Content |
Specifications Power Input: 230V / 50 Hz
Power Consumption: 5W
Light Source: 18 x 5mm LEDs (red green blue white colors)
Beam angle: +/- 50 Degrees
Control: Sound sensitivity, Color & Speed
Power Connector: IEC
Dimensions: 260 x 150 x 125mm
Weight: 0.9Kg |
|
Work Par 3 DMX Colour Changer
Nenewed version of PAR 3DMX, now with more functions. DMX colourchanger par 64 spot. With the use of DMX dimmer, this unit can create up. to 16,000,000 colours by mixing RGB colour. This unit can be used widely on stage, club, disco and theaters. 3 DMX Channels. RGB colour mixing system. Full digital Dimming system. Built-in 3 channel dimmer pack. Selectable DMX address. Up to 16.000.000 colour controlled via DMX. 3 operation modes:RGB/Colour/Colour & Bright. Built-in electronic transformer. The new functions for this version are designed for no need a DMX controller. There are three operating modes: DMX MODE: same as previous version with the 3 operating modes: (RGB/Color/Bright& Color) previously descripted. AUTOMATIC MODE: It allows to operate automatically without DMX signal selecting one of the 10 pre-programmed chases, or all of them executing continuouslly. All parameters can be adjusted: max. dimmer , speed and fade. In this mode you can link several PAR 3 DMX with a Master&Slave system, then you can get a perfect sync between themselves. MANUAL MODE: with this mode, the PAR 3 DMX can turned on manually without any DMX signal and automatic programming. In this mode you can dimmer manually each lamp to get the desired colour. Power Input: AC 230V~ 50-60Hz. 3 Lamps: 3*GKV 600 with 15000 lumen each. Loading Fuse: F3.15A. 250V 5x20mm. Internal Fuse: F0.315A 250V 5x20mm.
|
- 2 strips with white LEDs provide fast, dynamic strobe sffects
- 70 powerful LEDs 5 mm R/G/B
- 12 powerful LEDs SMD 5050 cold white (CW)
- Flower effect; Strobe effect
- 4 integrated show programs
- Direct color selection for 8 preset colors
- The device is cooled by passive convection cooling
- Control via stand-alone; IR remote control; DMX; Sound to light via Microphone; Master/slave function; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional)
- Preprogrammed in Light Captain
- With a beam angle of 37°
- With Mounting bracket
- 4 digit 7-segment LED display
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
10 W |
IP classification: |
IP20 |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Fuse: |
T 0,5 A Fuse replaceable |
LED: |
70 x 5 mm R/G/B
12 x SMD 5050 cold white (CW) |
DMX channels: |
7 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Cooling: |
Passive convection cooling |
Control: |
Stand-alone; IR remote control; DMX; Sound to light via Microphone; Master/slave function; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional) |
Preprogrammed in: |
Light Captain |
Beam angle: |
37° |
Beam angle (1/2 peak): |
37° |
Housing color: |
Black |
Attachment system: |
Mounting bracket |
Display type: |
4 digit 7-segment LED display |
Dimensions: |
Length: 19,4 cm
Width: 20,2 cm
Height: 12,3 cm |
Weight: |
1,30 kg |
Remote control |
Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
LED KLS-406 Compact lightset DMX LED spotlight set with RGB LEDs for mobile use Features: > Complete LED light set consisting of slimline 6 spots and a crossbar with integrated DMX control unit and stand adaptor > Ultra-light ideally suited for mobile use > Practical flight case optional > 180 x 10 mm LED per spot (60 x red, 60 x green, 60 x blue) > Movable and tiltable spotlights > DMX-controlled operation or stand-alone operation with processor-controlled color change > Master/Slave operation > Sound-control via built-in microphone with sensitivity control > Convenient control possible via optional 4-pedal foot pedal FP-1 (preset, sound control, freeze, blackout) > DMX512 control via regular DMX controller (occupies 21 channels) > Via DMX, each spot can be individually controlled > DMX functions: dimmer, automatic mode, music control, strobe effect > Addressing and setting via control panel with 4-digit LED display > Suited for installation on a lighting stand (not included) or truss > Spots in black plastic housing > Ideal for bands, stages or solo entertainers > Ready for connection with power cord and safety plug |
6 Colourchanger 50W/12V + white. |
Reviews
There are no reviews yet.