| Content |
• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• 2 Auto & Sound shows, 86 built-in patterns
• Runs pre-programmed shows from SD card
• 1G SD card included
• Same personality as B300
The Galactic G300 is a single 532nm green color laser. Green is the most impressive color for laser shows and because of the 300mW laser module this unit makes powerful beam shows. If you like to create a more impressive show you can combine the G300 with the Showtec B1000 (51331). Both units have the same functionality and personality which makes programming together very easy. It also has built-in laser shows and together with the master-slave function you can run an impressive laser show without any preparation. The Galactic B300 can be controlled by DMX or programmed with any laser software using the ILDA protocol. For rental solutions you can use the SD card slot to run pre-programmed shows without controller.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 38 Watt
Laser Color: Green 532nm
Laser Power: 300mW
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-40˚
Control Modes: 2xAuto, 2xSound,
Master/Slave, DMX,
ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D
25 Pole
Safety Features: Key switch, Interlock,
Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2,
2007-03
Dimensions: 385 x 310 x 162 mm
(excl. bracket)
Weight: 8 kg
Accessories: 2 Keys, Interlock test
connector, 1G SD card
|
- Animation laser with high speed 5 Kpps stepper motor
- 60° scan angle
- Precision beams with minimum divergence
- 32 pattern presets
- DMX, sound and infrared control plus auto function
- Master, slave and standalone modes
- Display with 4 function keys for easy manual operation
- Rugged aluminium enclosure with key switch
- Includes handheld infrared remote
Projecting animations with red, green and blue color mixes the WOOKIE 400 RGB delivers an output of 400 mW from 3 mm beam diameter diode and DPSS lasers with no more than 2 mrad divergence.
The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.
Wavelength
447 nm , 532 nm , 650 nm
Beam Data
approx. 3 mm / 2 mrad divergence
Laser sources
DPSS , Laser diode
Scanner
High speed stepper motors, 5 kpps
Operating modes
Auto programs , DMX 512 protocol , sound control
DMX output
XLR 3-pin female
DMX mode
3-channel , 9-channel
Controls
Enter , Mode , Value Down , Value Up
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power connector
IEC power connector male
Weight
2 kg
|
Description - A compact but very effective 40mW green class 3B laser.
- Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ, …
- Several working modes:
- DMX-control: 1channel for easy operation or 8 channels for full control.
- Standalone: sound activated (internal mic) or automatic.
- IR-remote: infrared remote control.
- Master/slave: wonderful synchronized shows.
- Built-in microphone
- 3-digit LED display for easy menu navigation
- Key actuated on/off switch and emergency switch (interlock) input for additional safety
- Complies to EN/IEC 60825-1 2007 for Laser Safety
Technical Information - Mains Input: AC 100~240V, 50/60Hz
- Fuse: 250V 1A slow blow (20mm glass)
- Total Power consumption: 12W
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 8 channels
- DMX starting address: 001 à 505
- Laser Power: 40mW Green CW laser (λ = 532nm)
- Laser radiation class: 3B
- Beam diameter @ aperture: less than 5mm
- Divergence (each beam): less than 2 mrad
- Divergence (total output): less than 90°
- Working temperature: 10°C to 40°C
- Laser Safety Standard: EN/IEC 60825-1 2007
- Size: 145x160x80mm
- Weight: 1.3kg
|
Description - Produces 2 synchronized laser beams
- Generates dynamic 3 color laser shows, perfect for fixed and mobile installations.
- RGY (Red, Green, Yellow) Class 3B Laser
- o 650nm Red 150mW beam
- o 532nm Green 150mW beam
- o Mixed Yellow 300mW beam
- The color of the beams changes all the time using laser blanking technology.
- Several working modes:
- o DMX controlled, 1 or 9 channels
- o Stand-alone with built-in microphone
- o Stand-alone automatic mode
- Preprogrammed multi-color laser shows
- DMX-addressing with LED display
- Complies to EN/IEC 60825-1 for Laser Safety
Technical Information - Mains Input: AC 230V, 50Hz
- Fuse: 250V 1.5A slow blow (20mm glass)
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 9 channels
- DMX starting address: 001 à 255
- Laser Power: 150mW Green CW laser (λ = 532nm)
150mW Red CW laser (λ = 650nm) - Laser radiation class: 3B
- Laser Safety Standard: EN60825-1:1994 + A1:2002 + A2:2002
- Size: 26 x 30x 10cm
- Weight: 3,61kg
|
Name:Pure diode RGB5000 laser light
Laser power:5000mW
Color Blance:
Red>1000mw/638nm (
Green>1200mW/520nm OEM ( 3000mw/445 OEM ( |
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
|
Reviews
There are no reviews yet.