Content |
Specifications
Voltage: AC 230V-50Hz Power Consumption: 7W LED: 410nm UV SMD LED Max. ambient temp. ta: 25°C Max. housing temp. tc: 55°C Min. distance from flammable surfaces: 0.5m Dimensions: 612 x 99 x 45mm Weight: 0,555 kg
EAN:
8717748370273
|
Specifications:
- 84 5mm LEDs 21 Red, 21 Green, 21 Blue & 21 White LEDs)
- 2 DMX Modes: 3 Channel Mode; 28 Channel mode for programming flexibility
- 3 operational modes: DMX-512; Master/Slave: Sound Active
- Built-in high-energy lighting programs (Master/Slave & Sound Active)
- Beam angle: 116 degrees
- Color strobe effect (fast to slow)
- Electronic Dimming 0 - 100%
- Linkable via 3-pin XLR cable
- 4-button LED display on rear panel
- IEC IN/OUT on rear to daisy chain power
- Includes mounting brackets
- Compatible with ADJs UC3 Controller (Sold Separately)
- Power Draw: 9W (120V) / 13W (230V)
- Multi-voltage operation: 120-240V AC,/ 50~60Hz
- Dimensions without bracket (LxWxH): 250x317x182mm
- Weight: 2.0 kg
LED Advantages:
- Long life (Rated at 100,000 hrs.)
- Low power consumption
- Very low heat output
- Run all night
- RGBW Color Beams & Color Chasing
- Colors won`t fade in time
| Features:
1.Strobe effects, red, green and blue three colors change.
2.Its light spot on the wall, the effect likes glass ball, very bright and powerful.
3.Control mode: remote , voice-activated,MP3.
4. Good quality warranty, we check and test it one by one,safe and reliable.
5.Long working life, excellent stability,small and exquisite appearance.
6.Suitable for disco, ballroom, KTV, bar, stage, club, party ,wedding etc.
Specification:
Lighting color: RGB, 6X3W, red,green,blue,yellow,white,purple
Shell material: Plastic
Light power: 10-25W
Light Source: 6x3w led
Light angel: 120 degree
Working mode: automatic or sound control , Bluetooth
Motor: stepping motor
Input: AC 110-240V/50-60Hz
Product size: Approx: 6.3* 7.87 inch (16cm*20cm) | The American DJ H2O LED uses a super bright 10W LED light source to produce a water flowing effect in orange, green, blue, yellow and white. It is designed to be projected on walls, ceilings or floors with or without fog to produce a great mood effect. Also, don't worry about the lamp burning out in the middle of an event because this 10W LED source is rated to last an outstanding 30,000 hrs.
H2O LED Features:
• Bright 10W LED simulated water flowing effect
• Designed to project on walls, ceilings or floors with or without fog – great for mood or background lighting
• Equipped with 2 glass effect wheels and 1 independent dichroic color wheel
• 6 colors: Orange, Green, Blue, Yellow, Purple and White
• High-tech plastic molded ends protect unit during transport and day-to-day use
• Manual focusing lens
• 2 operational modes: seamless scrolling colors or single color operation
• Beam angle: 34 degrees
• Includes hanging bracket
• Run all night – units stays cool – no duty cycle
• Power consumption: 22W
• Long life 10W LED (30,000 hr. rating)
• Switchable voltage: 115V/60Hz or 230V/50Hz (IEC Plug)
• Dimensions (LxWxH): 8.75”x9”x7.5” / 222x229x187mm
• Weight: 8 lbs. / 4 kg.
The H2O IR from American DJ is a 12W LED multi-colored simulated water-flowing lighting effect. It can be used in several environments for applications such as nightclubs, bars, restaurants, live shows, museums, and more.
The H20 IR produces almost no heat, requires very little power (23.8W max), has an LED rated at 30,000 hours, and has no duty cycle, allowing it to run all night long without issue. Two interchangeable lenses allow for the beam angle to be set to either 34 or 43°, depending on the intended application. The H20 IR is also compatible with the ADJ UC IR wireless remote (sold separately).
Finally, there is no end to the applications for the H20 IR. Water-flowing effects can add a unique visual dimension to any display or special event. It may be used with or without fog.
| Blacklight 60cm 18W 51101510
Complete set with UV tube
- UV tube with casing, power cord and power plug
- High ultraviolet light
- Warm-up time approx. 3 min
- Controlling by on/off switch on device
- With a beam angle of 100°
- For application areas such as: Party room; mobile djs/entertainer; Clubs/dancing school
illuminant
Package contents
- 1 x device, 1 x illuminant, 2 x mounting material, 2 x screw, 1 x user manual
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
70 W |
IP classification: |
IP20 |
Protection class: |
Protection class I |
Power connection: |
Fixed power supply cord with safety plug |
Cable length: |
Approx. 1,7 m |
Base: |
2 x G-13 |
Control: |
On/off switch on device |
Beam angle: |
100° |
Beam angle (1/2 peak): |
100° |
Housing color: |
Black |
Diameter mounting holes: |
2 x Ø4mm |
Material: |
Metal, 1 mm |
Dimensions: |
Length: 63,5 cm
Width: 10 cm
Height: 4 cm |
Weight: |
1,60 kg |
Illuminant |
Base: |
2 x G-13 |
Lamp type: |
Fluorescent lamp |
Color of light: |
UV-reflecting |
Lead time: |
180 s |
Construction: |
Tube T8 |
Wavelength: |
365 nm |
|
EUROLITE, FIB-203 LED fiber light, Valokuitunippu 1x 3W White LED
The imagination will know no limits!
- Whether as a starry ceiling, firework display, or as a unique curtain of light, the decorating possibilities are endless
- Fibre optic strands are bundled together and attached onto an illuminator
- Light is transmitted along the length of the fibres to shine at the tips
- The 1x3W LED in the illuminator provides color changing effect
- Color change speed adjustable via rotary-control
- Innumerable uses: Christmas, party and holiday lighting
- Advantages of LED-technology: extremely long life, low power consumption, minimal heat emission, defacto maintenance free with brilliant light radiation
- Power supply 230V via enclosed power unit
- For indoor use only
Technical specifications
Power supply: 230 V AC, 50 Hz ~ (via enclosed power unit)
Power consumption: 3 W
Fibre optic strand length: 2 m
Number of fibre optic strands: 200 pcs.
Number of LEDs: 1x3W white LED
Illuminator dimensions (LxWxH): circa 150 x 70 x 57 mm
Weight: circa 1.2 kg |
Reviews
There are no reviews yet.