showtec 43071T X-Ray Wave COLOR CHANGER

No longer available!

188.31 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: 43071T Category:
X-Ray Wave • Combines glow & beam effects in one unit • Floor-to-ceiling, wall-to-wall coverage due to 32 lenses • Auto run selectable by DMX • 5 Operation modes • Light weight, low power consumption, long lifetime     The X-ray Wave fills your room with beams and gives a color changing glow effect in […]

 

Read more

X-Ray Wave
• Combines glow & beam effects in one unit
• Floor-to-ceiling, wall-to-wall coverage due to 32 lenses
• Auto run selectable by DMX
• 5 Operation modes
• Light weight, low power consumption, long lifetime
 

 

The X-ray Wave fills your room with beams and gives a color changing glow effect in once. Due to the transparent housing it not only creates beams but the color of the beams is also the color of the glow on the housing. Two effects in one unit! It has more lenses than the conventional derby effects which creates a floor-to-ceiling and wall-to-wall coverage with sharp beams. Check out the specifications and manual for more info and watch both product videos to see the difference between the black XB-Wave (43071) and the transparent X-ray Wave.

 

 

 

 

 

Specifications
Power Input: Auto switching 100V – 240V
50/60 Hz
Power Consumption: 24W
Light Source: 2 x 9 Watt LED RGB 3-in-1
Control: Auto, Sound, Custom,
Master/Slave, DMX
DMX Channels: 4
Addressing: Dipswitch
Power Connector: IEC
Data Connector: In/Out (XLR 3 Pin)
Coverage angle: 135˚
Dimensions: 305 x 325 x 258 mm
Weight: 2,4 kg

 

 

Weight 2.40 kg

Reviews

There are no reviews yet.

Be the first to review “showtec 43071T X-Ray Wave COLOR CHANGER”

Your email address will not be published. Required fields are marked *

Quick Comparison

showtec 43071T X-Ray Wave COLOR CHANGER removeEUROLITE LED TSL-400 SCAN LED ROMBOT 60W 8 COLOURS & 7 ΠΕΡ. ΣΧΕΔΙΩΝ removeWork Par 3 DMX Colour Changer removeEUROLITE LED DMF-4 Hybrid Flower Effect incl. IR remote control removeEUROLITE LED KLS-406 RGB SET LIGHT WITH 6 RGB removeSHOWTEC 31309 Starzone Led Flower Effect remove
Nameshowtec 43071T X-Ray Wave COLOR CHANGER removeEUROLITE LED TSL-400 SCAN LED ROMBOT 60W 8 COLOURS & 7 ΠΕΡ. ΣΧΕΔΙΩΝ removeWork Par 3 DMX Colour Changer removeEUROLITE LED DMF-4 Hybrid Flower Effect incl. IR remote control removeEUROLITE LED KLS-406 RGB SET LIGHT WITH 6 RGB removeSHOWTEC 31309 Starzone Led Flower Effect remove
ImageEUROLITE LED DMF-4 Hybrid Flower Effect31309 starzone light effect flower led showtec
SKU43071TLED TSL-400 SCANPAR3DMX51918563LED KLS-406 RGB31309
Rating
Price 188.31 incl. GR VAT 474.82 incl. GR VAT 292.86 incl. GR VAT113.93 incl. GR VAT 543.37 incl. GR VAT 55.79 incl. GR VAT
Stock

Out of stock

In stock

In stock

Only 1 left in stock (can be backordered)

In stock

Only 1 left in stock

AvailabilityOut of stockIn stockIn stockOnly 1 left in stock (can be backordered)In stockOnly 1 left in stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

X-Ray Wave
• Combines glow & beam effects in one unit
• Floor-to-ceiling, wall-to-wall coverage due to 32 lenses
• Auto run selectable by DMX
• 5 Operation modes
• Light weight, low power consumption, long lifetime
 

 

The X-ray Wave fills your room with beams and gives a color changing glow effect in once. Due to the transparent housing it not only creates beams but the color of the beams is also the color of the glow on the housing. Two effects in one unit! It has more lenses than the conventional derby effects which creates a floor-to-ceiling and wall-to-wall coverage with sharp beams. Check out the specifications and manual for more info and watch both product videos to see the difference between the black XB-Wave (43071) and the transparent X-ray Wave.

 

 

 

 

 

Specifications
Power Input: Auto switching 100V - 240V
50/60 Hz
Power Consumption: 24W
Light Source: 2 x 9 Watt LED RGB 3-in-1
Control: Auto, Sound, Custom,
Master/Slave, DMX
DMX Channels: 4
Addressing: Dipswitch
Power Connector: IEC
Data Connector: In/Out (XLR 3 Pin)
Coverage angle: 135˚
Dimensions: 305 x 325 x 258 mm
Weight: 2,4 kg

 

 

