| Content |
The Showtec CO2 Q-Lock system is a complete range of products to create a fast and safe way to build all kinds of CO2 setups. It can be applied for both rental and fixed installations. The Q-Lock products are all are equipped with male and female quick lock couplers. They have back pressure valves to guarantee a closed and save system at all times . The CO2 Q-Lock range consists of hoses, splitters, combiners, a distributor and various adapters. With the splitters and the combiners it is possible to integrate multiple shooters, FX Ice Jets or multiple bottles in one system. The adapters are used on the Showtec CO2 Ice Gun, FX Ice Jets or hoses with thread to upgrade them to all Q-Lock applications.
Note: If you use Q-Lock products always make sure that your Ice Guns and Ice Jets are prepared with CO2 3/8 Q-Lock female adapters.
Quick and safe connection
Closed system
Saves CO2 Gas
Combine multiple bottles and hoses in one closed setup
Specifications
Max pressure: 175 bar / 2537 psi
Safety ratio: 1:4
Inner shell material: Polyester
Outer shell material: Polyurethane
Internal diameter: 9,7mm
External diameter: 16,0mm
Min. Bend radius: 60mm
Input: male QLock
Output: female QLock
Length: 10m
Weight G/m: 155gr
These hoses meet/exceed standard SAEJ517 sec. SAE100R7 - EN 855 - ISO 3949 |
Info
Extension Cable DMX, IP65, 3 meters, with XLR 3 pin, male and female.
|
Power supply for Atomic Strobe or Colourchanger.
|
Music Blacklight
1 tube
The Music Blacklight gives an extra dimension to the standard blacklights. This Music Blacklight can be music-controlled and therefore you can create your own Blacklight-show, which dances to the music. The Music Blacklight is available in 2 versions: with one tube and with two tubes. Through a switch on the backside, two working modes can be selected: Music Function and Static. Blacklight-bulb included.
Technical Info
Power Supply: 240V/50 Hz
Power Consumption: 40W
Weight: 4,3 kg
Dimensions: 480 x 170 x 145 mm
Lamp included!
Lamp replaceable: ordercode 82487
| The Artex harness AX60 S ( Article 1062) in accordance with EN 361 / EN 358 has length adjustable shoulder , leg straps and is equipped with a back header plate m . Anchorage in the shoulder area , 2 catch loops in the chest area and a wide, padded backrest equipped . The safety harness AX 60 S is available in this variant with fall arrest on tether . The Auffangurt AX 60 S is suitable for collecting , abseiling , holding , climbing and rescue .
SK 12-Y Verbindungsmittel mit Bandfalldämpfer
Der Artex Auffanggurt AX60 S (Artikel 1062) nach EN 361 / EN 358 hat längeneinstellbare Schulter-, Beingurte und ist mit einer Rückenverteilerplatte m. Auffangöse im Schulterbereich, 2 Auffangschlaufen im Brustbereich und einer breiten, gepolsterten Rückenstütze ausgestattet. Den Auffanggurt AX 60 S gibt es in dieser Variante mit Steigschutzöse am Haltegurt. Der Auffangurt AX 60 S eignet sich zum Auffangen, Abseilen, Halten, Steigen und Retten.
Artikeldetails
Rückenverteilerplatte m. Auffangöse im Schulterbereich
Gurtverschluss im Brustbereich
vordere Auffangschlaufen i. Brustbereich
Schulter- und Beingurte längeneinstellbar
Durchsteckverschluss (Schnellverschluss) an den Beingurten u. Haltegurt
Haltegurt / Leibgurt m. seitl. Halteösen
breite, gepolsterte Rückenstütze
Steigschutzöse am Haltegurt
Sitzgurt
Gewicht: 1,6kg
Farbe: orange / blau |
The Atomic 3000 DMX is a powerful and rugged, 3000 W high-impact strobe.
* 3000 W long-life Xenon lamp included
* 5600 K color temperature
* Continuous blinder effect with auto fade
* Quiet temperature-controlled fan cooling
* Smart integrated heat control eliminates cool down time
* Atomic Detonator remote control, socket kit for lamp change
* Auto-ranging power supply (100-240 V, 50/60 Hz)
* DMX, stand-alone, master/slave or Detonator remote control
* Preprogrammed special effects
Specifications
Physical
- Length: 425 mm (16.7 in.) without bracket
- Width: 245 mm (9.6 in.) without bracket
- Height: 240 mm (9.4 in.) without bracket
- Weight: 7.5 kg (16.5 lbs.) without bracket
Dynamic
- Effects Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply)
- Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply)
- Strobe intensity: Blackout - maximum
- Blinder effect: Continuous with auto fade
- Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash
Control and Programming
- Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1
- Stand-alone control: Via N.O. or N.C. SPST switch
- Stand-alone options: Selectable flash rate or blinder effect
- Setting and addressing: DIP switch
- DMX channels: 1, 3, and 4 channel modes
- DMX compliance: USITT DMX512/1990
Lamp
- Approved lamps: MAX-15 Xenon (200-240 V power), MAX-7 Xenon (100-120 V power)
Construction
- Finish: Electrostatic powder-coated
Installation
- Minimum clearance around fan and air vents: 0.1 m (0.4 ft.)
- Mounting points: Five 12 mm (0.5 in.) holes in mounting bracket
- Minimum distance to combustible materials: 0.5 m (1.7 ft.)
- Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
Connections
- Power connection: 1.5 m (4.9 ft.) cable tail, 14 AWG
- DMX data in/out: 3-pin and 5-pin XLR sockets
Electrical
- AC power (MAX-7 model): 100-120 V nominal, 50/60
- Hz AC power (MAX-15 model): 200-240 V nominal, 50/60
- Hz Power supply unit: Auto-ranging electronic switch-mode
- Typical current consumption (MAX-15, high power mode): 8 A
- Peak current consumption: 33 A
- Main fuse (all AC power voltages): 20 AT (slow blow), 250 V
- AC mains power cable: 14 AWG or 2.5mm2
Thermal
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 5° C (41° F)
- Maximum lamp socket temperature: 120° C (248° F)
Included
- Items MAX-15 Xenon lamp (installed, EU model): P/N 97010307
- MAX-7 Xenon lamp (installed, US model): P/N 97010308
- User manual: P/N 35000094
|
Reviews
There are no reviews yet.