Content | Multi Exchanger 72CH. DMX/Analog 3 & 5 pin - Convert the signal from DMX-512 to 72 CH. ANALOGUE output.
Control Mode DMX, MIDI, Stand Alone
LED Indicators Operation mode, Signal
Maximum Ambient Temperature 35
Power Supply 240 VAC 50-60 Hz
Power Connector in Schuko Plug
DMX Connector XLR 3P In/Out, XLR 5P In/Out
DMX Connector in XLR 3P, XLR 5P
DMX Connector out XLR 3P, XLR 5P
Installation Depth (excl. connector) 126
IP Rating IP20 (indoor use only)
Housing Aluminum die-cast
• Convert the signal from MIDI to 72 CH. ANALOGUE output.
• The front panel alpha-numeric display shows the DMX start address & programming options.
• The last scene remains when DMX disappears.
• Pre-store a scene and is available for emergency.
• Memory backup with EEPROM.
• CHASE function can be selected from 1 to 72 channel & speed control.
• Select ANALOGUE output from +(-)10V, +(-)12V and +(-)15V.
• Receive NOTE ON/OFF signal of MIDI.
Technical Info
Voltage: 230V
Dimensions: 483 x 130 x 45 mm (LxWxH)
Weight: 1,65 kg |
- DMX out USB Dongle
- 512 channels
- Titan PC Suite for Windows
- 5-pin DMX Female, 1 x USB Type A
- Avolites Titan
- Bus Powered
- 30-01-9601
| The MA 2Port Node onPC allows the conversion of Ethernet data into DMX data and vice versa. In combination with grandMA2 onPC/grandMA onPC it is also possible to output DMX.
If used with grandMA2 onPC, the MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC PRO) and becomes a powerful show controller for smaller applications.
Also handy backup solutions for reduced budgets become possible. The MA 2Port Node onPC have integrated power supplies, but they also can be powered over Ethernet. Furthermore couplers and safety wires can be easily attached.
Two green LEDs will indicate if DMX traffic is in progress. Both, DMX LEDs and the display’s backlight, can be switched off remotely. The ‘Finder Functionality’ is a clever way to let the console indicate a selected node by flashing its backlight. In turn, a press of a button on the MA 2Port Node onPC will identify it on the console’s display.
All MA 2Port Nodes are fully integrated into the MA System. That means easy, comfortable configuration incl. in/out assignment of each node from any grandMA console or grandMA2 onPC/grandMA onPC. It’s also possible to use the nodes with other systems, because they speak MA-Net2, MA-Net and Art-Net, which can be set remotely.
The MA 2Port Nodes are also available as flush-mount versions (for EU and US in-wall boxes).
Dimensions 160 x 145 x 50 mm
Dimensions (inch) 6.3 x 5.7 x 1.9 inch
Net weight 1,1kg
Net weight (lbs) 2.3 lbs
PRICE WITHOUT V.A.T. 24% | Signal splitting/amplification is easier now thanks to the D6 Branch from American DJ. This DMX Splitter/Amplifier allows for the easy connection to lighting units and the transmission of signals to them. Lightweight and easy to mount, functions perfectly as a transmission hub for any permanent setup or mobile entertainment system.
Do you want to manage your DMX fixtures in a more organized fashion using an easy solution? The D6 Branch from American DJ is the solution you need. The D6 Branch Splitter/Amplifier allows you to make your fixtures easy to manage. By significantly reducing your need for DMX cables in your production you make set-up easier, reduce the risk of a plug failure or tripped over wire, while also making your whole production cleaner and less cluttered.
Though lightweight, the D6 Branch is built from high quality materials making it the ideal blend of functionality, durability and portability. This unit is perfect for any club, bar, stage or mobile show looking to reduce their need for wires, decrease set-up time, and eliminate restrictions on where controllers and fixtures can be placed in relation to one another. Modernize your light show production today, go professional with the D6 Branch DMX Splitter/Amplifier from American DJ.
