Content |
Showtec PSA-32A6S
6x MCB, Schuko out
Bring safety on stage! Power is the most important chain for a successful show on any stage. Showtec developed, together with leading rental companies, the power distributors that will keep your power and equipment save. The PSA series give you real-time voltage and amperage information during your show. Now you can monitor your setup and make sure that the power is correctly distributed at all times.
- Digital voltage & amperage-monitoring per phase.
- 16A C-type automatic fuses per output.
- 19 inch Rackmount
Specifications
Input: 1,5m H07RN-F 5G6 cable + CEE male 3P+N+PE, 400VAC, 50/60Hz Output: 6x Schuko 1P+N+PE, 230VAC, 50/60Hz RCCB (1pcs) Rating: 40A Sensitivity: 30mA Class: A Poles: 3P+N Breaking Capacity: 6KA MCB (6pcs) Rated Current: 16A Tripping Curve: C-type Poles: 1P Breaking Capacity: 6KA Physical Colour: Dark Grey Housing: Powder coated Metal Dimensions: 483 x 135 x 245 mm IP Rating: IP20 Operating Temp: -5 ~ 40°C Weight: 7,70 Kg
EAN:
8717748394934
|
Work ESD 10K Automatic Voltage Regulator
It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.
Technical Specifications:
Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm
|
DJ-Switch 10
10 channel switchboard. Schuko outlets on backside 5 A per channel. 15 A total load. Fuses on frontpanel.
|
This is a 16 A three-phase power splitter with 1 PCE 3x 16A/400V input and 6 Schuko 16A output.
Each phase output(2 Schuko, 16A) is protected by a 16A circuit breaker and can be read out by a
4-digit voltmeter as well as 4-digit ammeter. Additionally, a protected Schuko is provided for plugging
in power.
| POWER SPLITTER
- Box connection phase separetor.
- Power Input: 380 V with connector CEE 3x16A (P+N+E).
- 6 schuko output with phase indicator.
- Dimensions: 220 x 150 x 102 mm.
- Weight: 1,8 kg. |
This is a 63A three-phase power splitter with 3x 63A/400V input and 4 CEE 3x 32A/400V output.
Each output is protected by a 32A multi9 circuit breaker and each phase can be read out by a
4-digit voltimeter as well as 4-digit ammeter. Furthermore, a residual current circuit breacker is
used for protection against electronic shock under fault conditions. |
Reviews
There are no reviews yet.