SHOWTEC 60700 Z-10 Remote

Z-10 Remote

The Stage Cyclo is an RGB, fluorescent color-changing luminaire that provides soft, even illumination for stage applications. Simple to use, powerfully bright and absolutely noiseless, the Stage Cyclo is also ideal for TV studio and theater sets.

    * High output 54 W T5 fluorescent tubes in red, green, blue and white
    * Long lamp life (20 000 hrs)
    * RGB + W color mixing
    * 0-100% intensity control
    * High optical performance: uniform distribution of light and color
    * Silent operation
    * Versatile mounting options
    * Tough construction, easy to handle
    * Choice of frost lenses and barndoor accessories
    * 3 and 5 pin XLR and RJ45 sockets

Info

Extension Cable DMX, IP65, 3 meters, with XLR 3 pin, male and female.

The Detonator is an optional, dedicated remote control tool for easy command of the Atomic strobe's flash rate and intensity. It includes "blinder effect” and "single flash” detonator buttons as well as a chase/synchronization toggle switch. Easy to set up and operate, the Atomic Detonator requires no external power source.


    * Dedicated remote control for Atomic strobe series
    * Fader-controlled flash rate and intensity
    * Single button for Detonator blinder effect
    * Separate button for single flash and flash sync
    * Chase effect operation with multiple units
    * No external power necessary
    * Easy set-up and operation

 

The Atomic 3000 DMX is a powerful and rugged, 3000 W high-impact strobe.

    * 3000 W long-life Xenon lamp included
    * 5600 K color temperature
    * Continuous blinder effect with auto fade
    * Quiet temperature-controlled fan cooling
    * Smart integrated heat control eliminates cool down time
    * Atomic Detonator remote control, socket kit for lamp change
    * Auto-ranging power supply (100-240 V, 50/60 Hz)
    * DMX, stand-alone, master/slave or Detonator remote control
    * Preprogrammed special effects
 

• Length: 425 mm (16.7 in.) without bracket

• Width: 245 mm (9.6 in.) without bracket

• Height: 240 mm (9.4 in.) without bracket

• Weight: 7.5 kg (16.5 lbs.) without bracket
  

• Effects Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply) 

• Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply)

• Strobe intensity: Blackout - maximum

• Blinder effect: Continuous with auto fade

• Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash

• Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1

• Stand-alone control: Via N.O. or N.C. SPST switch

• Stand-alone options: Selectable flash rate or blinder effect

• Setting and addressing: DIP switch

• DMX channels: 1, 3, and 4 channel modes

• Receiver: RS-485

• DMX compliance: USITT DMX512/1990
  

• Type: Xenon discharge

• Approved lamps: MAX-15 Xenon (200-240 V power), MAX-7 Xenon (100-120 V power)

• Housing: Steel

• Color: Black

• Finish: Electrostatic powder-coated

• Minimum clearance around fan and air vents: 0.1 m (0.4 ft.)

• Mounting points: Five 12 mm (0.5 in.) holes in mounting bracket

• Orientation: Any

• Minimum distance to combustible materials: 0.5 m (1.7 ft.)

• Minimum distance to illuminated surfaces: 1 m (3.3 ft.)

• Power connection: 1.5 m (4.9 ft.) cable tail, 14 AWG

• DMX data in/out: 3-pin and 5-pin XLR sockets

• AC power (MAX-7 model): 100-120 V nominal, 50/60

• Hz AC power (MAX-15 model): 200-240 V nominal, 50/60

• Hz Power supply unit: Auto-ranging electronic switch-mode

• Typical current consumption (MAX-15, high power mode): 8 A

• Peak current consumption: 33 A

• Main fuse (all AC power voltages): 20 AT (slow blow), 250 V

• AC mains power cable: 14 AWG or 2.5mm2

• Maximum ambient temperature (Ta max.): 40° C (104° F)

• Minimum ambient temperature (Ta min.): 5° C (41° F)

• Maximum lamp socket temperature: 120° C (248° F)

• Items MAX-15 Xenon lamp (installed, EU model): P/N 97010307

• MAX-7 Xenon lamp (installed, US model): P/N 97010308

• User manual: P/N 35000094

FULL-BRIDGE PWM MOTOR DRIVER

The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.

The L6219 with a few external components form a complete control and drive circuit for LS-TTL or microprocessor controlled stepper motor system. The power stage is a dual full bridge capable of sustaining 46V and including four diodes for current recirculation.

A cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction.

An internal pulse-width-modulation (PWM) controls the output current to 750 mA with peak startup current up to 1 A.

Wide range of current control from 750 mA (each bridge) is permitted by means of two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.

*ABLE TO DRIVE BOTH WINDINGS OF BIPOLAR STEPER MOTOR *OUTPUT CURRENT UP TO 750mA EACH WINDING *WIDE VOLTAGE RANGE 10V TO 46V *HALF-STEP, FULL-STEP AND MICROSTEPPING MODE *BUILT-IN PROTECTION DIODES *INTERNAL PWM CURRENT CONTROL *LOW OUTPUT SATURA TION VOLTAGE *DESIGNED FOR UNSTABILIZED MOTOR SUPPLY VOLTAGE *INTERNAL THERMAL SHUTDOWN

STEPPER MOTOR DRIVER, 6219, DIP24; Motor Type:Stepper; No. of Outputs:4; Output Current:1A; Driver Case Style:DIP; No. of Pins:24; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Base Number:6219; Device Type:Motor; IC Generic Number:6219; IC Temperature Range:Commercial; Logic Function Number:6219; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Output Current Max:0.75A; Package / Case:DIP; Supply Voltage Max:46V; Supply Voltage Min:10V; Termination Type:Through Hole

• Able to drive both windings of bipolar stepper motor
• Output current up to 750 mA each winding
• Wide voltage range: 10 V to 46 V
• Half-step, full-step and microstepping mode
• Built-in protection diodes
• Internal PWM current control
• Low output saturation voltage
• Designed for unstabilized motor supply voltage
• Internal thermal shutdown