- 6-Way DMX Splitter & amplifier
- 1x DMX In, 6x DMX Out & 1 DMX Thru (all 3-pin XLR’s)
- Link with other D6 Branch Splitters
- Input & outputs are electrically and optically isolated from each other
- Includes two straps to securely attach to truss
- Clamp mount bracket included
- On/Off power switch
- Multi-voltage operation: AC 100-240V, 50/60Hz (IEC Socket)
- Dimensions (LxWxH): 4.75”x5”x6” / 118.5x122.5x153mm
- Weight: 2.5 lbs/ 1 kg.
| The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).
- Type: DMX 512 protocol
- DMX Inputs: 2 (parallel)
- DMX Input Connectors: 3-pin XLR male
- DMX Thru Outputs: 2 (parallel)
- DMX Thru Output Connectors: 3-pin XLR female
- DMX Outputs: 8 (electrically isolated)
- DMX Output Connectors: 3-pin XLR female
- Controls: Power On/Off, DMX Thru Terminator
- Indicators: 8 x Power LED, 8 x Signal LED
- Power Socket: IEC power socket
- Power Supply: transformer
- Operating Voltage: 230 V AC, 50 Hz
- Power Consumption (max.): 15 W
- Dimensions (W x H x D): 483 x 44 x 160 mm
- Accessories included in package: power cord
| The Cameo W-DMX™ T2 is the successor to the W-DMX T1™ with a higher transmission range and Bluetooth connectivity for configuration. It is a member of Wireless Solution's acclaimed BlackBox series of transceivers for wireless lighting control supporting both transmit and receive modes of DMX and RDM signals in the 2.4 GHz frequency band. Built for professional applications, the roadworthy die-cast metal housing is packed with patented W-DMX™ technologies. These include Adaptive Frequency Hopping to automatically avoid interference created by other wireless networks, and Data-Safe error correction that protects DMX and RDM data from corruption.
The Cameo W-DMX™ T2 features Neutrik 3-pin and 5-pin DMX inputs and outputs, an automatically switching power supply for multi-voltage operation plus a gold-plated Phoenix connector for 12 V battery powering. The G5 transceiver is backward compatible with W-DMX™ G3, G4, G4S and G5 units. It comes with a 3 dBi single-band antenna providing an operating range up to 700 m, N-type antenna adapter and a 19" rackmount kit.
The Cameo W-DMX™ T2 is also prepared for upgradeable CRMX compatibility, making it a versatile transceiver.
CRMX upgrade license code available for 99€ upon request. Please contact our inside sales team.
Product type
LED Moving Lights
Colour spectrum
Cold white
Refresh rate
adjustable to 25000 Hz
DMX input
XLR 3-pin male, XLR 5-pin male
DMX output
XLR 3-pin female, XLR 5-pin female
DMX mode
34-channel, 50-channel
DMX Functions
Animation Wheel, Auto Movement, Colour wheel, CTO, CTO Fine, Cyan, Cyan Fine, Device Settings, Dimmer, Dimmer Fine, Focus, Focus Fine, Framing Blade Rotation, Framing Blades, Frost, Gobo Wheel 1, Gobo Wheel 2, Iris, Magenta, Magenta Fine, PAN, PAN FINE, Prism, Rotation Fine Gobo Wheel 1, Rotation Gobo Wheel, Rotation Prism, Set Dimmer Curve, strobe, TILT, TILT FINE, Yellow, Yellow Fine, Zoom, Zoom Fine
High Speed Strobe
> 20 Hz
Standalone modes
Auto Mode, Device Settings, Static
Controls
Enter, Mode, Touch screen, Value Down, Value Up
Indicators
Graphic Display, Touch-Graphic Display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Ambient temperature (operating)
-15 - 45 °C
Power connector
Neutrik powerCON IN / OUT
Housing material
ABS plastic, Metal
Cooling
Heat-pipe cooling system with temperature controlled fans
Illuminance
100,000 lx @ 3m, 39000lx @ 5m
Accessories (included)
2 x Omega Clamp, Power cord
|
Reviews
There are no reviews yet.