LED TSL-400 SCAN Features: > Equipped with one 60 W LED > Long LED life > DMX-controlled operation or stand-alone operation with Master/Slave function > Sound-controlled via built-in microphone > Microphone sensitivity adjustable via rotary control > Color wheel with 7 dichroic color filters and white > Gobo-wheel with 7 rotating gobos plus open > Strobe effect with adjustable speed > Manual focus > Electronic dimmer > Fan-cooled > Lightbeam with 14° radiation angle > Control board with 4-digit LED display for adjusting the DMX starting address, PAN/TILT reverse > DMX control via every standard DMX controller

Work Par 3 DMX Colour Changer

Nenewed version of PAR 3DMX, now with more functions. DMX colourchanger par 64 spot. With the use of DMX dimmer, this unit can create up. to 16,000,000 colours by mixing RGB colour. This unit can be used widely on stage, club, disco and theaters. 3 DMX Channels. RGB colour mixing system. Full digital Dimming system. Built-in 3 channel dimmer pack. Selectable DMX address. Up to 16.000.000 colour controlled via DMX. 3 operation modes:RGB/Colour/Colour & Bright. Built-in electronic transformer. The new functions for this version are designed for no need a DMX controller. There are three operating modes: DMX MODE: same as previous version with the 3 operating modes: (RGB/Color/Bright& Color) previously descripted. AUTOMATIC MODE: It allows to operate automatically without DMX signal selecting one of the 10 pre-programmed chases, or all of them executing continuouslly. All parameters can be adjusted: max. dimmer , speed and fade. In this mode you can link several PAR 3 DMX with a Master&Slave system, then you can get a perfect sync between themselves. MANUAL MODE: with this mode, the PAR 3 DMX can turned on manually without any DMX signal and automatic programming. In this mode you can dimmer manually each lamp to get the desired colour. Power Input: AC 230V~ 50-60Hz. 3 Lamps: 3*GKV 600 with 15000 lumen each. Loading Fuse: F3.15A. 250V 5x20mm. Internal Fuse: F0.315A 250V 5x20mm.    
  • 2 strips with white LEDs provide fast, dynamic strobe sffects
  • 70 powerful LEDs 5 mm R/G/B
  • 12 powerful LEDs SMD 5050 cold white (CW)
  • Flower effect; Strobe effect
  • 4 integrated show programs
  • Direct color selection for 8 preset colors
  • The device is cooled by passive convection cooling
  • Control via stand-alone; IR remote control; DMX; Sound to light via Microphone; Master/slave function; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional)
  • Preprogrammed in Light Captain
  • With a beam angle of 37°
  • With Mounting bracket
  • 4 digit 7-segment LED display
Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 10 W
IP classification: IP20
Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Fuse: T 0,5 A Fuse replaceable
LED: 70 x 5 mm R/G/B 12 x SMD 5050 cold white (CW)
DMX channels: 7
DMX input: 3-pin XLR (M) mounting version
DMX output: 3-pin XLR (F) mounting version
Cooling: Passive convection cooling
Control: Stand-alone; IR remote control; DMX; Sound to light via Microphone; Master/slave function; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional)
Preprogrammed in: Light Captain
Beam angle: 37°
Beam angle (1/2 peak): 37°
Housing color: Black
Attachment system: Mounting bracket
Display type: 4 digit 7-segment LED display
Dimensions: Length: 19,4 cm Width: 20,2 cm Height: 12,3 cm
Weight: 1,30 kg
Remote control
Battery: 1 x Button cell 3.0 V CR2025 lithium manganese built-in
Legal specifications
Special product: Not designed for household room illumination
Intended use: Show effect lighting

LED KLS-406 Compact lightset DMX LED spotlight set with RGB LEDs for mobile use Features: > Complete LED light set consisting of slimline 6 spots and a crossbar with integrated DMX control unit and stand adaptor > Ultra-light ideally suited for mobile use > Practical flight case optional > 180 x 10 mm LED per spot (60 x red, 60 x green, 60 x blue) > Movable and tiltable spotlights > DMX-controlled operation or stand-alone operation with processor-controlled color change > Master/Slave operation > Sound-control via built-in microphone with sensitivity control > Convenient control possible via optional 4-pedal foot pedal FP-1 (preset, sound control, freeze, blackout) > DMX512 control via regular DMX controller (occupies 21 channels) > Via DMX, each spot can be individually controlled > DMX functions: dimmer, automatic mode, music control, strobe effect > Addressing and setting via control panel with 4-digit LED display > Suited for installation on a lighting stand (not included) or truss > Spots in black plastic housing > Ideal for bands, stages or solo entertainers > Ready for connection with power cord and safety plug

31309 Showtec Light Effect Starzone

Description and technical specifications

Description Starzone LED Flower Effect on LED

- High light output
- Trendy housing - Control from Music
- LED light source

Technical Specifications Starzone LED Flower Effect LED based on LED

Power supply: AC 230V 50/60 Hz
Power consumption: 30 Watt max.
LED: 64 x 1/4W
Operation Mode: Control from Music
Dimensions (LxPxH): 300 x 340 x 200 mm
Weight: 4.5 kg    
Weight2.40 kg4.00 kg4.65 kg1.31 kg8.00 kg5 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.40 kg
Weight 4.00 kg
Weight 4.65 kg
Weight 1.31 kg
Weight 8.00 kg
Weight 5 kg