SHOWTEC 91132 Powersplit 3 CEE 16A 4 x Schuko, 2 x CEE 16A 5p

86.18 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Powersplit 3 CEE 16A 4 x Schuko, 2 x CEE 16A 5p   Input power connector: CEE 16 A male 5 pole connector Max. power load: 3 x 16A Output power connector: 4 pcs Schuko, 2 pcs CEE 16A female 5 pole IP-rate: IP-44 Cable length: 1,5 m Weight: 3,4 kg 

 

Read more

Powersplit 3 CEE 16A

4 x Schuko, 2 x CEE 16A 5p

 

Input power connector: CEE 16 A male 5 pole connector
Max. power load: 3 x 16A
Output power connector: 4 pcs Schuko, 2 pcs CEE 16A female 5 pole
IP-rate: IP-44
Cable length: 1,5 m
Weight: 3,4 kg 

Weight 3.40 kg

Reviews

There are no reviews yet.

Be the first to review “SHOWTEC 91132 Powersplit 3 CEE 16A 4 x Schuko, 2 x CEE 16A 5p”

Your email address will not be published. Required fields are marked *

Quick Comparison

SHOWTEC 91132 Powersplit 3 CEE 16A 4 x Schuko, 2 x CEE 16A 5p removeWork ESD 10K Automatic Voltage Regulator removeSHOWTEC 50294 BreakoutBar 4 Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-out removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- removeEurolite Board 10-ST w/10x safety-plug removeDAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter remove
NameSHOWTEC 91132 Powersplit 3 CEE 16A 4 x Schuko, 2 x CEE 16A 5p removeWork ESD 10K Automatic Voltage Regulator removeSHOWTEC 50294 BreakoutBar 4 Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-out removeEurolite SB-1100 Power Distributor In 32A - 2x(5x16A)+ 6x16A Schuko 19" -USED- removeEurolite Board 10-ST w/10x safety-plug removeDAP AUDIO D1908 PDU-10 Powerdistributor with Volt- and Ampere meter remove
ImageSHOWTEC 50294 BreakoutBar 4 Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-outsb-1100 eurolite power distributer 32A to 16a
SKU91132ESD 10K50294SB-1100BOARD-10STD1908
Rating
Price86.18 incl. GR VAT 814.00 incl. GR VAT 97.95 incl. GR VAT 438.94 incl. GR VAT 138.00 incl. GR VAT 173.59 incl. GR VAT
Stock

Available on backorder

Available on backorder

Only 3 left in stock

Only 1 left in stock

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderOnly 3 left in stockOnly 1 left in stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description• Manufacturer: Showtec • Connecting plug: CEE 16A • Output: Schuko • Number of Channels: 3 • Number of Schuko Outputs: 6
Content

Powersplit 3 CEE 16A 4 x Schuko, 2 x CEE 16A 5p   Input power connector: CEE 16 A male 5 pole connector
Max. power load: 3 x 16A
Output power connector: 4 pcs Schuko, 2 pcs CEE 16A female 5 pole
IP-rate: IP-44
Cable length: 1,5 m
Weight: 3,4 kg 

Work ESD 10K Automatic Voltage Regulator

It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.

Technical Specifications:

Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm

BreakoutBar 4 Splitter CEE 16A 5p. > Schuko + CEE 16A 5p.-out Powersplitter from CEE 16A 5 pole three phase to 6 schuko outputs (2 per phase). Also equipped with a CEE 16A 5 pole three phase for linking multiple splitters together. Compact design. Sliding profile for easy mounting of clamps and safety-eyes.Eurolite SB-1100 Practical 32 A distributor in 19" housing Practical 32 A distributor in 19" housing Specially designed for larger distribution needs 3 U necessary for installation 32 A three phase current input via 1.5 meter long 5 x 6 mm?² power cable and plug 32 A three phase current output via mounted plug secured on the back panel by a fault current circuit breaker The entire distributor is secured via 30 mA fault current circuit breaker 2 mounted CEKON sockets with 16 A on the front panel, secured via 3 x 16 A fuse blocks Control lamps indicate each phase 6 safety sockets on the housing back (2 per phase) Each pair of safety sockets feature fuse protection via 16 A automatic circuit breakers With earthing screw in order to ground a rigg if necessary Power supply: 380-400 V AC, 50 Hz ~ Max. output/channel (safety socket): 3680 W Max. current/channel (safety socket): 16 A Max. output/phase: 7360 W Max. current/phase: 32 A Height: 3 U Dimensions (LxWxH): 482 x 295 x 132 mm Weight: 6.9 kg

Eurolite Board 10-ST w/10x safety-plug

10-fold switching panel
Fully cabled case with 10 safety-sockets
For 16 A safety-plug
10 switches with flash-buttons
10 fuseholders with 5 A

Power supply: 230 V AC, 50 Hz ~ 
Max. power output: 3680 W 
Max. current: 16 A 
Max. current/channel: 5 A 
Output sockets: 10 safety power outlets 
Fuses: F 6.3 A, 250 V 
Dimensions (LxWxH): 135 x 485 x 135 mm 
Weight: 3.3 kg

PDU-10 Powerdistributor with Volt- and Ampere meter The DAP PDU-10 is a 19" powerdistributor (240V) for use in equipment-and effect-rack. It has 8 IEC outputs which can be switched by the switch on the front of the unit. Furthermore, the PDU-10 has a Volt and Ampere meter on the front so that you can control the voltage and current at any time in order to maximise the protection of your equipment.   240 Volt 8 IEC Outputs
Weight3.40 kg20.00 kg0.90 kg6.90 kg3.30 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.40 kg
Weight 20.00 kg
Weight 0.90 kg
Weight 6.90 kg
Weight 3.30 kg
Weight 5.00 kg