Content |
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
Polar Pattern |
Supercardioid |
Frequency Response |
50 Hz - 16 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms (290 Ohms Actual) |
Output Connectors |
XLR-3 Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
9.92 oz. (278 g) |
| Dynamic largemembran-Microphone forBroadcast- and Syncronize-Studios and professionalPodcasting, internal Pop-Filter, Neodym Large membranCapsule (28 mm) cardiod, 40 Hz - 14 kHz, 115 dB SPL, Weight: 1.025g, Lenght: 215 mm, 520 mm diameter |
The E-835S is a cardioid lead vocal stage microphone specially designed to perform under pressure.
Frequency Response : 40.....16000 Hz
Sensitivity in free field, no load : (1kHz) 2,7 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 48 x 180 mm
Weight : w/o cable 330 g
|
- Tailored for Vocals & Speech
- Cardioid Polar Pattern
- Shock-Mounted Dynamic Cartridge
- 50 Hz to 15 kHz Frequency Response
The Shure 55SH Series II is a Unidyne cardioid dynamic microphone boasting a classic look and vocal-tailored sound for recording sessions, live stage applications, and on-camera use. The dynamic cartridge is shock-mounted to impede handling noise and vibrations transferred through your mic stand. The implementation of a cardioid polar pattern minimizes pickup of off-axis noise and ambience, yielding higher gain before feedback and attenuated stage bleed.
The mic delivers a frequency response of 50 Hz to 15 kHz with a gentle presence boost peaking at approximately 6.5 kHz. Its XLR 3-pin output ensures compatibility with most mixer inputs, microphone preamps, and portable PA systems. An on/off switch is provided for convenient muting of the mic between speeches or performances. The attached, self-tensioning, 5/8“-27 thread swivel mount can be tilted up to 45 degrees forward and 80 degrees backward. Chrome die-cast metal construction provides tour-worthy durability.
Classic Appearance
In addition to being a mic with solid audio characteristics for the studio and stage, the 55SH Series II makes a great prop microphone in video shoots, photos, and theater applications
Tailored Frequency Response
The 50 Hz to 15 kHz frequency response features a slight dip in the low-mid frequency range and a gentle rise from 1 to 10 kHz, making its sonic performance optimized for vocals, public address, and dialog
Cardioid Polar Pattern
The cardioid polar pattern is effective in minimizing sound pickup at the off-axis sections of the capsule, ensuring high gain before feedback
Shock-Mounted Cartridge
The dynamic capsule is shock-mounted for added protection against shock- and structure-born noise
Shure 55SH II Specs
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Cardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
None |
Performance
Frequency Range |
50 Hz to 15 kHz |
Impedance |
270 Ohms |
Sensitivity |
-58 dBV/Pa at 1 kHz |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 3.06 x L: 7.4" / ø: 77.8 x L: 188 mm |
Weight |
1.37 lb / 0.62 kg |
|
Professional dynamic microphone with On/Off switch. Very robust construction and excellent value-for-money. 4,5 m XLR male / XLR female cable included.
Product type
Microphones
Type
Vocals
Frequency response
80 - 15000lx @ 1m Hz
Directivity
cardioid
Nominal impedance
500 Ohm(s)
Max. SPL (1% THD @ 1kHz)
132 dB
Microphone input
XLR /3-pin, gold plated)
Length
165 mm
Diameter
52 mm
Accessories (included)
XLR / XLR cable, 4.5 m
Weight
0,652 kg
Features
on/off switch, locking |
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Supercardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
80 Hz |
Performance
Frequency Range |
70 Hz to 20 kHz |
Maximum SPL |
147 dB SPL |
Impedance |
600 Ohms |
Load Impedance |
2000 Ohms |
Sensitivity |
2.6 mV/Pa |
Signal-to-Noise Ratio |
76 dB A-Weighted |
Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
Weight |
11.29 oz / 320 g |
|
Reviews
There are no reviews yet.