Z-1 Remote Control for Z-800
€39.56 incl. GR VAT
Available on backorder
EAN: N/A
Z-1 Remote Control for Z-800
Weight | 0.20 kg |
---|
SHOWTEC 60695 Z-1 Remote Control for Z-800 remove | ST electronics L6219 DIP-24 STEPPER MOTOR DRIVER remove | STARAY Extension Cable DMX, IP65 3 meters remove | MARTIN DETONATOR Remote Control - Strobe remove | ARTEX AX60S Full Body Harness with SK 12-Y SET remove | MARTIN Atomic MPU-02 External Power Supply remove | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | SHOWTEC 60695 Z-1 Remote Control for Z-800 remove | ST electronics L6219 DIP-24 STEPPER MOTOR DRIVER remove | STARAY Extension Cable DMX, IP65 3 meters remove | MARTIN DETONATOR Remote Control - Strobe remove | ARTEX AX60S Full Body Harness with SK 12-Y SET remove | MARTIN Atomic MPU-02 External Power Supply remove | ||||||||||||
Image | ||||||||||||||||||
SKU | 60695 | L6219 | EXT. IP65 DMX CABLE 3M | Detonator | AX60S-PLEYSBEL | MPU-02 | ||||||||||||
Rating | ||||||||||||||||||
Price | €39.56 incl. GR VAT | €6.04 incl. GR VAT | €9.50 incl. GR VAT | €141.86 incl. GR VAT | €170.00 incl. GR VAT | €257.92 incl. GR VAT | ||||||||||||
Stock | Available on backorder | In stock | Only 4 left in stock | Only 1 left in stock (can be backordered) | Only 2 left in stock | Available on backorder | ||||||||||||
Availability | Available on backorder | In stock | Only 4 left in stock | Only 1 left in stock (can be backordered) | Only 2 left in stock | Available on backorder | ||||||||||||
Add to cart | ||||||||||||||||||
Description | ||||||||||||||||||
Content |
Z-1 Remote Control for Z-800 |
FULL-BRIDGE PWM MOTOR DRIVER The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors. The L6219 with a few external components form a complete control and drive circuit for LS-TTL or microprocessor controlled stepper motor system. The power stage is a dual full bridge capable of sustaining 46V and including four diodes for current recirculation. A cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction. An internal pulse-width-modulation (PWM) controls the output current to 750 mA with peak startup current up to 1 A. Wide range of current control from 750 mA (each bridge) is permitted by means of two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.
*ABLE TO DRIVE BOTH WINDINGS OF BIPOLAR STEPER MOTOR *OUTPUT CURRENT UP TO 750mA EACH WINDING *WIDE VOLTAGE RANGE 10V TO 46V *HALF-STEP, FULL-STEP AND MICROSTEPPING MODE *BUILT-IN PROTECTION DIODES *INTERNAL PWM CURRENT CONTROL *LOW OUTPUT SATURA TION VOLTAGE *DESIGNED FOR UNSTABILIZED MOTOR SUPPLY VOLTAGE *INTERNAL THERMAL SHUTDOWN
STEPPER MOTOR DRIVER, 6219, DIP24; Motor Type:Stepper; No. of Outputs:4; Output Current:1A; Driver Case Style:DIP; No. of Pins:24; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Base Number:6219; Device Type:Motor; IC Generic Number:6219; IC Temperature Range:Commercial; Logic Function Number:6219; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Output Current Max:0.75A; Package / Case:DIP; Supply Voltage Max:46V; Supply Voltage Min:10V; Termination Type:Through Hole Key Features
|
Info Extension Cable DMX, IP65, 3 meters, with XLR 3 pin, male and female. |
The Detonator is an optional, dedicated remote control tool for easy command of the Atomic strobe's flash rate and intensity. It includes "blinder effect” and "single flash” detonator buttons as well as a chase/synchronization toggle switch. Easy to set up and operate, the Atomic Detonator requires no external power source. | The Artex harness AX60 S ( Article 1062) in accordance with EN 361 / EN 358 has length adjustable shoulder , leg straps and is equipped with a back header plate m . Anchorage in the shoulder area , 2 catch loops in the chest area and a wide, padded backrest equipped . The safety harness AX 60 S is available in this variant with fall arrest on tether . The Auffangurt AX 60 S is suitable for collecting , abseiling , holding , climbing and rescue . SK 12-Y Verbindungsmittel mit Bandfalldämpfer Der Artex Auffanggurt AX60 S (Artikel 1062) nach EN 361 / EN 358 hat längeneinstellbare Schulter-, Beingurte und ist mit einer Rückenverteilerplatte m. Auffangöse im Schulterbereich, 2 Auffangschlaufen im Brustbereich und einer breiten, gepolsterten Rückenstütze ausgestattet. Den Auffanggurt AX 60 S gibt es in dieser Variante mit Steigschutzöse am Haltegurt. Der Auffangurt AX 60 S eignet sich zum Auffangen, Abseilen, Halten, Steigen und Retten. Artikeldetails Rückenverteilerplatte m. Auffangöse im Schulterbereich Gurtverschluss im Brustbereich vordere Auffangschlaufen i. Brustbereich Schulter- und Beingurte längeneinstellbar Durchsteckverschluss (Schnellverschluss) an den Beingurten u. Haltegurt Haltegurt / Leibgurt m. seitl. Halteösen breite, gepolsterte Rückenstütze Steigschutzöse am Haltegurt Sitzgurt Gewicht: 1,6kg Farbe: orange / blau |
Power supply for Atomic Strobe or Colourchanger. | ||||||||||||
Weight | 0.20 kg | 0.02 kg | 0.90 kg | 1.00 kg | 2.00 kg | 0.40 kg | ||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||
Additional information |
|
|
|
|
|
|
Reviews
There are no reviews yet.