Content | The Showtec DMX Merge allows you to combine two DMX controllers to one DMX line or to use a second desk as back-up desk. The unit has 4 modes: 1) HTP (Highest Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX channel with the highest value has priority. 2) Back-up mode. The unit is connected to two DMX desks. Channel A has priority. Once channel A fails or has no DMX channel B takes over the show. 3) Merge mode. Two desks can be merged on one line. E.g. you can run a scene setter and DMX operator on one line. The Scene Setter will operate on channel 1-96 and the DMX Operator will have the channels 97 and higher. These positions can be freely addressed by the dip-switches. 4) LTP (Latest Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX input with the latest value change has priority.
Specifications
Voltage: 230V
Power Requirement: DC 9V, 300 mA Min.
(AC/DC adapter included)
DMX Input: two 3-pin
XLR male sockets on the front panel
Extra: two 3-pin
XLR male sockets on the rear panel
DMX output: two 3-pin
XLR female sockets on the front panel
Extra one 3-pin XLR
female sockets on the rear panel
Dimensions: 483 x 73 x 45 mm (LxWxH)
Weight: 1,15 kg | Signal splitting/amplification is easier now thanks to the D6 Branch from American DJ. This DMX Splitter/Amplifier allows for the easy connection to lighting units and the transmission of signals to them. Lightweight and easy to mount, functions perfectly as a transmission hub for any permanent setup or mobile entertainment system.
Do you want to manage your DMX fixtures in a more organized fashion using an easy solution? The D6 Branch from American DJ is the solution you need. The D6 Branch Splitter/Amplifier allows you to make your fixtures easy to manage. By significantly reducing your need for DMX cables in your production you make set-up easier, reduce the risk of a plug failure or tripped over wire, while also making your whole production cleaner and less cluttered.
Though lightweight, the D6 Branch is built from high quality materials making it the ideal blend of functionality, durability and portability. This unit is perfect for any club, bar, stage or mobile show looking to reduce their need for wires, decrease set-up time, and eliminate restrictions on where controllers and fixtures can be placed in relation to one another. Modernize your light show production today, go professional with the D6 Branch DMX Splitter/Amplifier from American DJ.
- 6-Way DMX Splitter & amplifier
- 1x DMX In, 6x DMX Out & 1 DMX Thru (all 3-pin XLR’s)
- Link with other D6 Branch Splitters
- Input & outputs are electrically and optically isolated from each other
- Includes two straps to securely attach to truss
- Clamp mount bracket included
- On/Off power switch
- Multi-voltage operation: AC 100-240V, 50/60Hz (IEC Socket)
- Dimensions (LxWxH): 4.75”x5”x6” / 118.5x122.5x153mm
- Weight: 2.5 lbs/ 1 kg.
|
- Professional 6-way DMX splitter / booster
- Chassis 1U 19" rack-mount enclosure
- 6 electrically isolated XLR (3-pin / 5-pin) outputs
- DMX status indicator per channel
- Power status indicator
- Switchable 120 Ohm terminating resistor for the DMX THRU output jack
- Front and rear rack-mount angle attachment options
The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
Product type
Other Lighting Accessories
Type
DMX splitter / booster
DMX inputs
2 (parallel)
DMX input connectors
XLR 3-pin male , XLR 5-pin male
DMX Thru Outputs
2 (parallel)
DMX Thru Output Connectors
XLR 3-pin female , XLR 5-pin female
DMX outputs
6
Controls
DMX Thru Terminator , Power On/Off
Indicators
6 x Power LED , 6 x Signal LED
Mains connector
IEC power connector
Operating voltage
transformer
Operating voltage
230 V AC, 50 Hz
Power consumption
15 W
Width
483 mm
Height
44 mm
Depth
160 mm
Weight
2,976 kg
Accessories (included)
Power cord |
MARTIN RS485/DMX Splitbox/Booster
|
NX DMX NX DMX is a USB powered 2 port DMX Node. As a member of the innovative ONYX platform from Obsidian Control Systems the NX DMX provides instant access to DMX In and Outputs as well as RDM communication. The device is plug and play and requires no drivers or additional configuration to integrate with ONYX. It is designed to work with any PC but also works with any ONYX console as a fast and affordable way to add two additional DMX ports.NX DMX supports ONYX on PC systems for up to four Universes without any dedicated license. When connected to an ONYX licensed PC or ONYX console the NX DMX is assignable to any one of 255 Universes.NX DMX allows for the full ONYX system to be used in many situations, from small events and tradeshows to clubs and churches. Many technicians utilize ONYX through the NX DMX as an affordable but powerful test station due to ONYX\' outstanding library support. CONNECTION 2x DMX / RDM Universe In/Out: 5pin locking XLR USB In: USB 2.0 B
SPECIFICATION Physical - Weight: 245g (0.6 lbs.)
- Length: 92 mm (3.7 in.)
- Width: 82 mm (3.3 in.)
- Height: 41mm (1.7 in.)
Electrical
- 5V over USB
- 100-240V nominal, 50/60 Hz
- Maximum current: 300 mA
|
The Eurolite USB-DMX 512 interface combines very small dimensions with many functions due to the internal RISC-controller. This controller creates all DMX-signals so that the pc and the USB-port is not too busy enabling the parallel use of several DMX-universes.
Eurolite USB-DMX 512 Interface features:
- USB-DMX-Interface
- Interface between notebook or pc and DMX-devices
- Tested with the following DMX lighting control software: DMX-Configurator, FreeStyler, DMXControl
- Recommended system requirements: min. Pentium 3 processor 1GHz, 128 MB RAM
- Tested operating systems: Windows XP Home, Windows XP Professional, Windows Vista, Windows7
- Power supply: 5 V DC, 500 mA via USB
- Input: USB 1.1 / USB 2.0
- DMX-output: 512 channels
- DMX-512-connection: 3-pin XLR
|
Reviews
There are no reviews yet.