LED Orbit I LED Moving Head The Orbit One is the first LED moving head by Showtec. It is a powerful moving head which is equipped with 36 1W LED’s, offering an enormous light output. The RGB colour mixing provides an unlimited selection of colours to the user. It has a precise and accurate […]
The Orbit One is the first LED moving head by Showtec. It is a powerful moving head which is equipped with 36 1W LED’s, offering an enormous light output.
The RGB colour mixing provides an unlimited selection of colours to the user. It has a precise and accurate 16 bit movement as well as auto-correction on pan and tilt movement.
Specifications
• Power Supply 90-250V AC, 47-63 Hz
• Power consumption: 70W
• LED/unit: 36 x 1W LED
(12 x Red, 12 x Green, 12 x Blue)
• Beam Angle 50 degree
• 16 bit resolution
• 540 degree pan movement
• 270 degree tilt movement
• RGB colour mixing
• Dimmer 0-100%
• Strobe 1-25 Hz
• Dimensions: 350 x 290 x 300 mm
• Max. ambient temp. 40 degrees
• DMX-512 (12 channels)
• Master/Slave function
• Stand alone function
The Orbit One is the first LED moving head by Showtec. It is a powerful moving head which is equipped with 36 1W LED's, offering an enormous light output.
The RGB colour mixing provides an unlimited selection of colours to the user. It has a precise and accurate 16 bit movement as well as auto-correction on pan and tilt movement.
Specifications
• Power Supply 90-250V AC, 47-63 Hz
• Power consumption: 70W
• LED/unit: 36 x 1W LED
(12 x Red, 12 x Green, 12 x Blue)
• Beam Angle 50 degree
• 16 bit resolution
• 540 degree pan movement
• 270 degree tilt movement
• RGB colour mixing
• Dimmer 0-100%
• Strobe 1-25 Hz
• Dimensions: 350 x 290 x 300 mm
• Max. ambient temp. 40 degrees
• DMX-512 (12 channels)
• Master/Slave function
• Stand alone function
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
Introducing the new Korg nanoSERIES. These USB-powered, slim-line controllers are designed to make the most of your valuable studio space, and are small enough to take with you on any musical journey. Place one in front of your laptop, rest one on your workstation, park one on a recording console - or anywhere else you need versatile control over your DAW, virtual instrument, effect or DJ software. Small in size, all three controllers go HUGE when it comes to functionality, yet their intuitive layouts provide extremely easy operation for any user.
So c'mon; meet the nanos! The nanoKEY features a great-feeling 25-key velocity-sensitive keyboard that's ideal for song production. Each key can also be set to send MIDI control data, further expanding its power. Next up is the nanoPAD, featuring 12 highly responsive trigger pads, each capable of sending up to eight notes - or eight MIDI control messages - simultaneously, in addition to an X-Y touchpad with roll and flam functions for realistic drum programming. Last but not least, nanoKONTROL offers nine faders, nine knobs, 18 switches, plus a full transport section for expansive control; even a flexible note input mode to help you lay down your next big groove!
nanoPAD SPECIFICATIONS
Controllers
12 trigger pads with velocity and 4 velocity curves
X-Y pad
ROLL button
FLAM button
HOLD button
SCENE buttons (SCENE 1-4)
Memory
4 user scene memories
Connections
mini-USB
Power
USB bus power
Power Consumption
USB bus power: less than 100 mA
Others
Dimensions: 320(W) x 82(D) x 16.5(H) mm/ 12.60“(W) x 3.23“(D) x 00.65“(H)
Weight: 330g/ 0.73lbs.
Accessories: USB cable
Antari S-120 is a reliable and eco-friendly foam generator. Produces clear and bubbly foam suitable for wide variety of applications. Simply turn on the machine to generate foam continuously, space will be filled up with foam in minutes. With specially calibrated SL foam fluid produces high quality foam which are safe, clean and odorless. This compact and easy to operate machine is designed for small to medium size parties, stage and venues.
- Input voltage :US model : AC 100-120V, 50 / 60Hz 7.5A EU model : AC 220-240V, 50 / 60Hz 3.8A - Rated power :880W - Fluid consumption : 350 ml/min - Fluid tank capacity : 5l (1.32gal) - Compatible fluid : Antari SL Snow Foam Fluid - Cameo SNOW FLUID CLFSNOW5L - SHOWTEC 80358 - Operating time : 14 mins at max. output - Ambient temp. range :5 °C - 40 °C (41 °F-104 °F) - Control : Manual - Remote: included - Connection : IEC (Power) - Bracket: included - Dimension : L600 W260 H280(221) mm (L23.62 W10.24 H11.02 inch) Weight : 12 kg (26.46 lbs)
The JVM Series from Marshall is the most comprehensive range of professional, all-valve amplifiers ever offered. No other multi-channel, multi-mode amplifier delivers the amazing all-valve tone offered by the JVM at any price. Multiple, all-valve voicings provide an amazing array of tones which are accessible from the front-panel switches, MIDI or via the revolutionary technology of the supplied footswitch. Hailed as a breakthrough in amplification by the worldʼs guitar press, the JVM Series offers a powerstage built on the peerless EL34 designs responsible for the legendary Marshall roar.
