SHOWTEC 71310 RainCover 60cm

The Showtec RainCover is the ideal and cost-effective solution to protect your valuable fixtures during outdoor events. More and more events and festivals are outdoor. However there are not many solutions to protect your equipment during outdoor use.
The Showtec RainCover is an easy and very effective solution to this problem. It contains  a strong 60cm aluminum base which is equipped with 2 trigger clamps and a strong safety cable. Inside the RainCover, a strong 50mm tube is mounted in order to allow you to easily rig your fixture into the RainCover
The RainCover can be equipped with a 35cm, 60cm straight transparent sleeve or a 65cm cone shaped transparent sleeve. 

THE PROTECTIVE SLEEVE IS NOT INCLUDED IN THE PRICE/PACKAGE

Power supply for Atomic Strobe or Colourchanger.

FULL-BRIDGE PWM MOTOR DRIVER

The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.

The L6219 with a few external components form a complete control and drive circuit for LS-TTL or microprocessor controlled stepper motor system. The power stage is a dual full bridge capable of sustaining 46V and including four diodes for current recirculation.

A cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction.

An internal pulse-width-modulation (PWM) controls the output current to 750 mA with peak startup current up to 1 A.

Wide range of current control from 750 mA (each bridge) is permitted by means of two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.

*ABLE TO DRIVE BOTH WINDINGS OF BIPOLAR STEPER MOTOR *OUTPUT CURRENT UP TO 750mA EACH WINDING *WIDE VOLTAGE RANGE 10V TO 46V *HALF-STEP, FULL-STEP AND MICROSTEPPING MODE *BUILT-IN PROTECTION DIODES *INTERNAL PWM CURRENT CONTROL *LOW OUTPUT SATURA TION VOLTAGE *DESIGNED FOR UNSTABILIZED MOTOR SUPPLY VOLTAGE *INTERNAL THERMAL SHUTDOWN

STEPPER MOTOR DRIVER, 6219, DIP24; Motor Type:Stepper; No. of Outputs:4; Output Current:1A; Driver Case Style:DIP; No. of Pins:24; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Base Number:6219; Device Type:Motor; IC Generic Number:6219; IC Temperature Range:Commercial; Logic Function Number:6219; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Output Current Max:0.75A; Package / Case:DIP; Supply Voltage Max:46V; Supply Voltage Min:10V; Termination Type:Through Hole

• Able to drive both windings of bipolar stepper motor
• Output current up to 750 mA each winding
• Wide voltage range: 10 V to 46 V
• Half-step, full-step and microstepping mode
• Built-in protection diodes
• Internal PWM current control
• Low output saturation voltage
• Designed for unstabilized motor supply voltage
• Internal thermal shutdown

• 6-way power strip with plastic housing
• Sockets are 45° rotated
• Surge protection
• With illuminated 2-pole rocker switch
• Colour: white