| Content |
Specifications Power input: 380V, 32A
Input connector: 5 Pole 32A CEE
Power output: 6 x 230V, 32A
Output connector: Schuko
Fuses: 6 x C-16
Dimensions: 465 x 165 x 125mm ( LxWxH)
Weight: 4,5Kg
This product can only be used indoor and operated by classified personal. | 19" Power Strip 1 U with 3 separate Power Circuits
- Safety outlets each with 16 A / 250 V
- Outlets of power circuit one are ruby red
- Power circuit two is light grey and three is black
- 2-m cable with red CEE plug 16 A pro phase / 400 V
- cable on the side
- 19" brackets can be mounted in for different positions
Product type
19" rack mains socket strips
Type
19" / 1 U
Number of outlets (Earthing contact / IEC 7/4)
6 (3 x 2) , Rotated 45°
Power input
cables
Cable length
2 m
Cable connector
16 A CEE plug 400 V
Cross section
5 x 1.5 mm²
Operating voltage
400 V
Max. current
3 x 16 A
Cabinet material
Aluminium
Colour
Black
Width
485 mm
Height
44 mm
Depth
44 mm
Other features
3 phases colour-coded (red, grey, black) , Mounting brackets can be used in 4 positions
Weight
1,12 kg |
Work LP-12S Controller
12 channels driver of 1.000 W. by channel with total load 6.000 W.
Dimensions: 483 x 44 x 23 mm. Weight: 1,2 kgs. | Adam Hall Cables 87471
19" Power Strip 1U 8-way with switch
Mains Distribution Unit 19"/1 U
- Illuminated 2-pole switch on the front panel
- 8 mains outlets on the rear panel
- Black aluminium housing
- 54 mm deep
- 19 "angle can be mounted in four positions
Product type
19" rack mains socket strips
Number of outlets (Earthing contact / IEC 7/4)
8, Rotated 45°
Cable connector
angled, Earthing contact (CEE 7/7)
Cabinet material
Aluminium, Plastic
Other features
Illuminated on / off switch, Mounting brackets can be used in 4 positions
|
Work ESD 10K Automatic Voltage Regulator
It is a voltage regulator able to keep always constant the power supply in 220V
(or 110 V in the additional connector) when the voltage oscillates in a margin
from 140 to 250V ( 220 V input) or 60 to 130 V (110 V input) and connected to
a fix load of 10.000W. The need to keep a stable main voltage, above all for
systems or goods which performing depends on this value, it conserves these
regulators in an appreciated auxiliary device, when we have to supply mixers
effect appliances, etc. The incorporate 2 high brightness displays allow to read
clearly, working conditions, like input, output and main voltage. With the finality
to avoid parasite noise proceeding of the main switch, these units dispose of a
delay in the adjustable switching of 3 or 6 seconds, afterwards it runs in working
normal mode. In the protection section, both devices include protection against a
higher input voltage (255V), overheat and excess of output voltage. In these cases
the unit will switch off, transmitting an acoustic signal and a message in the display.
It disposes of a precise switch in the output voltage which allows to adjust this
parameter from a 1% to 3%.In the front panel, this unit disposes of a 63 A circuit breaker.
In the rear side are placed input/output connection CEE 32 A 3 pole. 1 additional
schucko output for 220 V and another for 110 V.
This unit is cooled by fan.
Technical Specifications:
Power supply: 140V- 250V AC.
Maximum joint load: 10000 VA.
Delay, selectable: 3 or 6 seconds .
Precision of output tension, selectable: 1% - 3%
Protections against:
Excessive temperature of 95 C
High input level
Overload
Dimensions: 460x305 x 260 mm
|
1 Multiconnector input 8 CEE outputs |
Reviews
There are no reviews yet.