SHOWTEC 71311 Separate sleeve for RainCover Ø 60cm

No longer available!

61.27 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Height: 35cmTop diameter: 51cmBottom diameter: 55cmMounting: by Velcro

 

Read more

Height: 35cm
Top diameter: 51cm
Bottom diameter: 55cm
Mounting: by Velcro

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “SHOWTEC 71311 Separate sleeve for RainCover Ø 60cm”

Your email address will not be published. Required fields are marked *

Quick Comparison

SHOWTEC 71311 Separate sleeve for RainCover Ø 60cm removeST electronics L6219 DIP-24 STEPPER MOTOR DRIVER removeSHOWTEC 60692 Z-5 Remote Control for Z-800 and Z-1000 removeMARTIN Atomic 3000 DMX STROBE removeARTEX AX60S Full Body Harness with SK 12-Y SET removeMartin MAXEDIA Compact Digital Media Composer remove
NameSHOWTEC 71311 Separate sleeve for RainCover Ø 60cm removeST electronics L6219 DIP-24 STEPPER MOTOR DRIVER removeSHOWTEC 60692 Z-5 Remote Control for Z-800 and Z-1000 removeMARTIN Atomic 3000 DMX STROBE removeARTEX AX60S Full Body Harness with SK 12-Y SET removeMartin MAXEDIA Compact Digital Media Composer remove
Image
SKU71311L621960692Atomic 3000 DMXAX60S-PLEYSBELMAXEDIA Compact
Rating
Price 61.27 incl. GR VAT6.04 incl. GR VAT 57.89 incl. GR VAT 845.00 incl. GR VAT 170.00 incl. GR VAT10,940.56 incl. GR VAT
Stock

Out of stock

In stock

Only 5 left in stock

Only 1 left in stock (can be backordered)

Only 2 left in stock

Only 1 left in stock (can be backordered)

AvailabilityOut of stockIn stockOnly 5 left in stockOnly 1 left in stock (can be backordered)Only 2 left in stockOnly 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Height: 35cm
Top diameter: 51cm
Bottom diameter: 55cm
Mounting: by Velcro

FULL-BRIDGE PWM MOTOR DRIVER

The L6219 is a bipolar monolithic integrated circuits intended to control and drive both winding of a bipolar stepper motor or bidirectionally control two DC motors.

The L6219 with a few external components form a complete control and drive circuit for LS-TTL or microprocessor controlled stepper motor system. The power stage is a dual full bridge capable of sustaining 46V and including four diodes for current recirculation.

A cross conduction protection is provided to avoid simultaneous cross conduction during switching current direction.

An internal pulse-width-modulation (PWM) controls the output current to 750 mA with peak startup current up to 1 A.

Wide range of current control from 750 mA (each bridge) is permitted by means of two logic inputs and an external voltage reference. A phase input to each bridge determines the load current direction. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.

 

*ABLE TO DRIVE BOTH WINDINGS OF BIPOLAR STEPER MOTOR *OUTPUT CURRENT UP TO 750mA EACH WINDING *WIDE VOLTAGE RANGE 10V TO 46V *HALF-STEP, FULL-STEP AND MICROSTEPPING MODE *BUILT-IN PROTECTION DIODES *INTERNAL PWM CURRENT CONTROL *LOW OUTPUT SATURA TION VOLTAGE *DESIGNED FOR UNSTABILIZED MOTOR SUPPLY VOLTAGE *INTERNAL THERMAL SHUTDOWN

 

 

STEPPER MOTOR DRIVER, 6219, DIP24; Motor Type:Stepper; No. of Outputs:4; Output Current:1A; Driver Case Style:DIP; No. of Pins:24; Operating Temperature Range:0°C to +70°C; SVHC:No SVHC (20-Jun-2011); Base Number:6219; Device Type:Motor; IC Generic Number:6219; IC Temperature Range:Commercial; Logic Function Number:6219; Operating Temperature Max:70°C; Operating Temperature Min:0°C; Output Current Max:0.75A; Package / Case:DIP; Supply Voltage Max:46V; Supply Voltage Min:10V; Termination Type:Through Hole

 

Key Features
  • Able to drive both windings of bipolar stepper motor
  • Output current up to 750 mA each winding
  • Wide voltage range: 10 V to 46 V
  • Half-step, full-step and microstepping mode
  • Built-in protection diodes
  • Internal PWM current control
  • Low output saturation voltage
  • Designed for unstabilized motor supply voltage
  • Internal thermal shutdown

 

 

 

Remote Control for Z-800 and Z-1000

 

The Atomic 3000 DMX is a powerful and rugged, 3000 W high-impact strobe.

