Shure P2R – Q3Wireless Bodypack Receiver for PSM-200

Discontinued

90.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Shure P2R -Q3 Wireless Bodypack Receiver for PSM-200 FREQUENCY 748,000 – 784.000 MHz CH1: 749.100     CH5: 772.000 CH2: 754.025     CH6: 775.000 CH3: 756.000     CH7: 778.775 CH4: 765.900     CH8: 781.900 The P2R Hybrid Bodypack Receiver is the world’s first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. […]

 

Read more

Shure P2R -Q3 Wireless Bodypack Receiver for PSM-200

FREQUENCY 748,000 – 784.000 MHz

CH1: 749.100     CH5: 772.000

CH2: 754.025     CH6: 775.000

CH3: 756.000     CH7: 778.775

CH4: 765.900     CH8: 781.900

The P2R Hybrid Bodypack Receiver is the world’s first bodypack receiver to function as a
wired receiver, a wireless receiver, or both at the same time. This and other
unique features, along with excellent sound quality, make the P2R an exceptional value.

Key Features:

Can operate as a wired or wireless bodypack, or both simulaneously
Frequency locator
Built-in headphone limiter
Integrated cable management
High-impact plastic chassis
1/4″ Line inpit jack with high/low gain switch

Operating Controls:

Volume knob
Frequency select

LED Indicators:

Power
RF reception
Frequency
Limiter
Low Battery

RF Sensitivity
­109 dBm typical
Squelch Threshold
­102 dBm typical
Antenna
Attached Whip
Audio Input Connector
Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = ­10 dBu
Frequency Response: 30 Hz to 20 kHz (+/­3 dB); earphone dependent
Power Requirements
9 V alkaline battery, Duracell? type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedance
8 ohms
Net Weight
100 g (3.52 oz.), less battery
Overall Dimensions
122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Shure P2R – Q3Wireless Bodypack Receiver for PSM-200”

Your email address will not be published. Required fields are marked *

Quick Comparison

Shure P2R - Q3Wireless Bodypack Receiver for PSM-200 removeLD Systems LDMEI1000G2BPR receiver for MEI1000G2 IN-EAR Wireless Monitoring system removeAudio Technica ATW-1501 System 10 Digital 2.4 GHz Stompbox wireless system removeAudio Technica AEW-T1000a UHF UniPak™ transmitter removeSENNHEISER Receiver EK-2000-BW-X removeAudio Technica ATW-T310b UniPak® transmitter remove
NameShure P2R - Q3Wireless Bodypack Receiver for PSM-200 removeLD Systems LDMEI1000G2BPR receiver for MEI1000G2 IN-EAR Wireless Monitoring system removeAudio Technica ATW-1501 System 10 Digital 2.4 GHz Stompbox wireless system removeAudio Technica AEW-T1000a UHF UniPak™ transmitter removeSENNHEISER Receiver EK-2000-BW-X removeAudio Technica ATW-T310b UniPak® transmitter remove
Image
SKUP2RLDMEI1000G2BPRATW-1501AEW-T1000aH99SE00248ATW-T310b
Rating
Price 90.00 incl. GR VAT 227.65 incl. GR VAT 379.85 incl. GR VAT 460.56 incl. GR VAT 969.00 incl. GR VAT 298.25 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

In stock

In stock

Available on backorder

In stock

AvailabilityOut of stockOnly 1 left in stock (can be backordered)In stockIn stockAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentShure P2R -Q3 Wireless Bodypack Receiver for PSM-200 FREQUENCY 748,000 - 784.000 MHz CH1: 749.100     CH5: 772.000 CH2: 754.025     CH6: 775.000 CH3: 756.000     CH7: 778.775 CH4: 765.900     CH8: 781.900 The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value. Key Features: Can operate as a wired or wireless bodypack, or both simulaneously Frequency locator Built-in headphone limiter Integrated cable management High-impact plastic chassis 1/4" Line inpit jack with high/low gain switch Operating Controls: Volume knob Frequency select LED Indicators: Power RF reception Frequency Limiter Low Battery RF Sensitivity ­109 dBm typical Squelch Threshold ­102 dBm typical Antenna Attached Whip Audio Input Connector Connector Type: 1/4-inch Mono Impedance: 1 megohm Maximum Input Level: LO = +0 dBu; HI = ­10 dBu Frequency Response: 30 Hz to 20 kHz (+/­3 dB); earphone dependent Power Requirements 9 V alkaline battery, Duracell? type MN1604 recommended Battery Life Volume Dependent Wired (RF Off): 6 hours Wireless (RF On): 4 hours Audio Output Connector 1/8 inch (3.5 mm) Minimum Load Impedance 8 ohms Net Weight 100 g (3.52 oz.), less battery Overall Dimensions 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)Battery disposal information [77,1 KB] LD Systems MEI1000G2 The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands. Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously. * license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
  • Model name: LDMEI1000G2BPR
  • Product type: Belt pack receiver
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • Frequency response: 60 Hz - 16 kHz
  • S/N ratio: 80 dB
  • THD:
  • Audio outputs: 3.5 mm jack
  • Max. audio output level: 100 mW
  • Controls: Up, Down, Escape, Set, Volume
  • Indicators: LC Display, Low Battery, Power
  • Power supply: 2 x 1.5 V AA
  • Operating time: > 13 hrs., battery-dependent
  • Width: 65 mm
  • Height: 90 mm
  • Depth: 24 mm

Audio-Technicaʼs System 10 Stompbox digital high-fidelity guitar wireless system combines the advanced 24-bit operation, easy setup and clear, natural sound quality of other System 10 configurations with unique functionality for guitarists, bassists and other instrumentalists. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 Stompbox offers a rugged, metal, pedal board-mountable receiver with foot switch, two switched TRS balanced 1/4" outputs and an output mode selector. With the tap of a foot, musicians can toggle between outputs (e.g., for switching amps) or mute and unmute one output without muting the other (e.g., for convenient tuning). And a single receiver can be paired with up to eight UniPak® body-pack transmitters, allowing users to easily switch between instruments without having to move a body-pack from one instrument to the next.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Each Stompbox system includes an ATW-R1500 Stompbox receiver, an ATW-T1001 UniPak body-pack transmitter with an AT-GcW guitar cable, and hook & loop strips for adding receiver to an effects pedal board. The ATW-R1500 is a digital receiver with sturdy, metal-body construction, easy-to-read digital ID and transmitter battery level displays, and AF Peak and Pair indicator lights.

