Content |
The BLX14/CVL Lavalier Wireless System is part of the BLX wireless systems family.
Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, itʼs the most accessible way to own the stage.
Includes BLX4 wireless receiver, BLX1 bodypack transmitter, CVL lavalier microphone, power supply, lavalier clip, windscreens, and user guide.
The BLX14/CVL Lavalier Wireless Microphone System from Shure includes a BLX4 single-channel wireless receiver, a BLX1 bodypack transmitter, and a CVL Centraverse clip-on lavalier mic. The system is set to Shure\'s J10 frequency band and operates between 662-686 Mhz.
The BLX1 bodypack transmitter has a 300\' line of sight operation range with the BLX4 receiver. It is powered by two included AA batteries that can provide up to 14 hours of operation. The BLX4 receiver features microprocessor-controlled internal antenna diversity that helps prevent interference and signal dropouts. Its one-touch QuickScan feature detects the most interference-free frequency and sets the channel to it for fast setup.
CVL Centraverse Lavalier Condenser Microphone
The CVL Centraverse Lavalier Condenser Microphone from Shure is a miniature lavalier condenser microphone that is optimized for speech and vocal performance. A tie clip and windscreen are included.
Designed for low visibilityPermanently charged electret condenser element for vocal reproductionTA4F (TQG) connector integrates with Shure wireless bodypack systemsTailored frequency response optimized for public speaking and presentation
- M15 Frequency Band
- BLX4 Single-Channel Wireless Receiver
- BLX1 Bodypack Transmitter
- CVL Centraverse Lavalier Microphone
- One-Touch QuickScan Frequency Selection
- Internal Antenna Diversity
- 300\' Operating Range
- Batteries Included
CVL Centraverse Lavalier Condenser Microphone
Type |
Electret condenser |
Frequency Response |
50 Hz to 20 kHz |
Polar Pattern |
Cardioid |
Output Impedance |
600 Ω @ 1 kHz, typical |
Audio Output Level |
-43.5 dBV/Pa |
Signal to Noise Ratio |
72 dB @ 1 kHz |
Maximum SPL |
139 dB, @ 1 kHz (1,000 Ω load) |
Dynamic Range |
117 dB, @ 1 kHz (1,000 Ω load) |
Output Noise |
22 dB, typical, A-weighted |
Power Requirements |
+5 V DC (nominal), 10 V maximum (DC bias) |
Polarity |
Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 |
Cable |
50" (1.3 m) |
Connector |
TA4F |
Weight |
0.88 oz (25 g) |
BLX4 Single-Channel Wireless Receiver (M15: 662-686 Mhz)
Output |
1x XLR Output 1x 1/4" (6.35 mm) Output |
Output Impedance |
XLR: 200 ohms 1/4“: 50 ohms |
Audio Output Level |
XLR Connector: -27 dBV into 100 kOhms Load (Reference +/-33 kHz with 1 kHz Tone) 1/4“: -13 dBV into 100 kOhms Load (Reference +/-33 kHz with 1 kHz Tone) |
RF Sensitivity |
-105 dBm for 12 dB SINAD, Typical |
Image Rejection |
>50 dB, Typical |
Housing |
Molded ABS |
Power Requirement |
12 to 15 V DC @ 160 mA, Supplied by External Power Supply (Tip Positive) |
Dimensions (H x W x D) |
1.5 x 7.4 x 4.1" (40 x 188 x 103 mm) |
Weight |
8.5 oz (241 g) |
BLX1 Bodypack Transmitter (M15: 662-686 Mhz)
Audio Input |
Gain: -16 dBV (Maximum), 10 dBV (Minimum) |
Gain Adjustment Range |
26 dB |
Input Impedance |
1 MOhm |
RF Output |
10 mW, Typical |
Housing |
Molded ABS |
Power Requirement |
2x LR6 AA Batteries, 1.5 V Alkaline |
Battery Life |
Up to 14 Hours |
Dimensions (H x W x D) |
4.3 x 2.5 x 0.8" (110 x 64 x 21 mm) |
Weight |
2.6 oz (75 g) |
|
Designed for Club Sound, House of Worship, Performance & Sports Venues, and other applications. ClearScan finds the clearest channel available with the touch of one button EZsync infrared channel transfer from the receiver to the transmitter for easy and error-free setup 14 hour battery life from two AA alkaline batteries Rugged metal transmitters with backlit LCD display and battery gauge 32 preset channels, with compatible groups of 8 channels for simultanious use Bodypack with TA4 connector – compatible with all Electro-Voice lapel and headworn microphones for easy upgrades Detachable half-wave receiver TNC antennas allow for use with the APD4+ antenna distribution system Metal receiver chassis with optional rack mount ears and front mount antenna cables Antennas Flexible TNC 1/2 Wave Audio Frequency Response 80 Hz - 18kHz +/- 2dB Balanced Line Level Output (RMS Adjustable) 10 - 100 mV Battery Life 14 Hours with (2) AA alkalines typical Case Material Metal Connector Type 1/4 inch unbalanced, 3-Pin XLR balanced Controls On/Off, Set, Up, Down, Sync Distortion (@ 1 kHz, 40 kHz deviation) less than 1.0, 0.4 typical % Diversity True Antenna Dynamic Range > 95 dB Dynamic Range greater than; 95 dB Element PL22 Cardioid Dynamic Element ULM-18 Uni-directional lapel Number of Channels 32 Per Band, 8 Simultaneous Power Supply 12 VDC, 500 mA max Receiver Type Synthesized PLL, Agile UHF RF Frequency Range 16 MHz RF Output 8 mW Typical RF Sensitivity (12 dB SINAD) < 1.0 uV RF Sensitivity (12 dB SINAD) Less than 1.0 uV Signal-to-Noise Ratio (A-weighted) greater than 100 dB Signal-to-Noise Ratio (A-weighted) > 100 dB Squelch Tone code plus Amplitude |
JTS PT950B-CM501 Wireless Microphone Set
JTS PT-950B
UHF PLL pocket transmitter with lavalier microphone
All instrument microphones of the CX serires as well as headband microphones and lavalier microphones of the CX series or CM series can be operated via this stable pocket transmitter without interference. The PT-950B is supplied with the high-quality lavalier microphone CM-501; its frequency response which has been optimised for speech applications guarantees max. audibility. 193 frequencies with pilot tone technology offer highest flexibility and safe transmission.
