SHOWTEC 50348 DEMU Multi Exchanger 72CH. DMX to Analogue

271.56 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
  • Convert the signal from DMX512 to 72-Ch ANALOGUE output.
  • Converts DMX back into 0–10 V
  • Converts MIDI back into 0–10 V
  • Midi in and output
  • 3 and 5-pin XLR
  • Last Hold Scene
  • Convert the signal from DMX512 to 72-Ch ANALOGUE output.
  • Converts DMX back into 0–10 V
  • Converts MIDI back into 0–10 V
  • Midi in and output
  • 3 and 5-pin XLR
  • Last Hold Scene

 

Read more

Multi Exchanger 72CH. DMX/Analog 3 & 5 pin – Convert the signal from DMX-512 to 72 CH. ANALOGUE output.
Control Mode DMX, MIDI, Stand Alone
DMX Channels 72
LED Indicators Operation mode, Signal
Maximum Ambient Temperature 35

Power Supply 240 VAC 50-60 Hz

Power Consumption 50
Power Connector in Schuko Plug
DMX Connector XLR 3P In/Out, XLR 5P In/Out
DMX Connector in XLR 3P, XLR 5P
DMX Connector out XLR 3P, XLR 5P
Midi Connector Yes
Width (mm) 126
Height (mm) 44
Installation Depth (excl. connector) 126
Weight 2.6
Rack Units 1
IP Rating IP20 (indoor use only)
Housing Aluminum die-cast
Colour Grey

• Convert the signal from MIDI to 72 CH. ANALOGUE output.
• The front panel alpha-numeric display shows the DMX start address & programming options.
• The last scene remains when DMX disappears.
• Pre-store a scene and is available for emergency.
• Memory backup with EEPROM.
• CHASE function can be selected from 1 to 72 channel & speed control.
• Select ANALOGUE output from +(-)10V, +(-)12V and +(-)15V.
• Receive NOTE ON/OFF signal of MIDI.

Technical Info

Voltage: 230V
Dimensions: 483 x 130 x 45 mm (LxWxH)
Weight: 1,65 kg

Weight 1.65 kg

Reviews

There are no reviews yet.

Be the first to review “SHOWTEC 50348 DEMU Multi Exchanger 72CH. DMX to Analogue”

Your email address will not be published. Required fields are marked *

Quick Comparison

SHOWTEC 50348 DEMU Multi Exchanger 72CH. DMX to Analogue removeEUROLITE LED-PC-CONTROL 512 removeOBSIDIAN NX DMX - USB powered 2 port DMX Node removeMA Lighting 2port Node onPC SECOND HAND removeCAMEO SB 6 T RDM 6-Output DMX/RDM Splitter/Booster with 3 and 5-Pin Connectors removeADJ D6 BRANCH DMX SPLITTER/BOOSTER 1in 6out remove
NameSHOWTEC 50348 DEMU Multi Exchanger 72CH. DMX to Analogue removeEUROLITE LED-PC-CONTROL 512 removeOBSIDIAN NX DMX - USB powered 2 port DMX Node removeMA Lighting 2port Node onPC SECOND HAND removeCAMEO SB 6 T RDM 6-Output DMX/RDM Splitter/Booster with 3 and 5-Pin Connectors removeADJ D6 BRANCH DMX SPLITTER/BOOSTER 1in 6out remove
Image50348 demu demultiplexer converter dmx512 to analogued6_branch_front_8_dmx_splitter_face_1
SKU50348LED-PC-CONTROL 512NX-DMX2port NodeCLSB6TRDM090109
Rating
Price271.56 incl. GR VAT 277.19 incl. GR VAT 333.00 incl. GR VAT 700.00 369.51 incl. GR VAT193.19 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stockAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Convert the signal from DMX512 to 72-Ch ANALOGUE output.
  • Converts DMX back into 0–10 V
  • Converts MIDI back into 0–10 V
  • Midi in and output
  • 3 and 5-pin XLR
  • Last Hold Scene
•6-Way DMX Splitter & amplifier •1x DMX In, 6x DMX Out & 1 DMX Thru (all 3-pin XLR’s) •Link with other D6 Branch Splitters
ContentMulti Exchanger 72CH. DMX/Analog 3 & 5 pin - Convert the signal from DMX-512 to 72 CH. ANALOGUE output.
Control Mode DMX, MIDI, Stand Alone
DMX Channels 72
LED Indicators Operation mode, Signal
Maximum Ambient Temperature 35
Power Supply 240 VAC 50-60 Hz
Power Consumption 50
Power Connector in Schuko Plug
DMX Connector XLR 3P In/Out, XLR 5P In/Out
DMX Connector in XLR 3P, XLR 5P
DMX Connector out XLR 3P, XLR 5P
Midi Connector Yes
Width (mm) 126
Height (mm) 44
Installation Depth (excl. connector) 126
Weight 2.6
Rack Units 1
IP Rating IP20 (indoor use only)
Housing Aluminum die-cast
Colour Grey
• Convert the signal from MIDI to 72 CH. ANALOGUE output. • The front panel alpha-numeric display shows the DMX start address & programming options. • The last scene remains when DMX disappears. • Pre-store a scene and is available for emergency. • Memory backup with EEPROM. • CHASE function can be selected from 1 to 72 channel & speed control. • Select ANALOGUE output from +(-)10V, +(-)12V and +(-)15V. • Receive NOTE ON/OFF signal of MIDI. Technical Info Voltage: 230V Dimensions: 483 x 130 x 45 mm (LxWxH) Weight: 1,65 kg