    * 3000 W long-life Xenon lamp included
    * 5600 K color temperature
    * Continuous blinder effect with auto fade
    * Quiet temperature-controlled fan cooling
    * Smart integrated heat control eliminates cool down time
    * Atomic Detonator remote control, socket kit for lamp change
    * Auto-ranging power supply (100-240 V, 50/60 Hz)
    * DMX, stand-alone, master/slave or Detonator remote control
    * Preprogrammed special effects
 

Specifications Physical
  • Length: 425 mm (16.7 in.) without bracket
  • Width: 245 mm (9.6 in.) without bracket
  • Height: 240 mm (9.4 in.) without bracket
  • Weight: 7.5 kg (16.5 lbs.) without bracket
Dynamic
  • Effects Variable strobe: 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply) 
  • Strobe rate: 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply)
  • Strobe intensity: Blackout - maximum
  • Blinder effect: Continuous with auto fade
  • Special effects: Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash
Control and Programming
  • Control options: DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1
  • Stand-alone control: Via N.O. or N.C. SPST switch
  • Stand-alone options: Selectable flash rate or blinder effect
  • Setting and addressing: DIP switch
  • DMX channels: 1, 3, and 4 channel modes
  • Receiver: RS-485
  • DMX compliance: USITT DMX512/1990
Lamp
  • Type: Xenon discharge
  • Approved lamps: MAX-15 Xenon (200-240 V power), MAX-7 Xenon (100-120 V power)
Construction
  • Housing: Steel
  • Color: Black
  • Finish: Electrostatic powder-coated
Installation
  • Minimum clearance around fan and air vents: 0.1 m (0.4 ft.)
  • Mounting points: Five 12 mm (0.5 in.) holes in mounting bracket
  • Orientation: Any
  • Minimum distance to combustible materials: 0.5 m (1.7 ft.)
  • Minimum distance to illuminated surfaces: 1 m (3.3 ft.)
Connections
  • Power connection: 1.5 m (4.9 ft.) cable tail, 14 AWG
  • DMX data in/out: 3-pin and 5-pin XLR sockets
Electrical
  • AC power (MAX-7 model): 100-120 V nominal, 50/60
  • Hz AC power (MAX-15 model): 200-240 V nominal, 50/60
  • Hz Power supply unit: Auto-ranging electronic switch-mode
  • Typical current consumption (MAX-15, high power mode): 8 A
  • Peak current consumption: 33 A
  • Main fuse (all AC power voltages): 20 AT (slow blow), 250 V
  • AC mains power cable: 14 AWG or 2.5mm2
Thermal
  • Maximum ambient temperature (Ta max.): 40° C (104° F)
  • Minimum ambient temperature (Ta min.): 5° C (41° F)
  • Maximum lamp socket temperature: 120° C (248° F)
Included
  • Items MAX-15 Xenon lamp (installed, EU model): P/N 97010307
  • MAX-7 Xenon lamp (installed, US model): P/N 97010308
  • User manual: P/N 35000094
The Artex harness AX60 S ( Article 1062) in accordance with EN 361 / EN 358 has length adjustable shoulder , leg straps and is equipped with a back header plate m . Anchorage in the shoulder area , 2 catch loops in the chest area and a wide, padded backrest equipped . The safety harness AX 60 S is available in this variant with fall arrest on tether . The Auffangurt AX 60 S is suitable for collecting , abseiling , holding , climbing and rescue . SK 12-Y Verbindungsmittel mit Bandfalldämpfer Der Artex Auffanggurt AX60 S (Artikel 1062) nach EN 361 / EN 358 hat längeneinstellbare Schulter-, Beingurte und ist mit einer Rückenverteilerplatte m. Auffangöse im Schulterbereich, 2 Auffangschlaufen im Brustbereich  und einer breiten,  gepolsterten Rückenstütze  ausgestattet. Den Auffanggurt AX 60 S gibt es in dieser Variante mit Steigschutzöse am Haltegurt. Der Auffangurt AX 60 S eignet sich zum Auffangen, Abseilen, Halten, Steigen und Retten. Artikeldetails Rückenverteilerplatte m. Auffangöse im Schulterbereich Gurtverschluss im Brustbereich vordere Auffangschlaufen i. Brustbereich Schulter- und Beingurte längeneinstellbar Durchsteckverschluss (Schnellverschluss) an den Beingurten u. Haltegurt Haltegurt / Leibgurt m. seitl. Halteösen breite, gepolsterte Rückenstütze Steigschutzöse am Haltegurt Sitzgurt Gewicht: 1,6kg Farbe: orange / blau

 

Offering an intuitive plug-and-play digital media solution for clubs and retail environments, Maxedia Compact offers the Maxedia software in an attractive and small system designed for powerful video and animation playback and real-time manipulation.

    * Intuitive user interface
    * DMX-in with universal USB/DMX interface
    * 6 x 3D engine layer
    * 1 top layer
    * Effect plug-ins
    * Pixelmapping / DMX out
    * Video speed control
    * Two video output configurations (Out 1 + GUI or Out 1 + Out 2)

Physical
Length: 325 mm (12.8 in.)
Width: 240 mm (9.4 in.)
Height: 195 mm (7.7 in.)

Control/User Interface
Real-world paradigm intuitive interface (images, dynamic text labels and actuals preferred to figures)
Maxxyz/Maxedia family user interface
16 x customizable screen workspace/configurations
Touch-screen compatible user interface
Keymapping (cues and transitions assignable to keyboard keys for instant triggering)
Fixture patches identical with Maxxyz series, can be imported from Maxxyz
DMX Viewer for DMX IN value reports
6 x 3D engine layers
Static and dynamic effect presets (e.g. blending, moves)
Range of 2D and 3D plug-ins, various media
Shader and shader media
Video cue recording, no limits
Transitions and wipes
Output parameter adjustments, keystoning and framing
Masking

 

Weight2.00 kg0.02 kg0.20 kg2.00 kg2.00 kg20.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 0.02 kg
Weight 0.20 kg
Weight 2.00 kg
Weight 2.00 kg
Weight 20.00 kg