The integrated LC display provides reliable information about battery status and transmitting frequency. Continuously adjustable gain and lock function are indispensable features for professional applications.
Supplied with stable transport box.
Features:
Carrier frequency 790-814MHz Audio frequency range 40-18,000Hz Frequency stability ±0.005% Transmitting power 10mW Connections 4-pole mini XLR Power supply 2 x batt. AA size, alkaline Operating time > 30h Dimensions 70x190x27mm (WxHxD) Weight 160g
JTS CM501
Electret lavalier microphone
This microphone is cut out for presentations and discussions. It guarantees good audibility, a secure fit due to the supplied tie clip and is quickly to install. The cartridge design of cardioid characteristic allows to pick up a precise voice of high quality over a wide dynamic range.
Supplied with windshield.
Features:
System electret/cardioid Frequency range 100-15,000Hz Impedance 2.2kΩ Sensitivity 3.2mV/Pa/1kHz Max. SPL 130dB Power supply pocket transmitter PT series or PS-500 Connections cable with 4-pole mini XLR Weight 20g
| Set with XLR female plug-on transmitter, portable 3.5mm TRS transmitter, portable 3.5mm receiver and lavalier microphone
General Characteristics
- Wireless entry-level plug & play series operating in the 2.4 GHz spectrum for license-free worldwide use
- Lightweight, compact plug-on transmitters and receivers, offering either XLR, jack (6.3mm, 1/4”) or mini jack (3.5mm, 1/8”) connections as well as a pedalboard receiver with female jack and XLR male chassis outputs
- Intuitive single-button interface to manage all power, linking, muting and battery monitoring tasks
- Up to 5 systems can be operated simultaneously at a maximum range of up to 75m
- All portable devices feature USB re-chargeable lithium-ion batteries that provide up to 5 hours of runtime
Delivery Includes:
- ME2-II clip-on lapel mic
- XSW-D-Mini-Jack-Tx 3.5mm female socket portable transmitter
- XSW-D-XLR-Female-Tx female XLR plug-on transmitter
- XSW-D-Mini-Jack-Rx female socket portable receiver
- Belt clip for the XSW-D-Mini-Jack-Tx transmitter
- Cold shoe mount
- 3.5mm coiled cable
- USB-A to USB-C charging cable
|
Sennheiser ew 100 G4-ME2 B-Band
Specifications :
- UHF Wireless System with SK 100 G4-S pocket transmitter and ME 2-II condenser Lapel micropohone
- omni-directional
- EM 100 G4 9,5" receiver
- 42 MHz bandwidth
- 20 banks with each up to 12 presets
- up to 20 compatible channels
- easy freqency setup for up to 12 receiver via link-function with RJ10 connection
- audio frequency range 25 - 18.000 Hz
- infra red data and frequency transmission
- handheld transmitter with charging contacts for optional BA 2015 (NiMH) rechargeable battery pack
- pilottone
- autotune to find free frequencies
- internal EQ
- 60dB Audio Gain, Soundcheck-Mode
- 4-segment battery level on transmitter and receiver
- HDX-Compander
- frequency range B-Band 626 - 668 MHz
- LCD display with NF and channel
- 30mW transmitted power
- 2 BNC antenna connectors
- XLR-male balanced and jack unbalanced out
- external powersupply 10,5 - 16 V DC
- incl. GA 3 rackmount
- J10 cable
- powersupply NT2 and 2x AA-batteries
|
Make your presentations come to life. The included omni-directional microphone provides natural speech reproduction while remaining inconspicuously small. The bodypack transmitter has a rechargeable battery option so you can concentrate on your presentation - not on purchasing batteries. Demand the best in wireless presentation technology with quick setup, user-friendly operation, and absolute reliability due to the true diversity receiver. Now featuring wireless infrared transmitter sync for easy setup.
Sturdy metal housing (transmitter and receiver 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception Enhanced frequency bank system with up to 12 compatible frequencies High-quality true diversity reception Pilot tone squelch for eliminating RF interference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency range Increased range for audio sensitivity Wireless synchronization of transmitters via infrared interface User-friendly menu operation with more control options Illuminated graphic display (transmitter and receiver) Auto-Lock function avoids accidental changing of settings HDX compander for crystal-clear sound Transmitter feature battery indicatation in 4 steps, also shown on receiver display Programmable Mute function Integrated Equalizer and Soundcheck mode Contacts for recharging BA 2015 accupack directly in the transmitter Wide range of accessories adapts the system to any requirement
|
Reviews
There are no reviews yet.