Content | • DMX splitter for 8 outputs
• Electrical isolation between in and output
• DMX Indication LEDs on in-& outputs
• 3P XLR outputs
• M10 nut at backside for truss clamps
The DB models from Showtec are universal DMX-512 optical splitters. They are designed to distribute the incoming DMX signal, in daisy chain configurations, into multiple separate outputs with an additional –Tru" port. They can be mounted in any 19" rack or into the truss by the M10 nut on the rear end of the unit. It has clear LEDs to show the DMX signal status of each output and input. There are two models available, DB-1-4 with 4 outputs and 3 & 5 Pole XLR connectors and the DB-1-8 which has 8 outputs with 3P XLR connectors.
Specifications Input connectors: 3&5 Pole XLR M
Output connectors: 3 Pole XLR F
Power input: 230VAC, 50/60Hz
Dimensions: 483 x 134 x 46 mm (LxWxH)
Weight: 2,6 kg |
- Professional 6-way DMX splitter / booster
- Chassis 1U 19" rack-mount enclosure
- 6 electrically isolated XLR (3-pin / 5-pin) outputs
- DMX status indicator per channel
- Power status indicator
- Switchable 120 Ohm terminating resistor for the DMX THRU output jack
- Front and rear rack-mount angle attachment options
The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
Product type
Other Lighting Accessories
Type
DMX splitter / booster
DMX inputs
2 (parallel)
DMX input connectors
XLR 3-pin male , XLR 5-pin male
DMX Thru Outputs
2 (parallel)
DMX Thru Output Connectors
XLR 3-pin female , XLR 5-pin female
DMX outputs
6
Controls
DMX Thru Terminator , Power On/Off
Indicators
6 x Power LED , 6 x Signal LED
Mains connector
IEC power connector
Operating voltage
transformer
Operating voltage
230 V AC, 50 Hz
Power consumption
15 W
Width
483 mm
Height
44 mm
Depth
160 mm
Weight
2,976 kg
Accessories (included)
Power cord |
-
Product Features:
This DMX512 encoder options the advanced micro control unit, It can receive the DMX512 standard digital control signal which is internationally widely used It changes the signal into PWM control signal to actuate the LED lamp It can also connect the DMA digital console to change the light or each dynamic effect In addition, when the decoder is not connected with the DMA console, it can be used as a synchronous controller That is to say you can Synchronously control number of decoders and LED lights
Basic parameters:
Basic parameters
Product Name: DMX512 Decoder
Supply voltage: DC12-24V
Output channels: 3 channels (R, G, B, ) or 4 channels (R, G, B, W )
Output current: Max.8A Per Channel
Output Power 1:12V:<288W, 24V:<576W (3 channels)
Output Power 2:12V:<384W, 24V:<768W (4 channels)
Operating temperature: -20-60C
Controller size: L166*W67*H41(mm)
Box size: L176*W84*H50(mm)
Net weight: 360g
Gross weight: 408g
DMX512 standard: DMX512/1990
Control mode: button control, 512 console control
Accessories: A pair of XLR plugs
Package List:
1 * DMX Decoder
1 * Male and female XLR connectors
1 * User manual
|
- Suitable for a variety of DMX software applications
- Fully supported by FreeStyler, DMXControl and PC_DIMMER
- Output of up to 512 DMX channels
- Stable DMX output thanks to integrated processor
- Compatible with Windows 7, 8 and 10, Mac OS X and Linux
- Connections: 3-Pin XLR connector (Neutrik), USB 2.0/ 1.1 B
- DMX output galvanically isolated against voltage damage
- Sturdy metal housing
- Power supply via USB
- Power supply: 5 V DC via USB
- Dimensions (L x W x H): 80 x 42 x 50 mm
- Weight: 350 g
- Incl. USB cable A/ B
- Made in Germany
|
- For distribution of RDM and DMX signals on stage
- Within a rig or for fixed installations
- Robust metal housing with mounting rail with M10 thread on the top side
- Compact and lightweight design ideal for mounting on trusses
- DMX input and Thru: XLR 3-pin
- 6 DMX outputs: XLR 3-pin
- Power input: Power Twist
- Power supply: 100 - 240 V ~ 50 / 60 Hz
- Power consumption: 5 watts
- Dimensions: 122 x 126 x 254 mm
- Weight: 1.6 kg
|
- DMX out USB Dongle
- 512 channels
- Titan PC Suite for Windows
- 5-pin DMX Female, 1 x USB Type A
- Avolites Titan
- Bus Powered
- 30-01-9601
|
Reviews
There are no reviews yet.