LED PC-Control 512 DMX-software with interface Features: > 1 DMX universe > Automatic program generator with X-Pan, Y-Tilt and RGB effects > Graphic patch Eeditor for DMX fixture addressing > Quick fixture profile editor with 3000 files (libraries) included > Advanced Matrix editor to allow all LED configurations > Several menu languages (French, English, German, Chinese) > Full RGB (W/A) color + dimmer management and rendering > Graphic 2D edition of the fixtures > Up to 5120 channels with several plugged interfaces > Fade-in time between programs and scenes > Graphic and user friendly live board that can be operated by touch screen > Colors, dimmer, speed, black out and pause can be managed in live mode > Multiple program triggers > USB 2.0 to 512 DMX channels (2 x 512 channel version is available PC-Control 1024) > Pilot LED to indicate the current DMX signal state > High voltage proof > DMX output speed signal can be configured for perfect DMX line stability and full compatibility with any electronic fixtures (Mab, Break, Delay, frequency 1 to 45 Hz) > Strong aluminum housing that can be wall mounted > Operating system: Mac Os X, Windows 32 or 64 bit (2000, XP, Vista, 7) > CPU: 1 Ghz , RAM memory: 512 Mb, Hard disk space: 150 MB (51860150)

NX DMX

NX DMX is a USB powered 2 port DMX Node. As a member of the innovative ONYX platform from Obsidian Control Systems the NX DMX provides instant access to DMX In and Outputs as well as RDM communication. The device is plug and play and requires no drivers or additional configuration to integrate with ONYX. It is designed to work with any PC but also works with any ONYX console as a fast and affordable way to add two additional DMX ports.NX DMX supports ONYX on PC systems for up to four Universes without any dedicated license. When connected to an ONYX licensed PC or ONYX console the NX DMX is assignable to any one of 255 Universes.NX DMX allows for the full ONYX system to be used in many situations, from small events and tradeshows to clubs and churches. Many technicians utilize ONYX through the NX DMX as an affordable but powerful test station due to ONYX\' outstanding library support.


CONNECTION
  • 2x DMX / RDM Universe In/Out: 5pin locking XLR
  • USB In: USB 2.0 B

    SPECIFICATION
    Physical
    • Weight: 245g (0.6 lbs.)
    • Length: 92 mm (3.7 in.)
    • Width: 82 mm (3.3 in.)
    • Height: 41mm (1.7 in.)

