SHOWTEC 60698 Z-9 Wireles Remote Control

• 4-way power strip with plastic housing
• Sockets are 45° rotated /Ability to connect corner plugs
• Surge protection / child protection
• Voltage: 230V
• Maximum load: 3500W/16A
• 2 USB ports 5.0V/2.1A
• Degree of protection: IP20
• Light switch On/Off to save energy
• Cable length: 1.5m
• Cable type: H05VV-F 3G1.5mm²
• Dimensions (HxWxD): 34x6x5 cm
• Colour: Black

The Atomic 3000 DMX is a powerful and rugged, 3000 W high-impact strobe.

    * 3000 W long-life Xenon lamp included
    * 5600 K color temperature
    * Continuous blinder effect with auto fade
    * Quiet temperature-controlled fan cooling
    * Smart integrated heat control eliminates cool down time
    * Atomic Detonator remote control, socket kit for lamp change
    * Auto-ranging power supply (100-240 V, 50/60 Hz)
    * DMX, stand-alone, master/slave or Detonator remote control
    * Preprogrammed special effects
 

• Length: 425 mm (16.7 in.) without bracket

• Width: 245 mm (9.6 in.) without bracket

• Height: 240 mm (9.4 in.) without bracket

• Weight: 7.5 kg (16.5 lbs.) without bracket
  

• Effects Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply) 

• Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply)

• Strobe intensity: Blackout - maximum

• Blinder effect: Continuous with auto fade

• Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash

• Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1

• Stand-alone control: Via N.O. or N.C. SPST switch

• Stand-alone options: Selectable flash rate or blinder effect

• Setting and addressing: DIP switch

• DMX channels: 1, 3, and 4 channel modes

• Receiver: RS-485

• DMX compliance: USITT DMX512/1990
  

• Type: Xenon discharge

• Approved lamps: MAX-15 Xenon (200-240 V power), MAX-7 Xenon (100-120 V power)

• Housing: Steel

• Color: Black

• Finish: Electrostatic powder-coated

• Minimum clearance around fan and air vents: 0.1 m (0.4 ft.)

• Mounting points: Five 12 mm (0.5 in.) holes in mounting bracket

• Orientation: Any

• Minimum distance to combustible materials: 0.5 m (1.7 ft.)

• Minimum distance to illuminated surfaces: 1 m (3.3 ft.)

• Power connection: 1.5 m (4.9 ft.) cable tail, 14 AWG

• DMX data in/out: 3-pin and 5-pin XLR sockets

• AC power (MAX-7 model): 100-120 V nominal, 50/60

• Hz AC power (MAX-15 model): 200-240 V nominal, 50/60

• Hz Power supply unit: Auto-ranging electronic switch-mode

• Typical current consumption (MAX-15, high power mode): 8 A

• Peak current consumption: 33 A

• Main fuse (all AC power voltages): 20 AT (slow blow), 250 V

• AC mains power cable: 14 AWG or 2.5mm2

• Maximum ambient temperature (Ta max.): 40° C (104° F)

• Minimum ambient temperature (Ta min.): 5° C (41° F)

• Maximum lamp socket temperature: 120° C (248° F)

• Items MAX-15 Xenon lamp (installed, EU model): P/N 97010307

• MAX-7 Xenon lamp (installed, US model): P/N 97010308

• User manual: P/N 35000094

• 6-way power strip with plastic housing
• Sockets are 45° rotated
• Surge protection
• With illuminated 2-pole rocker switch
• Colour: white

The Detonator is an optional, dedicated remote control tool for easy command of the Atomic strobe's flash rate and intensity. It includes "blinder effect” and "single flash” detonator buttons as well as a chase/synchronization toggle switch. Easy to set up and operate, the Atomic Detonator requires no external power source.


    * Dedicated remote control for Atomic strobe series
    * Fader-controlled flash rate and intensity
    * Single button for Detonator blinder effect
    * Separate button for single flash and flash sync
    * Chase effect operation with multiple units
    * No external power necessary
    * Easy set-up and operation