Content |
System Includes WA302 | Cable, Instrument, 2.5 foot (.75 m), 4 Pin Mini Connector (TA4F) to 1/4-inch Connector. | BLX1 | Up to 14 hours of continuous use with 2 AA batteries. 300 ft (100 m) transmission radius. | BLX4 | Single channel wireless receiver with microprocessor-controlled internal antenna diversity. |
Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it's the most accessible way to own the stage.
Includes BLX1 bodypack transmitter, BLX4 single-channel receiver, guitar cable, power supply, 2 AA batteries, and user guide.
|
VWTTM
Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.
Superior specs.
Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)
Cable tone simulation.
Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.
Compander free.
Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.
| Polycarbonate Stompbox-style System | Transmission Format | Line 6 proprietary digital audio transmission | Frequency Response | 10Hz - 20kHz | Dynamic Range | 118 dB | RF Carrier Frequency | 2.4GHz | Operating modes | RF1 | Compatible Channels | 6 | Transmission Range | 100 feet line-of-sight (may vary due to local conditions) | FCC Approval | Part 15 approved, no user-license required |
|
- EIA-standard half 19” metal case.
- Front panel includes ACT sync button, rotary control knob for menu settings and dual audio LED indicators.
- LCD screen displays group & channel, encryption status, RF output, stereo/mono mode.
- Lockable front panel.
- PLL-synthesized technology enables multiple preset compatible channels.
- 64MHz bandwidth.
- 112 dBA S/N ratio.
- Balanced and unbalanced audio inputs.
- Switchable Line & Microphone, adjustable sensitivity levels and up to +26 dBU maximum SPL.
- Built-in 3 bands EQ settings.
- Selectable encryption keys.
- Scan for an open, interference-free frequency.
- 6.3mm headphone monitoring jack.
- RJ-11 MIPRO ACT-BUS connector.
- Up to 100mW output power. selectable Hi, Low or Off setting.
- TNC 50Ω RF output & input connectors.
Frequency Range
|
470~664 MHz, 672~960 MHz (country dependent)
|
Bandwidth
|
64 MHz
|
Oscillation Mode
|
PLL-Synthesized
|
Channel Grid
|
25 kHz
|
Frequency Stability
|
±0.005% (-10~+60℃)
|
Modulation Mode
|
Digital Modulation
|
Output Power
|
10 ~ 100 mW (country dependent)
|
Spurious Rejection
|
|
Frequency Response
|
20 Hz ~ 15 kHz (Stereo)
|
T.H.D.
|
|
ADC Dynamic Range
|
112 dBA
|
Stereo Audio Input
|
Phone 6.3 mm Ø ×2, XLR, 6.3 mm Ø Combo Jack
|
Max. SPL
|
> +26 dBu, Selectable Line and Microphone level
|
Audio input adjustment
|
0 ~ -30 dB, 3 dB step
|
Headphone Monitor
|
6.3 mm Ø Stereo Jack with volume control
|
Impedance
|
≧ 16 Ω
|
Network Interface
|
RJ-11 × 2, proprietary MIPRO ACT-BUS
|
Antenna Connector
|
TNC (50 Ω impedance)
|
Power Supply
|
DC 12~15V
|
Dimensions (W × H × D)
|
210 × 44 × 206 mm (8.3 × 1.7 × 8.1“)
|
Weight
|
Approx. 1.1 kg ( 2.4 lbs)
|
Note
|
Refer to actual product in the event of product description discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.
|
| A lightweight, low-profile wireless system that provides guitarists with 200 feet of freedom.
The Line 6 Relay G50 Digital Wireless System provides a pure signal with a clarity that rivals that of the highest-quality guitar cables. Guitars get a beautiful high-end sparkle and basses get a thunderous low-end punch, even at distances of up to 200 feet. Traditional wireless systems compromise the sound of your instrument by rolling-off crucial high- and low-end frequencies and compressing their signals. This system on the other hand, offers superior sound with full bandwidth and zero compression.
Professional Dependability
Broadcasting over the 2.4GHz band keeps the Line 6 Relay G50's signal free from many kinds of interference. Traditional wireless guitar systems are susceptible to dropouts, static, and many other kinds of interference. Broadcasting over congested UHF bands, their signals may be affected by interference generated as far away as 100 miles or more. For added security, the Relay G50 employs exclusive signal protection technology, simultaneously broadcasting encrypted data streams to multiple antennas.
Refreshing Simplicity
The Relay G50 is a low-profile wireless system that's easy to use. The lightweight transmitter remains out of the way of your performance and its LCD displays channel number and battery life. The rugged metal receiver offers bright and easy-to-read LEDs that display power, status, and battery life. Its dual 1/4" outputs make it an easy addition to your pedal board.
Attached to Your Guitar Cable?
For players attached to cables, adopting a wireless system introduces many questions: What will it feel like? Will it change my sound? The Line 6 Relay G50 sounds just like a cable, but it also sounds just like your cable. It features EQ settings that match the frequency responses of typical guitar cables. Different players use different cables, but all players can use Relay G50.
The Wireless Revolution
Relay G50 is proudly ushering in a better-sounding and more dependable era of wireless guitar systems. It will inspire you to explore new areas of your music and the stage.
The wireless guitar system comes complete with transmitter, receiver and all necessary accessories including locking cable, power supply, and batteries.
Features
200-foot range, line-of-sight
Broad 10Hz - 20kHz frequency response; Superior 120dB dynamic range; 24-bit digital conversion
8 hours of battery life (AA alkaline batteries)
Lightweight, low-profile and easy to use
Bright LEDs and LCD show power, status, and battery life
EQ presets match Relay G50 to the sound of your guitar cable
Comes complete with transmitter, receiver and all necessary accessories including locking cable, power supply and batteries
2.4GHz band is optimal for guitar wireless, FCC/DTV compliant
Multiple layers of signal protection; Encrypted data stream; Simultaneous broadcasts on multiple channels |
AKG WMS 470 Wireless Instrument Set has an automatic frequency setup function that immediately finds and displays all available channels. WMS470 by AKG operates up to 16 channels simultaneously within the same frequency band and up to 48 channels by using multiple frequency bands. AKG WMS 470 wireless system includes an AKG PT470 transmitter, AKG SR470 receiver and an MKG L instrument cable. WMS470 instrument set incorporates handheld, headworn and lavalier mic options. | The WMS 40 Mini Instrumental Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini receiver provides three status LEDs indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. The supplied switched mode power supply operates on any AC voltage from 110 to 240 VAC and includes EU, UK, and US adapters.
The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR output allows you to connect every compatible AKG miniature microphone. Battery life of the transmitter is the same legendary "30 hours off a single AA battery" as for the WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI receiver, a PT 40 MINI pocket transmitter, a MKG L instrument cable, a universal power supply with US/UK/EU adapter, and one AA size dry battery.
User's Manual |
Reviews
There are no reviews yet.