Outstanding Tone
The JVM Series uses a carefully designed, 4 x ECC83 pre-amp stage to generate the desired amount of gain, from the cleanest, yet complex, clean imaginable to a vast palette of overdrives that range from sophisticated and subtle to explosive and extreme. Boasting a truly amazing array of instantly switchable sounds, overflowing with harmonically rich tones and responsive fluidity, every JVM mode exudes that unmistakable Marshall sound and expands on it, effectively offering multiple Marshalls in one easy-to-use package.
Ultimate Flexibility
Each totally independent JVM channel offers three footswitchable modes which progressively add gain while offering a complimentary tonal topology, making the JVM the perfect amplifier for any situation.
Seamless, Silent Switching
Ultimate Control and Connectivity
Every JVM is supplied with a fully programmable footswitch. This revolutionary, patent-pending technology allows single front panel switching (SWITCH STORE) or entire set-ups (PRESET STORE – Channel/Mode, Reverb, FX Loop, Master Volume) to be simply assigned to any footswitch . . . or, even cooler, a mix ʽnʼ match of both modes. Housed in a rugged metal casing with blank panels on its surface which allow the user to label the pedal exactly as they want, the JVM pedal has no restrictive factory set-ups or functionality barriers, plus itʼs a breeze to program. The multi-coloured LEDs reflect every front panel switch status so you know exactly where you are, in the heat of a performance, without the need to glance at the amplifier itself.
The JVMʼs MIDI In and Thru connection means it can easily be integrated in a MIDI switching set-up, allowing you to store and recall 128 amplifier set-ups and enabling your MIDI effects board to easily control the amp. With its built-in memory and switching options the possibilities are endless!
Studio-Quality Reverb
Effective Control
Each JVM boasts two FX Loops that live on its rear panel. A footswitchable Parallel/Series Loop with Level and Mix controls plus a Series Loop with a Bypass switch. Combine the JVM with a MIDI FX processor and a MIDI footswitch and the skyʼs the limit!
The Tone of the Cone
In the case of the 2x12 in. JVM combos, after exhaustive testing of every speaker available, all agreed that the pairing of a Marshall/Celestion ʽHeritageʼ with a Marshall/Celestion ʽVintageʼ was the only way to go as the combination produces a fantastic depth and breadth of sound while maintaining a tight, musical response and a solid low-end thump. In the case of the 50 Watt 1x12”combo, a Celestion G12B delivers a full, wide sound that is much "bigger” than the JVM215Cʼs compact size would suggest.
Every JVM is made at the Marshall factory in the heart of England. Time-tested craftsmanship and construction are combined with the latest advances in manufacturing technology, ensuring world-class build quality and roadworthiness.
Internally, the JVM circuitry and layout has been kept as simple and logical as possible, ensuring the integrity of the guitar tone and an incredibly low noise-floor for such a high gain beast. Four, double-sided PCBs are used and connections are kept to a minimum to ensure maximum reliability. Only the best components are used to ensure very high quality and all of the internal wiring and amplifier assembly is performed by hand. Strict quality controls ensure every unit made is worthy of the world-renowned and respected white script Marshall logo. Meticulous valve selection adds further to the all-important tone and reliability that are both synonymous with the Marshall legend.
Technical Info
Output (RMS): 100 Watts
Speakers: No
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 1 x ECC83, 4 x EL34
Footswitch (Supplied): PEDL-00045
Dimensions (Millimeters): 750 x 310 x 215
Weight: 22 kg, 48.5 lbs
PDU-10 Powerdistributor with Volt- and Ampere meter The DAP PDU-10 is a 19" powerdistributor (240V) for use in equipment-and effect-rack.
It has 8 IEC outputs which can be switched by the switch on the front of the unit.
Furthermore, the PDU-10 has a Volt and Ampere meter on the front so that you can control the voltage and current at any time in order to maximise the protection of your equipment. 240 Volt
8 IEC Outputs
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
240 Volt
8 IEC Outputs
Reviews
There are no reviews yet.