| Content | • DMX splitter for 8 outputs
• Electrical isolation between in and output
• DMX Indication LEDs on in-& outputs
• 3P XLR outputs
• M10 nut at backside for truss clamps
The DB models from Showtec are universal DMX-512 optical splitters. They are designed to distribute the incoming DMX signal, in daisy chain configurations, into multiple separate outputs with an additional –Tru" port. They can be mounted in any 19" rack or into the truss by the M10 nut on the rear end of the unit. It has clear LEDs to show the DMX signal status of each output and input. There are two models available, DB-1-4 with 4 outputs and 3 & 5 Pole XLR connectors and the DB-1-8 which has 8 outputs with 3P XLR connectors.
Specifications Input connectors: 3&5 Pole XLR M
Output connectors: 3 Pole XLR F
Power input: 230VAC, 50/60Hz
Dimensions: 483 x 134 x 46 mm (LxWxH)
Weight: 2,6 kg | ARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512 2.4 GHz
DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way.
No time delay when signal data is transmitting, signal data is real time and reliably.
This product adopts a 2.4G ISM frequency section.
2.4G wireless DMX512 R/T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting power rate: 20dBm
DMX connector: 3pin male, 3pin female
Communication distance: 400M ( visible distance )
Work frequency section: 2.4G ISM, 126 channels.frequency section
Material: zinc alloy + plastic
Item size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc )
Package list:
2 * DMX Wireless Transmitter/Receiver unit
2 * Power Adapter
1 * Specification ( English ) | The MA 2Port Node onPC allows the conversion of Ethernet data into DMX data and vice versa. In combination with grandMA2 onPC/grandMA onPC it is also possible to output DMX.
If used with grandMA2 onPC, the MA 2Port Node onPC outputs also 512 parameters of DMX (1,024 parameters as MA 2Port Node onPC PRO) and becomes a powerful show controller for smaller applications.
Also handy backup solutions for reduced budgets become possible. The MA 2Port Node onPC have integrated power supplies, but they also can be powered over Ethernet. Furthermore couplers and safety wires can be easily attached.
Two green LEDs will indicate if DMX traffic is in progress. Both, DMX LEDs and the display’s backlight, can be switched off remotely. The ‘Finder Functionality’ is a clever way to let the console indicate a selected node by flashing its backlight. In turn, a press of a button on the MA 2Port Node onPC will identify it on the console’s display.
All MA 2Port Nodes are fully integrated into the MA System. That means easy, comfortable configuration incl. in/out assignment of each node from any grandMA console or grandMA2 onPC/grandMA onPC. It’s also possible to use the nodes with other systems, because they speak MA-Net2, MA-Net and Art-Net, which can be set remotely.
The MA 2Port Nodes are also available as flush-mount versions (for EU and US in-wall boxes).
Dimensions 160 x 145 x 50 mm
Dimensions (inch) 6.3 x 5.7 x 1.9 inch
Net weight 1,1kg
Net weight (lbs) 2.3 lbs
PRICE WITHOUT V.A.T. 24% |
- DMX wireless transmitter in miniature format for the wireless transmission of up to 512 DMX channels
- User friendly 3-pin XLR (male) connector with swivel antenna
- Wireless DMX eliminates the need for complex cabling between DMX controllers and DMX-controlled devices in lighting setups
- Due to GFSK modulation with 78 channels, interference-free operation is also possible alongside other QuickDMX receivers and wireless devices in the 2.4 GHz band (e.g. WLAN and Bluetooth)
- Operating range of up to 400 m
- From one up to 512 QuickDMX receivers can be operated per transmitter
- A maximum of 6 transmitters can be operated simultaneously, giving a total of 3072 DMX channels that can be controlled
- Plug & Play: Quick and easy setup with one operating button for connecting / disconnecting QuickDMX receivers
- LED function display
- Powered via included power supply
Technical specifications:
- 2.4 GHz ISM Band - No license is required and no charges are incurred when used anywhere in the world
- Power supply: 100 - 240 V AC, 50 / 60 Hz via included power supply
- Wireless transmission in the 2.4 GHz band (ISM)
- 78 Channels
- Modulation: GFSK
- Operating range: 400 m (with line-of-sight)
- DMX connector: 3-Pin XLR
- DMX channels: 1 Universe (512 channels)
- Dimensions with antenna (L x W x H): 212 x 18 x 18 mm
- Weight: 80 g
| Standalone DMX Controller
- No computer required
- Compatible with any DMX device
- Up to 4 DMX universes (2048 channels, add-on required for U3+4)
- Up to 680 fixtures and beams
- Up to 50 fixture types
- Up to 5000 fixture properties (colour/gobo etc...)
