SHOWTEC 91131 Powersplit 2 CEE 16A 3 x Schuko

No longer available!

18.48 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: 91131 Category:
Powersplit 2 CEE 16A 3 x Schuko   Input power connector: CEE 16 A male 5 pole connector Max. power load: 3 x 16A Output power connector: 3 pcs Schuko IP rate: IP-44 Dimensions: 120 x 47 x 44 mm (LxWxH) 

 

Read more

Powersplit 2 CEE 16A

3 x Schuko

 

Input power connector: CEE 16 A male 5 pole connector
Max. power load: 3 x 16A
Output power connector: 3 pcs Schuko
IP rate: IP-44
Dimensions: 120 x 47 x 44 mm (LxWxH) 

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “SHOWTEC 91131 Powersplit 2 CEE 16A 3 x Schuko”

Your email address will not be published. Required fields are marked *

Quick Comparison

SHOWTEC 91131 Powersplit 2 CEE 16A 3 x Schuko removeZero88 Switch 6 Schuko DMX 6 Channels Digital Switcher removeWork ESD 10K Automatic Voltage Regulator removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- removeDAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter removeWORK POWER SPLITTER 16A THREE-PHASE remove
NameSHOWTEC 91131 Powersplit 2 CEE 16A 3 x Schuko removeZero88 Switch 6 Schuko DMX 6 Channels Digital Switcher removeWork ESD 10K Automatic Voltage Regulator removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- removeDAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter removeWORK POWER SPLITTER 16A THREE-PHASE remove
Imagesb-1100 eurolite power distributer 32A to 16a
SKU91131SWITCH6SCHUKESD 10KSB-1100D1908POWER SPLITTER
Rating
Price18.48 incl. GR VAT 1,245.46 incl. GR VAT 814.00 incl. GR VAT 438.94 incl. GR VAT 173.59 incl. GR VAT 184.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Only 1 left in stock

In stock

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderOnly 1 left in stockIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Powersplit 2 CEE 16A 3 x Schuko   Input power connector: CEE 16 A male 5 pole connector
Max. power load: 3 x 16A
Output power connector: 3 pcs Schuko
IP rate: IP-44
Dimensions: 120 x 47 x 44 mm (LxWxH) 

Zero88 Switch 6 Schuko DMX 6 Channels Digital Switcher

Cost effective 19" dimmer

The Rack 6 is an economical choice for those wanting a rack mount DMX dimmer. Housed in a compact 2U unit the Rack 6 offers users six 10 amp circuits of dimming control. Using the latest electronic and electrical designs the Rack 6 offers real value for money. All operator controls are available through a simple, intuitive interface.

The Rack 6 is not limited in features however. Offering 12 memories, a preheat per channel, three dimmer curves and Chilli-Net compatibility the Rack 6 offers users sophistication not usually found in a dimmer in this price range.

With a range of socket options, CE certification and a three year warranty the Rack 6 is the ideal choice for users looking for a cost effective touring dimmer.


The Switch 6 is physically identical to the Rack 6, except that each channel is controlled by a heavy duty relay, instead of a dimming circuit. Ideal for switching non-dimmable loads, the Switch 6 is available with the same socket options as the Rack 6.

Features
  • 3 dimmer curves (normal, linear, switch)
  • 12 Memories
  • Preheat per channel
  • International socket options
  • 6 x 10 Amps
  • MCB per channel
  • Advanced heatsink and fan cooling
  • DMX addressing via user interface
  • 19"
  • Built in termination circuit for DMX
  • ChilliNet enabled
  • RDM hardware ready
  • Dimensions - 88mm x 483mm x 360mm
  • Weight - 8.0kg

Work ESD 10K Automatic Voltage Regulator

It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.

Technical Specifications:

Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm

Eurolite SB-1100 Practical 32 A distributor in 19" housing Practical 32 A distributor in 19" housing Specially designed for larger distribution needs 3 U necessary for installation 32 A three phase current input via 1.5 meter long 5 x 6 mm?² power cable and plug 32 A three phase current output via mounted plug secured on the back panel by a fault current circuit breaker The entire distributor is secured via 30 mA fault current circuit breaker 2 mounted CEKON sockets with 16 A on the front panel, secured via 3 x 16 A fuse blocks Control lamps indicate each phase 6 safety sockets on the housing back (2 per phase) Each pair of safety sockets feature fuse protection via 16 A automatic circuit breakers With earthing screw in order to ground a rigg if necessary Power supply: 380-400 V AC, 50 Hz ~ Max. output/channel (safety socket): 3680 W Max. current/channel (safety socket): 16 A Max. output/phase: 7360 W Max. current/phase: 32 A Height: 3 U Dimensions (LxWxH): 482 x 295 x 132 mm Weight: 6.9 kgPDU-10 Powerdistributor with Volt- and Ampere meter The DAP PDU-10 is a 19" powerdistributor (240V) for use in equipment-and effect-rack. It has 8 IEC outputs which can be switched by the switch on the front of the unit. Furthermore, the PDU-10 has a Volt and Ampere meter on the front so that you can control the voltage and current at any time in order to maximise the protection of your equipment.   240 Volt 8 IEC OutputsPOWER SPLITTER - Box connection phase separetor. - Power Input: 380 V with connector CEE 3x16A (P+N+E). - 6 schuko output with phase indicator. - Dimensions: 220 x 150 x 102 mm. - Weight: 1,8 kg.
Weight0.30 kg8.00 kg20.00 kg6.90 kg5.00 kg1.80 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 8.00 kg
Weight 20.00 kg
Weight 6.90 kg
Weight 5.00 kg
Weight 1.80 kg