet
Cameo THUNDER WASH 100 RGB
3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB
Strobe, Blinder and Wash Light all in one
132 RGB SMD LEDs
1 to 30 flashes/sec adjustable
DMX, Sound- and manual control
Master, Slave and Standalone operation
Rugged metal housing with universal mounting bracket
Low power consumption
The Thunder Wash 100 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 100 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps.
Technical Info
Type: Dynamic, Moving coil.
Freq.Resp.: 40 to 16.500 Hz.
Polar Pattern: Cardioid
Sensitivity (1000Hz): 1,7 mV/Pa*
(*1 Pa = 94 dB SPL)
Max SPL: 137dB
Impedance: 600 Ohm
Power supply: none
Connector: 3p. XLR male-type).
Net. Weight: 245 g
Dimensions: (Ø 32 mm x L 157 mm)
Accessories: 6 mtr balanced cable
with XLR plugs
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.