| Content |
Showtec PSA-32A6S
6x MCB, Schuko out
Bring safety on stage! Power is the most important chain for a successful show on any stage. Showtec developed, together with leading rental companies, the power distributors that will keep your power and equipment save. The PSA series give you real-time voltage and amperage information during your show. Now you can monitor your setup and make sure that the power is correctly distributed at all times.
- Digital voltage & amperage-monitoring per phase.
- 16A C-type automatic fuses per output.
- 19 inch Rackmount
Specifications
Input: 1,5m H07RN-F 5G6 cable + CEE male 3P+N+PE, 400VAC, 50/60Hz
Output: 6x Schuko 1P+N+PE, 230VAC, 50/60Hz
RCCB (1pcs)
Rating: 40A
Sensitivity: 30mA
Class: A
Poles: 3P+N
Breaking Capacity: 6KA
MCB (6pcs)
Rated Current: 16A
Tripping Curve: C-type
Poles: 1P
Breaking Capacity: 6KA
Physical
Colour: Dark Grey
Housing: Powder coated Metal
Dimensions: 483 x 135 x 245 mm
IP Rating: IP20
Operating Temp: -5 ~ 40°C
Weight: 7,70 Kg
EAN:
8717748394934
| 1 schucko cable input 6 schucko outputs |
1 Multiconnector input 8 CEE outputs |
This is a 32 A three-phase power splitter with 3x 32A/400V input and 6 Schuko 16A/250V output.
Each Schuko is protected by a 16A circuit breaker and each phase can be read out by a 4-digit
voltmeter as well as 4-digit ammeter. Furthermore, a residual current circuit breacker is used for
protection against electronic shock under fault conditions. Also, a CEE-socket is provided for plugging
in power.
| POWER SPLITTER
- Box connection phase separetor.
- Power Input: 380 V with connector CEE 3x16A (P+N+E).
- 6 schuko output with phase indicator.
- Dimensions: 220 x 150 x 102 mm.
- Weight: 1,8 kg. |
Work ESD 10K Automatic Voltage Regulator
It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.
Technical Specifications:
Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm
|
Reviews
There are no reviews yet.