- 8 Fixture groups
- 6 Projects
- 15000+ available fixtures (3500+ on the controller)
- DMX address
- Fixture order and group settings
- Use as DMX splitter with DMX universe mapping
- Colour FX module with 8 effect types and 16 definable colours
- Move FX module with 8 effect types
- Beam FX module with 8 effect types
- 6 Flash buttons for controlling Special FX, Strobe, Blinder, Speed, Blackout and Smoke
- Static colour palette with 10 user-defined colours per group and gradient control
- Static position palette with 5 user-defined positions per group with fade and fanning
- Gobo palette with 5 user-definable gobos per group
- 20 Nameable live edit buttons with flash trigger mode and 'park' function
- 100 Nameable presets for storing snapshots with hold and fade timings
- Preset playback cue list - all presets or per page of 20 presets
- Group and master dimming with encoder acceleration
- Group FLASH
- FULL and Blackout
- 16-Bit pan/tilt control:multi-beam LED bar control
- FX music pulse synchronisation from microphone or line-in
- FX BPM sync with Ableton Link
- OS2L or BPM Tap effect speed
- Phase, sequence, size, fade, fan and flick
- Live control of Move FX registration point
- Global FX speed and freeze control
- Map DMX IN with group dimmer and patch to output channels (add-on required)
- WLINK sync with another Wolfmix controller (add-on required)
- Fixture Builder
- Fixture calibration tool to limit the range of moving fixtures
- X-Y touch controlled positioning grid
- RGBW touch controlled colour picker
- 8-Step real-time sequencer to create beam and move FX
- Live view of DMX levels with override of default values and DMX channel tester
- Beam editor for overriding min and max values for created effects
- Calibration and RGB, white, amber, UV mixing with automatic translation of fixed colour wheel
- Automatic matching of similar gobos across different fixture types
- Time-controlled triggering of flash and preset buttons
- Fixture FLIP function for beam order reversal
- Fixture SPLIT function for splitting multi-FX bars
- Project and fixture backup with the WTOOLS app
- Offline 3D visualisation with Easy View & WTOOLS via USB (add-on required)
- Automatic restoration of the active project (no manual saving necessary)
- Import different fixture setups into the same project
Technical data:
- Housing: ABS plastic
- Powder-coated steel base plate with 100mm VESA
- Powder-coated, steel-reinforced back plate
- Screen: 4.3" colour TFT with tinted glass
- Capacitive touch
- Hardware: 220 Mhz CPU with ARM core, 8 MB RAM, 16 MB Flash
- Audio: Omnidirectional electret microphone
- 3.5 mm Jack line-in
- DMX: 2 x 3pin DMX OUT XLR connectors
- 1 x 5pin DMX OUT XLR connector
- 1 x 5pin DMX IN/OUT XLR connector with WLINK
- USB-B connector - 900ma required (USB3 rating)
- Dimensions (W x D x H): 195 x 220 x 62 mm
- Weight: 1070 g
|
- Battery-powered WiFi to W-DMX™ converter
- Allows wireless lighting control via the Cameo iDMX® Controller App
- Receives WiFi signals from all iOS and Android devices
- 2.4 GHz W-DMX™ transmitter with an operating range of up to 300 m
- Can be used purely as a W-DMX™ transmitter via the DMX input
- Allows control of conventional DMX devices using the iDMX® Controller App via the DMX output
- Long-life LG Chem lithium-ion battery for reliable operation
- Battery management system prevents overcharging and deep discharging
- Includes power adapter charger, bag and DMX cable
Wireless lighting control at your fingertips using iOS and Android devices with the iDMX® CORE WiFi and W-DMX™ Box. The battery-powered unit is specially designed to work with Cameo\'s iDMX® Controller App. It features a 2.4 GHz W-DMX™ transmitter with an operating range of up to 300 m. 3 and 5-pin DMX inputs and outputs allow use with DMX light desks as well as wireless control of conventional DMX spots via W-DMX™ (the Wi-Fi connection is only between the mobile device and iDMX CORE). The high-capacity LG Chem lithium-ion battery provides up to eight hours of continuous operation for the iDMX® CORE Box, which can be extended by means of external power banks. An integrated battery management system prevents overcharging and deep discharging to ensure long battery life. A power adapter charger, DMX Y cable and bag are included.
Product type
LED PAR Lighting Accessories
Range of W-DMX™
up to 300 m
Range of WiFi
up to 15 m
Radio frequency
2400 MHz
DMX input
3-pin & 5-pin
Controls
On / Off , reset
Indicators
Status LED
Battery capacity
24 Wh
Charging time
6h
Battery operation time at maximum load
up to 8 hours
Housing material
Aluminium
Cabinet colour
Black
Protection class IP
20
Cooling
Convection
Maximum Ambient Temperature
-10° - 45° °C
Dimensions without mounting bracket
Width
85 mm
Height
25 mm
Length
170.5 mm
Weight
0,939 kg |
Reviews
There are no reviews yet.