SHURE MX153 /O Condenser Omni Headset Microphone

ansducer Type
Electret condenser

Polar Pattern
Omnidirectional

Frequency Response
20 to 20,000 Hz

Output Impedance
N / A

Sensitivity (open circuit voltage, @ 1 kHz, typical)
-41 dBV/Pa (9 mV)

Maximum SPL (1 kHz at 1% THD)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL

Signal-To-Noise Ratio
60 dB

Dynamic Range @ 1 kHz
2500 Ω load: 73 dB
1000 Ω load: 73 dB

Self-Noise (equivalent SPL, A-weighted, typical)
34 dB

Operating Temperature Range
-18°C (0°F) to 57°C (135°F)

Polarity
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1

Power Requirements
+5 V DC (130 μA minimum)

Weight
19.76 g

Transducer     Condenser
Polar Pattern     Omnidirectional
Frequency Response     30Hz to 20kHz +/- 3dB
Dynamic Range (Typical)     Not Specified by Manufacturer
Signal-to-Noise Ratio     Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level     130dB SPL
Power Requirements     Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance     2k ohms
Output Connectors     TA4-Female Connector for Shure Wireless Transmitters
Dimensions     Not Specified by Manufacturer
Weight     0.07 oz (2g)

The AKG C520L is a head-worn condenser microphone with maximum dynamic range for perfect vocal sound.

The AKG C520L can be used with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.

The AKG C520L is an ideal choice for frontmen, singing keyboardists, drummers, guitarists, and dancers. The microphone arm mounts either on the left or right side of the headband as desired. Its cardioid polar pattern effectively rejects unwanted ambient noise. The C 520 provides the perfect solution for any performer needing a handsfree microphone.

A transducer shock mount reduces handling noise to a minimum. The moisture shield prevents perspiration from penetrating into the transducer element, ensuring a high degree of humidity protection for the microphone.

AKG C520L main features include:

• Head-worn microphone with continuously adjustable behind-the-neck headband
• External shock mount for high mechanical-noise rejection
• Miniature gooseneck for precise positioning near the user's mouth
• Microphone arm provides choice of left or right-hand use
• Polar pattern: cardioid
• Frequency range: 60 Hz to 20 kHz
• Sensitivity: 5 mV/Pa (-46 dBV)
• Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
• Equivalent noise level: 31 dB-A
• Impedance: = 2000 ohms
• Connector:3-pin mini XLR
• Cable: C 520 L: 1.5 m (5 ft.)
• Finish: matte black
• Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
• Net weight: 26 g (0.9 oz.)

Transducer     Condenser
Polar Pattern     Omnidirectional
Frequency Response     30Hz to 20kHz +/- 3dB
Dynamic Range (Typical)     Not Specified by Manufacturer
Signal-to-Noise Ratio     Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level     130dB SPL
Power Requirements     Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance     2k ohms
Output Connectors     TA4-Female Connector for Shure Wireless Transmitters
Dimensions     Not Specified by Manufacturer
Weight     0.07 oz (2g)

Features:

    Smallest, lightest, most comfortable microphone of its kind
    User-friendly for new and experienced users alike
    Excellent for singing and spoken word applications
    Extremely popular in houses of worship, theater and broadcast settings
    Almost invisible against many skin tones
    Rugged, bendable boom assures a custom fit for every wearer
    Hands-free, wireless-enabled microphone allows total freedom of movement
    Exclusive snap-on cables in 1mm or 2mm diameter for field replacement or compatibility with various wireless systems
    Highly resistant to sweat and moisture
    High quality voice pickup - more consistent than any lavalier
    Excellent rejection of surrounding noise
    Reduces feedback in meeting rooms or houses of worship an average of 12dB compared to an omni lavalier
    Omnidirectional microphone is virtually immune to wind and breath pops, even without a windscreen

The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.

Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.

The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.

The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.

Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.

Included Accessories

• pop filter,
• clip,
• tool kit,
• anti trauma case,
• mini furry,
• micon cable