      Electrical

    • 5V over USB
    • 100-240V nominal, 50/60 Hz
    • Maximum current: 300 mA
  • The MA 2Port Node onPC allows the conversion of Ethernet data into DMX data and vice versa. In combination with grandMA2 onPC/grandMA onPC it is also possible to output DMX. If used with grandMA2 onPC, the MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC PRO) and becomes a powerful show controller for smaller applications. Also handy backup solutions for reduced budgets become possible. The MA 2Port Node onPC have integrated power supplies, but they also can be powered over Ethernet. Furthermore couplers and safety wires can be easily attached. Two green LEDs will indicate if DMX traffic is in progress. Both, DMX LEDs and the display’s backlight, can be switched off remotely. The ‘Finder Functionality’ is a clever way to let the console indicate a selected node by flashing its backlight. In turn, a press of a button on the MA 2Port Node onPC will identify it on the console’s display. All MA 2Port Nodes are fully integrated into the MA System. That means easy, comfortable configuration incl. in/out assignment of each node from any grandMA console or grandMA2 onPC/grandMA onPC. It’s also possible to use the nodes with other systems, because they speak MA-Net2, MA-Net and Art-Net, which can be set remotely. The MA 2Port Nodes are also available as flush-mount versions (for EU and US in-wall boxes). Dimensions 160 x 145 x 50 mm Dimensions (inch) 6.3 x 5.7 x 1.9 inch Net weight 1,1kg Net weight (lbs) 2.3 lbs PRICE WITHOUT  V.A.T. 24%
    • Professional 6-output DMX/RDM splitter/booster
    • 6 optically and electronically isolated 3 and 5-pin XLR outputs
    • Compact housing
    • Original Neutrik® connectors for maximum reliability
    • 3 x M10 threaded inserts for a variety of truss mounting options
    • Power and DMX status indicators on front and rear panel
    • Optional 2 U 19" rackmount frames available for one or two SB 6T RDM
    Designed for professional applications and supporting bi-directional communication, the Cameo SB 6T RDM is a 6-output DMX/RDM splitter with two inputs and two parallel thru outputs. It sends the incoming DMX/RDM signal to six separate output ports that are electronically and optically isolated. Each output channel has its own driver to boost the DMX/RDM signal to its original level. All inputs and outputs are fitted with both 3-pin and 5-pin Neutrik® connectors for maximum flexibility and reliability. Front and rear panel LEDs indicate the power and DMX status, and three M10 female threaded inserts facilitate truss mounting. The Cameo SB 6T RDM comes with a powerCON power cord. Product type Other Lighting Accessories
    Type DMX splitter / booster
    DMX inputs 2 (parallel)
    DMX input connectors XLR 3-pin male , XLR 5-pin male
    DMX Thru Outputs 2 (parallel)
    DMX Thru Output Connectors XLR 3-pin female , XLR 5-pin female
    DMX outputs 6
    DMX output connectors XLR 3-pin male , XLR 5-pin male
    Indicators 2 x power LED , 2 x Signal LED
    Mains connector Neutrik® powerCON
    Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
    Operating voltage 100 V AC - 240 V AC, 50 - 60 Hz
    Max. current 6 A
    Power consumption 10 W
    Fuse F1AL / 250V
    Width 185 mm
    Height 77 mm
    Depth 170 mm
    Weight 1,3 kg
    Accessories (included) Power supply
    Signal splitting/amplification is easier now thanks to the D6 Branch from American DJ. This DMX Splitter/Amplifier allows for the easy connection to lighting units and the transmission of signals to them. Lightweight and easy to mount, functions perfectly as a transmission hub for any permanent setup or mobile entertainment system. Do you want to manage your DMX fixtures in a more organized fashion using an easy solution? The D6 Branch from American DJ is the solution you need. The D6 Branch Splitter/Amplifier allows you to make your fixtures easy to manage. By significantly reducing your need for DMX cables in your production you make set-up easier, reduce the risk of a plug failure or tripped over wire, while also making your whole production cleaner and less cluttered. Though lightweight, the D6 Branch is built from high quality materials making it the ideal blend of functionality, durability and portability. This unit is perfect for any club, bar, stage or mobile show looking to reduce their need for wires, decrease set-up time, and eliminate restrictions on where controllers and fixtures can be placed in relation to one another. Modernize your light show production today, go professional with the D6 Branch DMX Splitter/Amplifier from American DJ.
    • 6-Way DMX Splitter & amplifier
    • 1x DMX In, 6x DMX Out & 1 DMX Thru (all 3-pin XLR’s)
    • Link with other D6 Branch Splitters
    • Input & outputs are electrically and optically isolated from each other
    • Includes two straps to securely attach to truss
    • Clamp mount bracket included
    • On/Off power switch
    • Multi-voltage operation: AC 100-240V, 50/60Hz (IEC Socket)
    • Dimensions (LxWxH): 4.75”x5”x6” / 118.5x122.5x153mm
    • Weight: 2.5 lbs/ 1 kg.
     
    Weight1.65 kg1.00 kg0.25 kg2.00 kg1.30 kg1 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 1.65 kg
    Weight 1.00 kg
    Weight 0.25 kg
    Weight 2.00 kg
    Weight 1.30 kg
    Weight 1 kg