Shure DFR11EQE4 Digital Audio Processor with Equalizer, Limiter, Delay

Discontinued

375.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Shure’s DFR11EQ is a computer-controlled digital equalizer with a multitude of audio processing capabilities offered in a compact, half-rack unit. The innovative DFR software interface runs on Windows® and makes even the most complex processing functions easy to use.   The DFR11EQ Solves a Variety of Problems:     Non-ideal acoustics     Insufficient gain before feedback […]

 

Read more

Shure’s DFR11EQ is a computer-controlled digital equalizer with a multitude of audio processing capabilities offered in a compact, half-rack unit. The innovative DFR software interface runs on Windows® and makes even the most complex processing functions easy to use.
 
The DFR11EQ Solves a Variety of Problems:

    Non-ideal acoustics
    Insufficient gain before feedback
    Irregular sound system frequency response
    Harmful signal peaks that can damage amplifiers and loudspeakers

 
 
Features:

    EQ – Selectable 10 bands of Parametric EQ or 1/3 Octave Graphic EQ
    Feedback Reduction – 10 precision notch filters that automatically seek out and reduce feedback
    Scene Presets -10 onboard scene presets, 3 accessible from the front panel. All onboard presets can also be accessed with the DRS-10 Digital Remote Switch accessory.
    Limiter and Delay
    Remote Modem Access, SIA-Smaart® Pro Interface, and Alternatives to Direct PC Control

Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “Shure DFR11EQE4 Digital Audio Processor with Equalizer, Limiter, Delay”

Your email address will not be published. Required fields are marked *

Quick Comparison

Shure DFR11EQE4 Digital Audio Processor with Equalizer, Limiter, Delay removeDBX 510 SUBHARMONIC SYNTHESIZER MODULE removeDBX PMC16 Personal monitor controller removeSirus Stereo Link 5.8 RX Wireless Digital Audio Receiver removeBehringer MULTIGATE PRO XR4400 Quad Expander/Gate removeBSS BLU DAN Digital network processor remove
NameShure DFR11EQE4 Digital Audio Processor with Equalizer, Limiter, Delay removeDBX 510 SUBHARMONIC SYNTHESIZER MODULE removeDBX PMC16 Personal monitor controller removeSirus Stereo Link 5.8 RX Wireless Digital Audio Receiver removeBehringer MULTIGATE PRO XR4400 Quad Expander/Gate removeBSS BLU DAN Digital network processor remove
ImageSirus_Stereo_Link_5_8_rX_Wireless_Digital_Audio_Receiver_face_1bss blu dan bridge dante
SKUDFR11EQE4DBX 510DBX PMC16SI58RXE005394Z-BLU DAN
Rating
Price 375.00 incl. GR VAT 251.00 incl. GR VAT 882.00 incl. GR VAT 79.90 incl. GR VAT 145.00 incl. GR VAT 1,165.59
Stock

Out of stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Only 5 left in stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)In stockOnly 5 left in stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
Shure's DFR11EQ is a computer-controlled digital equalizer with a multitude of audio processing capabilities offered in a compact, half-rack unit. The innovative DFR software interface runs on Windows® and makes even the most complex processing functions easy to use.
 
The DFR11EQ Solves a Variety of Problems:

    Non-ideal acoustics
    Insufficient gain before feedback
    Irregular sound system frequency response
    Harmful signal peaks that can damage amplifiers and loudspeakers

 
 
Features:

    EQ - Selectable 10 bands of Parametric EQ or 1/3 Octave Graphic EQ
    Feedback Reduction - 10 precision notch filters that automatically seek out and reduce feedback
    Scene Presets -10 onboard scene presets, 3 accessible from the front panel. All onboard presets can also be accessed with the DRS-10 Digital Remote Switch accessory.
    Limiter and Delay
    Remote Modem Access, SIA-Smaart® Pro Interface, and Alternatives to Direct PC Control


For decades, dbx’s patented Subharmonic Synthesis has rattled foundations enhancing the bass in a variety of professional applications including nightclub and DJ mixing, theatre and film sound, music recording, live music performance and broadcasting. dbx’s Subharmonic Synthesis process actually produces a new, Waveform Modeled bass note, exactly an octave below the bass in the original audio.

The dbx 510 answers the call of audio professionals everywhere delivering Subharmonic Synthesis in the convenient design of a 500 Series module. The 510’s two separate bands of subharmonic synthesis provide the best combination of smoothness and control, while the independent Low Frequency Boost circuit is designed to get the most out of high-performance, low frequency speaker systems. Unlike other attempts at bass synthesis, the dbx process produces musical low frequencies that don’t interfere with mid and high-band information, even when the maximum synthesis and boost are applied. The result is a low-end punch that people really feel!

Put some boom in your room with the dbx 510!

Overview Dial in YOUR mix exactly as YOU want it, in Real Time.

The PMC16 is a 16 channel personal monitor controller which allows the user to create a custom mix from 16 channels of audio. Designed to be used with the dbx TR1616 or any other BLU link compatible device, the PMC16 allows for monitoring with headphones, in-ear monitors, powered monitors, or traditional wedge monitors. Multiple PMC16s can be daisy chained using CAT5e cable allowing each user to receive 16 channels of high-resolution digital audio and create their own personalized mix to suit their monitoring needs. The PMC16 comprises a 16 channel mixer section with full control of levels, panning, effect send levels, muting, and soloing. Onboard Lexicon© reverb provides the finishing touch. The PMC16ʼs output processing section includes: stereo width control, wedge monitor compensation EQ, high and low master EQ, master level control, and dbx limiting. With a Setup Wizard for ease of configuration, full 16 channel level metering, channel grouping, 16 preset locations for future recall of configurations and mixes, and an intuitive yet powerful user interface, PMC16 gives you the power to dial in YOUR mix exactly as YOU want it, in real time.

