SHOWTEC 50364 DJ-Switch 10 – 10 channel switchboard

98.28 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DJ-Switch 10 10 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.

 

Read more

DJ-Switch 10

10 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.

Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “SHOWTEC 50364 DJ-Switch 10 – 10 channel switchboard”

Your email address will not be published. Required fields are marked *

Quick Comparison

SHOWTEC 50364 DJ-Switch 10 - 10 channel switchboard removeEurolite Board 10-ST w/10x safety-plug removeAdam Hall 87471 19" Mains Power Distributer 8-way Sockets 1U removeWork ESD 10K Automatic Voltage Regulator removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- removeZero88 Switch 6 Schuko DMX 6 Channels Digital Switcher remove
NameSHOWTEC 50364 DJ-Switch 10 - 10 channel switchboard removeEurolite Board 10-ST w/10x safety-plug removeAdam Hall 87471 19" Mains Power Distributer 8-way Sockets 1U removeWork ESD 10K Automatic Voltage Regulator removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- removeZero88 Switch 6 Schuko DMX 6 Channels Digital Switcher remove
Imagesb-1100 eurolite power distributer 32A to 16a
SKU50364BOARD-10ST87471ESD 10KSB-1100SWITCH6SCHUK
Rating
Price 98.28 incl. GR VAT 138.00 incl. GR VAT 51.21 incl. GR VAT 814.00 incl. GR VAT 438.94 incl. GR VAT 1,245.46 incl. GR VAT
Stock

In stock

Available on backorder

Only 2 left in stock (can be backordered)

Available on backorder

Only 1 left in stock

Available on backorder

AvailabilityIn stockAvailable on backorderOnly 2 left in stock (can be backordered)Available on backorderOnly 1 left in stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

DJ-Switch 10 10 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.

Eurolite Board 10-ST w/10x safety-plug

10-fold switching panel
Fully cabled case with 10 safety-sockets
For 16 A safety-plug
10 switches with flash-buttons
10 fuseholders with 5 A

Power supply: 230 V AC, 50 Hz ~ 
Max. power output: 3680 W 
Max. current: 16 A 
Max. current/channel: 5 A 
Output sockets: 10 safety power outlets 
Fuses: F 6.3 A, 250 V 
Dimensions (LxWxH): 135 x 485 x 135 mm 
Weight: 3.3 kg

Adam Hall Cables 87471

19" Power Strip 1U 8-way with switch

Mains Distribution Unit 19"/1 U
  • Illuminated 2-pole switch on the front panel
  • 8 mains outlets on the rear panel
  • Black aluminium housing
  • 54 mm deep
  • 19 "angle can be mounted in four positions
Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
8, Rotated 45°
Power input
cables
Cable length
2 m
Cable connector
angled, Earthing contact (CEE 7/7)
Cross section
1.5 mm²
Operating voltage
250 V
Max. current
16 A
Cabinet material
Aluminium, Plastic
Color
Black
Width
485 mm
Height
44 mm
Depth
44 mm
Other features
Illuminated on / off switch, Mounting brackets can be used in 4 positions
Weight
0,73 kg

Work ESD 10K Automatic Voltage Regulator

It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.

Technical Specifications:

Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm

Eurolite SB-1100 Practical 32 A distributor in 19" housing Practical 32 A distributor in 19" housing Specially designed for larger distribution needs 3 U necessary for installation 32 A three phase current input via 1.5 meter long 5 x 6 mm?² power cable and plug 32 A three phase current output via mounted plug secured on the back panel by a fault current circuit breaker The entire distributor is secured via 30 mA fault current circuit breaker 2 mounted CEKON sockets with 16 A on the front panel, secured via 3 x 16 A fuse blocks Control lamps indicate each phase 6 safety sockets on the housing back (2 per phase) Each pair of safety sockets feature fuse protection via 16 A automatic circuit breakers With earthing screw in order to ground a rigg if necessary Power supply: 380-400 V AC, 50 Hz ~ Max. output/channel (safety socket): 3680 W Max. current/channel (safety socket): 16 A Max. output/phase: 7360 W Max. current/phase: 32 A Height: 3 U Dimensions (LxWxH): 482 x 295 x 132 mm Weight: 6.9 kg

Zero88 Switch 6 Schuko DMX 6 Channels Digital Switcher

Cost effective 19" dimmer

The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.

The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.

With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.


The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.

Features
  • 3 dimmer curves (normal, linear, switch)
  • 12 Memories
  • Preheat per channel
  • International socket options
  • 6 x 10 Amps
  • MCB per channel
  • Advanced heatsink and fan cooling
  • DMX addressing via user interface
  • 19"
  • Built in termination circuit for DMX
  • ChilliNet enabled
  • RDM hardware ready
  • Dimensions - 88mm x 483mm x 360mm
  • Weight - 8.0kg
Weight2.50 kg3.30 kg0.84 kg20.00 kg6.90 kg8.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.50 kg
Weight 3.30 kg
Weight 0.84 kg
Weight 20.00 kg
Weight 6.90 kg
Weight 8.00 kg