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • 2.4 GHz range – completely free from TV interference
  • Three levels of diversity assurance: frequency, time, & space
  • Two switched TRS balanced 1/4" output jacks
  • Output mode selector and foot switch to toggle between outputs or mute/unmute Output A without muting Output B (e.g., for use with tuner)
  • Multi-pairing function to link a single receiver with up to eight body-pack transmitters
  • Transmitter battery level display on receiver
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and setup
  • State-of-the-art digital receiver housed in a strong, metal, stompbox-style body for reliable performance and pedal board mounting
  • Included hook & loop strips for adding receiver to effects pedal board
  • Universal (center + or -) 9v–12v DC input

 

OVERALL SYSTEM SPECIFICATIONS
  • Operating Frequencies: 2.4 GHz ISM band
  • Dynamic Range: >109 dB (A-weighted), typical
  • Total Harmonic Distortion: 7 hours (alkaline)
  • Depending on battery type and use pattern
  • Dimensions: 70.2 mm (2.76“) W x 107.0 mm (4.21“) H x 24.9 mm (0.98“) D
  • Net Weight: 100 grams (3.5 oz) without batteries
  • Accessory Included: AT-GcW Guitar Input Cable
  •  

    Compatible with the Wireless Essentials® range. Rugged, ergonomic metal housing. Includes field-replaceable helical and flexible-whip antennas. Three-position sliding cover limits access to controls as desired: full access, Power/Mute button only, or no access. Two position mounting clip. For use with AEW-T1000a and all Audio-Technica UniPak™ Wireless Transmitters.

    The AEW-T1000a wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a DC bias connection allowing it to be used with both condenser and dynamic microphones. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. A dual-colour power/mute indicator LED provides visual indication of transmitter status. The transmitter operates using two standard AA batteries and features high- and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently, including battery level remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of transmitterʼs power/mute button as desired for particular users and applications. Four nameable user presets allow for storage and recall of commonly used settings. To match the audio input level to the transmitter, a ten-position audio input gain setting selected through the function menu is provided. The body-pack features a safety cover to protect the soft-touch controls from being accidently activated and a recessed input connector to increase the life of the microphone cable. Inputs are available on the UniPak® for low impedance microphone and high impedance musical instrument or line input. Constructed of metal, the body-pack transmitter features a field replaceable antenna, captive locking battery cover door, a short rigid helical antenna and a flexible wire antenna.

    • Available in the following frequency bands:
      541.500 - 566.375 MHz (C Band)
      655.500 - 680.375 MHz (D Band)
      721.500 - 746.375 MHz (G Band)
    • 25 kHz frequency spacing makes it easier to find a clear, open
    • frequency in crowded RF environments
    • Dual RF power output selection to optimize battery life
    • Digital Tone Lock™ squelch that communicates transmitter data
    • to the receiver
    • Function menu displayed in a backlit LCD window, controlled by
    • internal soft-touch controls
    • High efficiency dual companding system for flawless audio
    • Four nameable user presets
    • Battery fuel gauge on LCD readout
    • Recessed microphone input connector
    • Power/mute lock provision as well as safety door to cover controls
    • Dual-colour power/mute status indictor
    • Microphone or line input with DC bias voltage
    • 18 dB audio input level adjustment
    • Operates on two AA batteries
    • Captive locking battery compartment door
    • Adjustable squelch
    • Rugged metal housing with a reversible clothing clip
    • RF Power Output: High: 35 mW; Low: 10 mW, nominal
    • Spurious Emissions: According to National Regulations
    • Microphone Dynamic Range: >=110 dB, A-weighted
    • Instrument Dynamic Range: >=110 dB, A-weighted
    • Input Connections: High impedance, low impedance, bias
    • Batteries: Two 1.5V AA alkaline (not included)
    • Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
    • Dimensions: 66.0mm W x 87mm H x 24mm; not including antenna
    • Net Weight: 125 g

    It is nice when you can concentrate fully on the picture because you know the sound is reliable. This camera receiver allows you to do just that. Equipped with adaptive diversity, the camera receiver ensures reliable reception. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for components of the 2000 series. The transmitter settings can be synchronized quickly from EK 2000 using infrared technology.

    The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided.

    The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.

     

    • RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
    • Spurious Emissions: Following federal and national regulations
    • Input Connection: Four-pin Locking Connector
      Pin 1: GND, Pin 2: INST INPUT,
      Pin 3: MIC INPUT, Pin 4: DC BIAS +5V
    • Batteries: Two 1.5V AA, not included
    • Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline)
      Depending on battery type and use pattern.
    • Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm H
    • Net Weight: 81 g without batteries

     

    Weight0.10 kg0.33 kg0.10 kg0.10 kg0.50 kg0.10 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.10 kg
    Weight 0.33 kg
    Weight 0.10 kg
    Weight 0.10 kg
    Weight 0.50 kg
    Weight 0.10 kg