Content | • Powerful Output
• Stylish design
• 1500W Heater
• Including Wired Remote Controller
• Suitable for Club, DJ, Stage
Specifications Power Supply: 240VAC / 50Hz
Heater: 1500W
Output: 30000 cu.Ft/min
First Heat op time: 6 minutes
Tank Capacity: 2,5 liter
Fluid Consumption: 1L / 8 min. (full output)
Include Remote: Wired Timer Remote
Remote Connection: 5 Pole Din
Cable Length Remote: 5 meter
Power Input: IEC
Dimensions: 300 x 400 x 190 mm
Weight: 7 kg |
JEM Air Force 2, The AF-2 is a high output fully DMX (3 + 5 pin) controllable fan. It has been designed with theme parks, stage applications and theatres in mind. With its massive power it easily projects smoke over long distances, works as a wind effect or simply converts smoke or fog into haze. Very high output, Fan speed 0 - 1,380rpm, Airflow: 6,500m³/h, Fan casing constructed from aluminum sheet for minimal weight, only 17kg!, 3 & 5 pin DMX as standard, Multifunctional controller, Very high quality sealed fan motor designed to withstand high condensation levels associated with close proximity fog, Aluminum hanging bracket allowing 360° rotation, compatible with the Omega clamp system.
| DMX-controlled smoke-machine
* Powerful smoke-machine for medium-sized discotheques or medium-sized stages
* Control via comfortable remote-control with LCD-display
* LED Fluidlevel-display
* Pump stops automatically when the fluid is depleted
* DMX-control via every standard DMX-controller
* Without mounting-bracket for standing installation
* Wide range of accessories available
SPECIFICATIONS:
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
1500 W |
IP classification: |
IP20 |
Power connection: |
Fixed power supply cord with safety plug |
Warm-up time: |
Approx. 2 min |
Output volume: |
Approx. 430 m³/min |
Output distance: |
Approx. 3 m |
Tank capacity: |
2,3 l |
Fluid consumption: |
Approx. 30 ml/min |
DMX channels: |
1 |
DMX input: |
1 x 3-pin XLR (M) mounting version |
DMX output: |
1 x 3-pin XLR (F) mounting version |
Control: |
DMX; Wireless remote control; wired remote control |
Housing color: |
Silver |
Attachment system: |
Mounting bracket |
Carrier frequency: |
433,92 MHz |
Color: |
Silver |
Dimensions: |
Width: 27,5 cm
Depth: 40 cm
Height: 28 cm |
Weight: |
6,00 kg |
Remote control |
Cable length: |
3 m |
Battery: |
1 x 12 V 23AE alkaline manganese built-in |
|
Unlimited creative possibilities with this powerful smoke-machine!
* Ideal for small to medium-sized discotheques or small stages * On/Off remote-control included * Remote-control connection via 3-pin IEC-socket * With mounting-bracket for hanging installation * Economic temperature-control of the heating element * Wide range of accessories available
SPECIFICATIONS: Power supply: 230 V AC, 50 Hz ~ Power consumption: 1000 W Smoke-output: approx. 5 m Warm-up time: approx. 4 min. Fluid consumption: approx. 130 ml/min. Output volume: approx.140 m?/min. Tank capacity: 1.5 l Dimensions (LxWxH): 385 x 310 x 165 mm Weight: 5 kg |
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method. Main Features: 1. Intelligent Wireless Control System Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area. 2. Opto-electronic Fluid Sensor When the fluid recipient runs dry,the fluid sensor stops pumping automatically to protect pump from burning. 3. More Efficient New Heat Exchanger Design It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others. 4. New Advanced PCB (Printed Circuit Board) Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.
Specification
» Power : AC100V/AC120V/AC230V/AC240V,50Hz-60Hz » Heater : 800 W » Output : 3,000 cu.ft / min » First Heat-up Time : 100 seconds » Tank Capacity : 0.8 liter » Fluid Consumption Rate : 60 min / 0.8liter (100% Output) » Remote Included : W-1 Wireless Remote » Weight : 3.8 Kg » Dimensions (mm) : L 315 W 128 H 166 » Liquid Used : Antari FLR / FLG Liquid
|
MDG MAX 3000 APS Smoke Machine 715W
Extremely powerful,adjustable fog output Virtually noiseless, with the finest fog and the longest hanging times Automatic Purging System (APS) to prevent build-up and clogging Compatible with remote control timer and DMX interface Detachable remote control and 8 m (26 ft) cable included
Powerful fog output (up to 85 m3/3,000 ft3 per minute) Portability option
TECHNICAL DATA MAX 3000APS Maximum fog output 85 m3 (3,000 ft3) per minute Fluid consumption 1 L (34 oz) per hour at 2.76 bar (40 psi) Gas type CO2 or N2 Gas consumption 0.97 kg (2.13 lb) per hour at 2.76 bar (40 psi) Reservoir capacity 2.5 L (0.66 US gallon) Automatic Purging Standard feature System (APS) Fog colour Pure white Particle size 0.5-0.7 microns Warm-up time (maximum) 8 minutes Fluid type MDG Neutral Fluid (M.S.D.S. available on request) Operating voltage 115 or 230 VAC, 50/60 Hz Power consumption 715 W Dimensions Length 61 cm (24?) Width 18 cm (7?) Height 30 cm (12?) Weight 20 kg (43 lb) Shipping weight 33 kg (72 lb) (with flight case) Approval CE approved, CSA and UL pending |
Reviews
There are no reviews yet.