Content |
BreakoutBar 7
Splitter CEE 16A 5p. > 2 x CEE 16A 5p.
Compact splitter to split one CEE 16A 5 pole into two CEE 16A 5 pole,
Compact design. Sliding profile for easy mounting of clamps and safety-eyes.
|
Work ESD 10K Automatic Voltage Regulator
It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.
Technical Specifications:
Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm
| 6-fold switching panel for separate switching of 6 safety sockets 70008275
6-fold switching panel for separate switching of 6 safety sockets
- Fully cabled housing with 6 safety sockets
- 6 switches
- Control via on/off switch on device
- With profile rails suitable for (19") approx. 48 cm units
Package contents
- 1 x device, 1 x user manual
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
3680 W |
Output power: |
Max. 1150 W per channal |
Output current: |
Max. 5 A per channal |
Power connection: |
Fixed power supply cord with safety plug |
Cable length: |
Approx. 0,8 m |
Power output: |
6 x Safety contact (F), hinged lid mounting version fused |
Fuse: |
5 x 20 mm, F 6,3 A Fuse replaceable |
Control: |
On/off switch on device |
Control channels: |
6 |
Diameter mounting holes: |
4 x Ø5mm |
Material: |
Metal |
Color: |
Black, matte |
Front panel width: |
(19") approx. 48 cm |
Mounting height: |
Approx. 9 cm (2 U) |
Mounting depth: |
120 mm |
Dimensions: |
Width: 48,3 cm
Depth: 12,5 cm
Height: 8,9 cm |
Weight: |
2,00 kg |
| ESD 5K Automatic Voltage Regulator
Automatic tension regulator. For a tension between 120 V. and 250 V. Maintains the output to 220 V.
Max. load 5.000 W. Input and output connections through bananas. Schuko base output auxiliar regulated.
(max. 2.500 W.). Digital display with information of the input tension, output tension, current and protection.
The protection works by overload or an excesive temperature emitting a sound of advise and disconnecting
the load. It has in its rear panel an auxiliar shuko plug.
Dimensions: 230 x 220 x 370 mm. Weight: 16, 3 kgs. |
Powersplitter 16
Powersplit with fuse
Power input: 380V, 16 Ampere Input connector: 5 pole 16 Ampere CEE Power output: 6 x 230V, 16 Ampere Output connector: Schuko Fuses: 3 * C-16 Dimensions: 403 x 165 x 127 mm (LxWxH) Weight: 3,4 kg | Eurolite SB-1100 Practical 32 A distributor in 19" housing
Practical 32 A distributor in 19" housing
Specially designed for larger distribution needs
3 U necessary for installation
32 A three phase current input via 1.5 meter long 5 x 6 mm?² power cable and plug
32 A three phase current output via mounted plug secured on the back panel by a fault current circuit breaker
The entire distributor is secured via 30 mA fault current circuit breaker
2 mounted CEKON sockets with 16 A on the front panel, secured via 3 x 16 A fuse blocks
Control lamps indicate each phase
6 safety sockets on the housing back (2 per phase)
Each pair of safety sockets feature fuse protection via 16 A automatic circuit breakers
With earthing screw in order to ground a rigg if necessary
Power supply: 380-400 V AC, 50 Hz ~
Max. output/channel (safety socket): 3680 W
Max. current/channel (safety socket): 16 A
Max. output/phase: 7360 W
Max. current/phase: 32 A
Height: 3 U
Dimensions (LxWxH): 482 x 295 x 132 mm
Weight: 6.9 kg |
Reviews
There are no reviews yet.