Content |
Specifications
Voltage: AC 230V-50Hz Power Consumption: 14W LED: 410nm UV SMD LED Max. ambient temp. ta: 25°C Max. housing temp. tc: 55°C Min. distance from flammable surfaces: 0.5m Dimensions: 1222 x 99 x 45mm Weight: 1,005 kg
EAN:
8717748370266
|
ADJ's Quad Phase HP is designed to fill a room and dazzle a crowd with dozens of razor sharp beams of light. This technologically advanced moonflower features a high-powered, 32-Watt 4-in-1 quad color LED source (RGBW). Offering twice as many majestic colors as a "TRI LED“, the Quad Phase HP produces up to fifteen colors in all.
The Quad Phase HP also offers all the latest features sought after in special effects lights such as: DMX-512 for programming or linking capabilities, exciting built-in sound active programs, no duty cycle (run all night), a long life, high output LED source (30,000 hours), 4-button DMX display on rear (for easier programmability), IEC power daisy-chaining, and a 1.8-degree steeper motor for smooth movement. The Quad Phase HP may be controlled by a DMX Controller or ADJ's UC3 easy-to-use mini controller.
Specifications:
High output Moonflower effect with 32-Watt Quad-Color LED 4-in-1 (Red, Green, Blue, White) technology produces color-changing beams of light
Dozens of razor sharp beams fill a dance floor, ceiling or wall
Using a 1.8 Degree Long Life Stepper motor Technology it can produce quick accurate movement or smooth fluid move movements for mood music
4 DMX Channels (Color, Rotation, Strobe, Dimmer)
Operation modes: Sound Active, Master/Slave or DMX-512
Exciting built-in programs (Sound Active & Master/Slave modes)
Produces 15 Preset Colors
Linkable via 3-pin XLR cable
4-button DMX display on rear panel
Beam Angle: 65 degree
Strobe & Pulse LED Effect
DMX-512 Protocol
Electronic Dimming: 0 - 100%
Runs extremely cool! - NO Duty Cycles! - Run all night!
Compatible with the ADJ UC3 easy-to-use controller (sold separately)
IEC AC IN/OUT on rear to daisy chain power (up to 5 Quad Phase HP's @ 120V and 9 Quad Phase HP's @ 230V)
Safety hook on rear panel
Power Draw: 64W Max
Multi voltage: 100V~240V, 50/60Hz
Long life LEDs (30,000 hr. rating)
Light Source: 32W RGBW LED 4-in-1
Dimensions (LxWxH): 12.5" x 8" x 11" / 312 x 198 x 279mm
Weight: 9 lbs. / 4 kg.
|
The LookFan is the ideal accessorie for the fog generators viper 2.6 and Orka. Due to the powerful air flow the fog can be distributed quick and constant within a room. The hanging yoke guarantees a most flexible use. With the two star knobs screws the fan can be fixed quick and easy in every requested position. The connection to the viper 2.6 or Orka is done with a special plug. The LookFan can then easily be controlled via a second channel at the DMX desk or directly at the machine. It can also be used as a single wind machine.
Technical Data
Procedure Centrifugal blower Voltage 230 V / 50 Hz Air volume 1060 m3 / h Speed 1850 min-1 Power 355 W Current 1,55 A Capacitor 8/450 ?F / VDE Noise level 66 dBA Dimensions without yoke (L x W x H) 25 x 20 x 21.6 cm Weight 3.6 kg | The American DJ H2O LED uses a super bright 10W LED light source to produce a water flowing effect in orange, green, blue, yellow and white. It is designed to be projected on walls, ceilings or floors with or without fog to produce a great mood effect. Also, don't worry about the lamp burning out in the middle of an event because this 10W LED source is rated to last an outstanding 30,000 hrs.
H2O LED Features:
• Bright 10W LED simulated water flowing effect
• Designed to project on walls, ceilings or floors with or without fog – great for mood or background lighting
• Equipped with 2 glass effect wheels and 1 independent dichroic color wheel
• 6 colors: Orange, Green, Blue, Yellow, Purple and White
• High-tech plastic molded ends protect unit during transport and day-to-day use
• Manual focusing lens
• 2 operational modes: seamless scrolling colors or single color operation
• Beam angle: 34 degrees
• Includes hanging bracket
• Run all night – units stays cool – no duty cycle
• Power consumption: 22W
• Long life 10W LED (30,000 hr. rating)
• Switchable voltage: 115V/60Hz or 230V/50Hz (IEC Plug)
• Dimensions (LxWxH): 8.75”x9”x7.5” / 222x229x187mm
• Weight: 8 lbs. / 4 kg.
The H2O IR from American DJ is a 12W LED multi-colored simulated water-flowing lighting effect. It can be used in several environments for applications such as nightclubs, bars, restaurants, live shows, museums, and more.
The H20 IR produces almost no heat, requires very little power (23.8W max), has an LED rated at 30,000 hours, and has no duty cycle, allowing it to run all night long without issue. Two interchangeable lenses allow for the beam angle to be set to either 34 or 43°, depending on the intended application. The H20 IR is also compatible with the ADJ UC IR wireless remote (sold separately).
Finally, there is no end to the applications for the H20 IR. Water-flowing effects can add a unique visual dimension to any display or special event. It may be used with or without fog.
|
• LED panel delivers stunning blacklight effects
• Increase design options with blackout, static, dimmer and strobe effects
• Easily adjust flash rate, dimmer and static effects in stand-alone mode
• Eye-catching automated programs via master/slave or DMX mode
• Sound-activated programs dance to the beat of the music
• DMX Channels: 3
• DMX Connectors: 3- pin
• Light Source: 192 (UV) 0.25W (20mA) LEDs 100,000hrs
• Coverage Angle: 28°
• Wavelength: 405nm
• Power Linking: 43 units @ 120V; 74 units @ 230V
• Input Voltage: Auto-ranging 100 - 240VAC 50/60Hz
• Power and Current: 12W, 0.1A @ 120V 60Hz
• Power and Current: 11W, 0.1A @ 230V 50Hz
• Weight: 4.9lbs (2.2kg)
• Size: 14 x 9.8 x 6.5in (356 x 248 x 165mm)
• Approvals: CE
| Blacklight 60cm 18W 51101510
Complete set with UV tube
- UV tube with casing, power cord and power plug
- High ultraviolet light
- Warm-up time approx. 3 min
- Controlling by on/off switch on device
- With a beam angle of 100°
- For application areas such as: Party room; mobile djs/entertainer; Clubs/dancing school
illuminant
Package contents
- 1 x device, 1 x illuminant, 2 x mounting material, 2 x screw, 1 x user manual
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
70 W |
IP classification: |
IP20 |
Protection class: |
Protection class I |
Power connection: |
Fixed power supply cord with safety plug |
Cable length: |
Approx. 1,7 m |
Base: |
2 x G-13 |
Control: |
On/off switch on device |
Beam angle: |
100° |
Beam angle (1/2 peak): |
100° |
Housing color: |
Black |
Diameter mounting holes: |
2 x Ø4mm |
Material: |
Metal, 1 mm |
Dimensions: |
Length: 63,5 cm
Width: 10 cm
Height: 4 cm |
Weight: |
1,60 kg |
Illuminant |
Base: |
2 x G-13 |
Lamp type: |
Fluorescent lamp |
Color of light: |
UV-reflecting |
Lead time: |
180 s |
Construction: |
Tube T8 |
Wavelength: |
365 nm |
|
Reviews
There are no reviews yet.