| Content |
LED Orbit I
LED Moving Head
The Orbit One is the first LED moving head by Showtec. It is a powerful moving head which is equipped with 36 1W LED's, offering an enormous light output.
The RGB colour mixing provides an unlimited selection of colours to the user. It has a precise and accurate 16 bit movement as well as auto-correction on pan and tilt movement.
Specifications
• Power Supply 90-250V AC, 47-63 Hz
• Power consumption: 70W
• LED/unit: 36 x 1W LED
(12 x Red, 12 x Green, 12 x Blue)
• Beam Angle 50 degree
• 16 bit resolution
• 540 degree pan movement
• 270 degree tilt movement
• RGB colour mixing
• Dimmer 0-100%
• Strobe 1-25 Hz
• Dimensions: 350 x 290 x 300 mm
• Max. ambient temp. 40 degrees
• DMX-512 (12 channels)
• Master/Slave function
• Stand alone function
|
| DAP AUDIO D8560 professional stand for larger bench mixers, equipped with weels. Its pratical shape, simplifies mobility and gives more stability when placed on the ground. Made of steel painted in black.
Technical Info
Weight (net): 22.5kg
Weight (gross): 23 kg
Height: 85 cm
Usefull Depth: 1265 mm
Maximum Carriage Capacity (Load) : 250 Kg
Dimensions: 1370x865x865mm (LxWxH) | Installer version of the Mobile 8, for wall or ceiling mount. Rec. amp power (non clipping): up to 300W RMS / 8ohms (electronically high pass filtered 24dB/oct at 200 Hz or higher) Peak SPL: 120dB Impedance: 6 ohms Dimensions: 49,2 x 59,2 x 5,5 cm; frame 1,5 cm thick
8 exciter engine. Frame can be painted in accordance with the interior. Panel is available in several colours or in an easy-to-paint-yourself version. Ceiling Version |
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
|
Black 1,28-2,08m/
30kg
Technical Info
Weight: 8,58 kg
Max. Load: 30 kg
Diameter: 35 mm
Length; max. 2,08 m
| The JVM Series from Marshall is the most comprehensive range of professional, all-valve amplifiers ever offered. No other multi-channel, multi-mode amplifier delivers the amazing all-valve tone offered by the JVM at any price. Multiple, all-valve voicings provide an amazing array of tones which are accessible from the front-panel switches, MIDI or via the revolutionary technology of the supplied footswitch. Hailed as a breakthrough in amplification by the worldʼs guitar press, the JVM Series offers a powerstage built on the peerless EL34 designs responsible for the legendary Marshall roar.
Outstanding Tone
The JVM Series uses a carefully designed, 4 x ECC83 pre-amp stage to generate the desired amount of gain, from the cleanest, yet complex, clean imaginable to a vast palette of overdrives that range from sophisticated and subtle to explosive and extreme. Boasting a truly amazing array of instantly switchable sounds, overflowing with harmonically rich tones and responsive fluidity, every JVM mode exudes that unmistakable Marshall sound and expands on it, effectively offering multiple Marshalls in one easy-to-use package.
Ultimate Flexibility
Each totally independent JVM channel offers three footswitchable modes which progressively add gain while offering a complimentary tonal topology, making the JVM the perfect amplifier for any situation.
Seamless, Silent Switching
Ultimate Control and Connectivity
Every JVM is supplied with a fully programmable footswitch. This revolutionary, patent-pending technology allows single front panel switching (SWITCH STORE) or entire set-ups (PRESET STORE – Channel/Mode, Reverb, FX Loop, Master Volume) to be simply assigned to any footswitch . . . or, even cooler, a mix ʽnʼ match of both modes. Housed in a rugged metal casing with blank panels on its surface which allow the user to label the pedal exactly as they want, the JVM pedal has no restrictive factory set-ups or functionality barriers, plus itʼs a breeze to program. The multi-coloured LEDs reflect every front panel switch status so you know exactly where you are, in the heat of a performance, without the need to glance at the amplifier itself.
The JVMʼs MIDI In and Thru connection means it can easily be integrated in a MIDI switching set-up, allowing you to store and recall 128 amplifier set-ups and enabling your MIDI effects board to easily control the amp. With its built-in memory and switching options the possibilities are endless!
Studio-Quality Reverb
Effective Control
Each JVM boasts two FX Loops that live on its rear panel. A footswitchable Parallel/Series Loop with Level and Mix controls plus a Series Loop with a Bypass switch. Combine the JVM with a MIDI FX processor and a MIDI footswitch and the skyʼs the limit!
The Tone of the Cone
In the case of the 2x12 in. JVM combos, after exhaustive testing of every speaker available, all agreed that the pairing of a Marshall/Celestion ʽHeritageʼ with a Marshall/Celestion ʽVintageʼ was the only way to go as the combination produces a fantastic depth and breadth of sound while maintaining a tight, musical response and a solid low-end thump. In the case of the 50 Watt 1x12”combo, a Celestion G12B delivers a full, wide sound that is much "bigger” than the JVM215Cʼs compact size would suggest.
Every JVM is made at the Marshall factory in the heart of England. Time-tested craftsmanship and construction are combined with the latest advances in manufacturing technology, ensuring world-class build quality and roadworthiness.
Internally, the JVM circuitry and layout has been kept as simple and logical as possible, ensuring the integrity of the guitar tone and an incredibly low noise-floor for such a high gain beast. Four, double-sided PCBs are used and connections are kept to a minimum to ensure maximum reliability. Only the best components are used to ensure very high quality and all of the internal wiring and amplifier assembly is performed by hand. Strict quality controls ensure every unit made is worthy of the world-renowned and respected white script Marshall logo. Meticulous valve selection adds further to the all-important tone and reliability that are both synonymous with the Marshall legend.
Technical Info
Output (RMS): 100 Watts
Speakers: No
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 1 x ECC83, 4 x EL34
Footswitch (Supplied): PEDL-00045
Dimensions (Millimeters): 750 x 310 x 215
Weight: 22 kg, 48.5 lbs |
Reviews
There are no reviews yet.