SHOWTEC 50663 PSA-32A6S 32A CEE In – 6 x 16A Schuko

No longer available!

585.89 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: 50663 Category:
Showtec PSA-32A6S 6x MCB, Schuko out Bring safety on stage! Power is the most important chain for a successful show on any stage. Showtec developed, together with leading rental companies, the power distributors that will keep your power and equipment save. The PSA series give you real-time voltage and amperage information during your show. Now […]

 

Read more

Showtec PSA-32A6S

6x MCB, Schuko out

Bring safety on stage! Power is the most important chain for a successful show on any stage. Showtec developed, together with leading rental companies, the power distributors that will keep your power and equipment save. The PSA series give you real-time voltage and amperage information during your show. Now you can monitor your setup and make sure that the power is correctly distributed at all times.

  • Digital voltage & amperage-monitoring per phase.
  • 16A C-type automatic fuses per output.
  • 19 inch Rackmount

Specifications

Input: 1,5m H07RN-F 5G6 cable + CEE male 3P+N+PE, 400VAC, 50/60Hz
Output: 6x Schuko 1P+N+PE, 230VAC, 50/60Hz
RCCB (1pcs)
Rating: 40A
Sensitivity: 30mA
Class: A
Poles: 3P+N
Breaking Capacity: 6KA

MCB (6pcs)
Rated Current: 16A
Tripping Curve: C-type
Poles: 1P
Breaking Capacity: 6KA

Physical
Colour: Dark Grey
Housing: Powder coated Metal
Dimensions: 483 x 135 x 245 mm
IP Rating: IP20
Operating Temp: -5 ~ 40°C
Weight: 7,70 Kg

EAN:
8717748394934

Weight 8.00 kg

Reviews

There are no reviews yet.

Be the first to review “SHOWTEC 50663 PSA-32A6S 32A CEE In – 6 x 16A Schuko”

Your email address will not be published. Required fields are marked *

Quick Comparison

SHOWTEC 50663 PSA-32A6S 32A CEE In - 6 x 16A Schuko removeWork ESD 10K Automatic Voltage Regulator removeAdam Hall 87473 19" Mains Power Strip 6 Sockets, 3 Circuits removeWork LS-12 Controller removeZero88 Switch 6 Socapex DMX 6 Channels Digital Switcher removeWORK WDP 163 3PHASE 16A RACK POWER SPLITTER remove
NameSHOWTEC 50663 PSA-32A6S 32A CEE In - 6 x 16A Schuko removeWork ESD 10K Automatic Voltage Regulator removeAdam Hall 87473 19" Mains Power Strip 6 Sockets, 3 Circuits removeWork LS-12 Controller removeZero88 Switch 6 Socapex DMX 6 Channels Digital Switcher removeWORK WDP 163 3PHASE 16A RACK POWER SPLITTER remove
Image
SKU50663ESD 10K87473LS12SWITCH6SOCAPWDP 163
Rating
Price 585.89 incl. GR VAT 814.00 incl. GR VAT 141.40 incl. GR VAT 274.04 incl. GR VAT 1,262.75 incl. GR VAT 335.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Available on backorder

In stock

AvailabilityOut of stockAvailable on backorderOnly 1 left in stock (can be backordered)In stockAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Showtec PSA-32A6S 6x MCB, Schuko out

Bring safety on stage! Power is the most important chain for a successful show on any stage. Showtec developed, together with leading rental companies, the power distributors that will keep your power and equipment save. The PSA series give you real-time voltage and amperage information during your show. Now you can monitor your setup and make sure that the power is correctly distributed at all times.

  • Digital voltage & amperage-monitoring per phase.
  • 16A C-type automatic fuses per output.
  • 19 inch Rackmount

Specifications Input: 1,5m H07RN-F 5G6 cable + CEE male 3P+N+PE, 400VAC, 50/60Hz
Output: 6x Schuko 1P+N+PE, 230VAC, 50/60Hz
RCCB (1pcs)
Rating: 40A
Sensitivity: 30mA
Class: A
Poles: 3P+N
Breaking Capacity: 6KA

MCB (6pcs)
Rated Current: 16A
Tripping Curve: C-type
Poles: 1P
Breaking Capacity: 6KA

Physical
Colour: Dark Grey
Housing: Powder coated Metal
Dimensions: 483 x 135 x 245 mm
IP Rating: IP20
Operating Temp: -5 ~ 40°C
Weight: 7,70 Kg EAN: 8717748394934

Work ESD 10K Automatic Voltage Regulator

It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.

Technical Specifications:

Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm

19" Power Strip 1 U with 3 separate Power Circuits
  • Safety outlets each with 16 A / 250 V
  • Outlets of power circuit one are ruby red
  • Power circuit two is light grey and three is black
  • 2-m cable with red CEE plug 16 A pro phase / 400 V
  • cable on the side
  • 19" brackets can be mounted in for different positions
Product type 19" rack mains socket strips
Type 19" / 1 U
Number of outlets (Earthing contact / IEC 7/4) 6 (3 x 2) , Rotated 45°
Power input cables
Cable length 2 m
Cable connector 16 A CEE plug 400 V
Cross section 5 x 1.5 mm²
Operating voltage 400 V
Max. current 3 x 16 A
Cabinet material Aluminium
Colour Black
Width 485 mm
Height 44 mm
Depth 44 mm
Other features 3 phases colour-coded (red, grey, black) , Mounting brackets can be used in 4 positions
Weight 1,12 kg

Work LS-12 Controller

12 switches panel (0-10 V.) adaptable to model LP-12 S
Dimensions: 483 x 44 x 16 mm. Weight: 1,2 kgs.

Zero88 Switch 6 Socapex DMX 6 Channels Digital Switcher

Cost effective 19" dimmer

The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.

The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.

With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.


The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.

Features
  • 3 dimmer curves (normal, linear, switch)
  • 12 Memories
  • Preheat per channel
  • International socket options
  • 6 x 10 Amps
  • MCB per channel
  • Advanced heatsink and fan cooling
  • DMX addressing via user interface
  • 19"
  • Built in termination circuit for DMX
  • ChilliNet enabled
  • RDM hardware ready
  • Dimensions - 88mm x 483mm x 360mm
  • Weight - 8.0kg

This is a 16 A three-phase power splitter with 1 PCE 3x 16A/400V input and 6 Schuko 16A output.
Each phase output(2 Schuko, 16A) is protected by a 16A circuit breaker and can be read out by a
4-digit voltmeter as well as 4-digit ammeter. Additionally, a protected Schuko is provided for plugging
in power.

Weight8.00 kg20.00 kg0.60 kg1.20 kg8.00 kg3.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 8.00 kg
Weight 20.00 kg
Weight 0.60 kg
Weight 1.20 kg
Weight 8.00 kg
Weight 3.80 kg