Recommended for: Portable, Tour.

Features
  • 16 Channel Monitor Mixer with Level, Pan, Mute, Solo, & Reverb Send Control
  • 16 Preset Locations for Mix & Configuration Recall
  • LCD Display with 16 Channel Metering
  • Built-In Lexicon© Reverb
  • dbx PeakStopPlus™ Limiting
  • Global High & Low EQ
  • Global Master Level Control
  • Global Stereo Width Control
  • BLU Link High Bandwidth, Fault Tolerant Digital Audio Bus
  • XLR & 1/4” Stereo or Mono Outputs
  • 1/8” & 1/4” Headphone Outputs
  • Setup Wizard for Easy Configuration
  • Supports 48 kHz & 96 kHz Sampling Rates
  • Channel Linking, Grouping, & Multi-Select Capabilities
  • Supports up to 60 PMC16s on a Single BLU Link Ring
  • Built-In Sturdy Mic Stand Mount
  • USB Port for Firmware Updates

Wireless 5.8 GHz Stereo Receiver

  • For wireless transmission of a stereo audio signal together with the
  • Maximum range: 30 m
  • One transmitter can be paired with up to 8 receivers
  • Outputs: 2x XLR male or 2x 6.3 mm jack (unbalanced)
  • Volume control
  • Dimensions without antenna (L x W x H ): 110 x 105 x 45 mm
  • Includes external power supply DC 12 V / 1 A (plus inside) and mounting bracket

The MULTIGATE PRO XR4400 provides four frequency-selective expanders/noise gates in a single rack space. Each section comprises an ultra-fast gate, a program dependent expander, a filter section and precision meters indicating both threshold point and gain reduction.

The included side chain parametric filters allow the user to fine-tune control signals so that the gate reacts only when required. The Interactive Attack Control (IAC) circuit analyzes the program material to calculate the attack time of the gate. Separate hold and release controls offer additional flexibility. The XR4400 has a switchable operating mode for the gate and expander. With the MODE function off, the unit works in gate mode using an extremely fast attack time, thus preserving the transient details of the program material. In expander mode, the device analyzes the shape and dynamic contents of the input signal to calculate the control time parameters. The result is that vocals, instruments and complex mix signals can be cleaned up without audible clicks or other detrimental effects.

A couple function on the XR4400 provides a great deal of flexibility to link the expander/gate sections in a master/slave configuration.

Quadruple expander/gateHigh-precision parametric filter for frequency selective operationFully adjustable Ratio control in Expander modeFully adjustable Attenuation control in Gate modeIndependent Hold/Release controls for any envelope shapingFlexLink system for flexible Master/Slave configurationsExtremely low-noise operational amplifiers and high-grade VCA\'sFilter Monitor facility for monitoring the filter sectionHigh-quality detent potentiometers and backlit switchesServo-balanced gold-plated XLR and 1/4" TRS inputs and outputs8-digit LED meters for input level, output level and gain reduction monitoring

Function Four channel expander/gate
Number of Channels 4
Inputs 4 x XLR, 4 x TRS 1/4" phone
Output 4 x XLR, 4 x TRS 1/4" phone
Maximum Input Level +21dBu
Compression Threshold Not applicable
Compression Ratio Not applicable
Attack Time Not applicable
Release Time Not applicable
Gate Threshold 0 to -80dB
Gate Rate Attack: Program dependant
Hold: 0 to 4 sec, variable
Release: 50ms to 4 sec, variable
Maximum Output Level +21dBu
Make-up Gain Not specified by manufacturer
Frequency Response 18HZ to 30kHz
Dynamic Range Not specified by manufacturer
Noise >95dBu, unweighted, 22Hz to 22kHz
Dimensions 1U rack mount, 8 1/2" deep
Specialties Unit will operate at either +4dB or -10 dB
The Soundweb London BLU-DAN offers Dante audio and BLU link. This means that the BLU-DAN can be used to ‘add’ Dante to one or more BLU link devices. The BLU-DAN is configurable through HiQnet Audio Architect. A rich palette of logic objects and a "drag and drop" method of configuration provide a simple and familiar design environment. The BLU-DAN features Dante audio. The BLU-DAN is capable of simultaneously transmitting and receiving up to 64 channels of Dante audio (64 x 64). Primary and Secondary ports are provided for fault tolerance. Control is through a separate Ethernet port. The BLU-DAN also features BLU link, a low latency, fault tolerant digital audio bus of 256 channels, which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. A bi-directional locate function allows devices to be identified both from and within HiQnet Audio Architect. The BLU-DAN and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Features

  • AES67 and Dante Audio with support for Dante Domain Manager
  • BLU link – 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
  • ‘Add’ Dante / AES67 to one or more BLU link devices
  • Clear Front Panel LED Indication
  • Bi-Directional Locate Functionality
  • HiQnet Device
  • Configuration, Control and Monitoring from HiQnet Audio Architect
  • 1RU, Half-Rack Device
  • AES67 Compatible
  • EN 54-16 Compliant for life safety applications
*The price is without VAT
Weight3.00 kg1.00 kg2.00 kg1.000 kg3.20 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 1.00 kg
Weight 2.00 kg
Weight 1.000 kg
Weight 3.20 kg
Weight 2.00 kg