| Content | • No cables or winch
• Load 80 kg
• Lightweight design
Showtec introduces a new revolutionary range of stands. The new Basic series offer true wind up stands with a high load capacity of 80 kg but without the need of any cable. Due to this revolutionary concept the stand is more safe and reliable than any other stand in the market. All components are produced in Europe and are compliance with TUV and GS standards.
Specifications Maximum load: 80 kg
Maximum height: 3,80m
Minimum height: 1,80m
Diameter of ground space: 1,18m
Tube diameter: 35mm
Weight: 17 kg
| Proffesional wind up stand made of strenghtened steel loads up to 60kg. Installed ratchet lock protects fixed equipment against uncontrolled falling down and damage. Itʼs an ideal solution for mobile DJ and musicians.
Material: steel
Load capacity: 60 kg
Maximum height: 2,70 m
Base spread diameter: 1,54 m
Height: 1,60 m
Pipe diameter: 35 mm
Weight: 12 kg |
Well equipped to handle the daily grind and time constraints of touring: That\'s the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the standard series, the base is slightly smaller, but it still offers the same amount of stability. The added bonus here is that it can now also be used as a divider in Transflex cases. The base-to-pole connection has been made stronger by adding a reinforcing sleeve to prevent wobbling. With the 35 mm extension tube featuring a M10 female thread, the stand can be extended in height up to 2.40 meters. Thanks to the automatic LockPin® technology, it has never been easier to adjust the height of a stand. Because the pin automatically snaps into the holes when adjusting upwards, a separate locking pin is no longer necessary.
Product type Type Tubing material Tubing colour Tubing surface Min height Max height Transport length Height adjustment Base material Material of height adjustment Dimensions Base (W x H x D) Base weight Max. load capacity Weight |
- Medium lighting stand with crossbeam
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Product type
Stands and Tripods
Stand surface
Powder coated
Crossbar surface
Powder coated
Holding fixture for TV Spigot
Yes
| Wind-Up Lightstand Max. load 30 kg
Three section, chrome plated steel stand with geared column. 3 sections. Tube diameters 55, 45, 38 mm. 2 risers extend simultaneously at one elevation of 4,4 cm per handle turn.
The 70104 Wind-Up Light Stand has a massive 30kg load capacity. The 3 Section Stand has a winding handle to make it easier to raise and lower large lights and diffusers. The handle has an self-locks for safety. A single clockwise revolution of the handle raises the stand 44mm while a counter-clockwise revolution will lower the stand by the same amount. The Wind-up Light Stand features a levelling leg that can be extended to adjust for an incline or uneven terrain. The stand includes a skid-proof footstep located at the main section of its base allowing access to its upper section to make adjustments if needed.
Technical Info
Length 193.36 cm
Width 23.5 cm
Height 23.5 cm
Weight 22.4 kg
Risers 2
Sections 3
1st Riser Diameter 55 mm
2nd Riser Diameter 45 mm
3rd Riser Diameter 38 mm
Leg Diameter 30 mm
Primary Material Chrome Plated Steel
Secondary Material Aluminum Locking Collars
Tertiary Material Stainless Steel Bolts
Leveling Leg Yes
Fixed Stand Adapter Triple Function Universal Head with 1-1/8 in (28 mm) and 5/8 in (16 mm) Receivers with Multi-Direction 5/8 in (16 mm) Stud
Stand Adapter Type Welded
Spring cushioned No
Closed Length 181 cm
Minimum Height 178.44 cm
Maximum Height 380 cm
Maximum Load 30 kg
Footprint Diameter 128 cm
Insertion diameter: 28 mm (standard TV spigot) | Adam Hall Stands SLS 6
Lighting Stand
- Lightweight lighting stand with crossbeam and 2-stage boom arm
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
steel
Truss material
steel
Stand surface
powder coated
Crossbar surface
powder coated
Stand colour
Black
Number of extensions
2
Min. height
1240 mm
Max height
2730 mm
Transport length
1080 mm
Max. load
25 kg
Holding fixture for TV Spigot
yes
TV spigot
17 mm
Crossbar length
920 mm
Tiltable crossbar
no
Weight
3,95 kg |
Reviews
There are no reviews yet.