Shure MX202B/O Microflex Overhead Microphones

242.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: MX202B/O Category:
t is hard to believe that such small, unobtrusive microphones can produce such great sound, but it’s true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex® Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser […]

 

Read more

t is hard to believe that such small, unobtrusive microphones can produce such great sound, but it’s true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex® Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Cartridge polar pattern indicated by model number suffix:
C = Cardioid, S = Supercardioid, N = No cartridge

Available Options
    MX202B/C     Black mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
    MX202B/S     Black mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/C     White mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/S     White mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/N     White mini-condenser mic, w/cable, in-line preamp, stand adapter, No Cartridge
    MX202BP/C     Black mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier
    MX202BP/S     Black mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier
    MX202BP/N     Black mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge
    MX202WP/C     White mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier.
    MX202WP/S     White mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier.
    MX202WP/N     White mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge

Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “Shure MX202B/O Microflex Overhead Microphones”

Your email address will not be published. Required fields are marked *

Quick Comparison

Shure MX202B/O Microflex Overhead Microphones removeShure MX202B/C Microflex Overhead Microphones removeINTER-M RM-01 Remote Microphone removeSHURE SM 58LCE - Vocal Microphone 50Hz to 15kHz removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz removePROEL BMG-2 Microphone Base remove
NameShure MX202B/O Microflex Overhead Microphones removeShure MX202B/C Microflex Overhead Microphones removeINTER-M RM-01 Remote Microphone removeSHURE SM 58LCE - Vocal Microphone 50Hz to 15kHz removeSHURE KSM-137SL - Cardioid Instrument Microphone 20Hz to 20kHz removePROEL BMG-2 Microphone Base remove
Image
SKUMX202B/OMX202B/CRM-01SM58LCEKSM137/SLH06PR00147
Rating
Price 242.00 incl. GR VAT 333.12 incl. GR VAT 129.00 incl. GR VAT 122.00 incl. GR VAT 396.80 incl. GR VAT 70.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

Available on backorder

Only 1 left in stock

AvailabilityIn stockIn stockIn stockIn stockAvailable on backorderOnly 1 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

t is hard to believe that such small, unobtrusive microphones can produce such great sound, but it's true. Available in black or white finishes, and with in-line or plate mount preamps, MX202 Microflex® Overhead condenser microphones capture high-quality sound in a compact, adjustable package. Each model features a choice of interchangeable cardioid or supercardioid condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.

Cartridge polar pattern indicated by model number suffix:
C = Cardioid, S = Supercardioid, N = No cartridge

Available Options
    MX202B/C     Black mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
    MX202B/S     Black mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/C     White mini-condenser Cardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/S     White mini-condenser Supercardioid mic, w/cable, in-line preamp, stand adapter
    MX202W/N     White mini-condenser mic, w/cable, in-line preamp, stand adapter, No Cartridge
    MX202BP/C     Black mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier
    MX202BP/S     Black mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier
    MX202BP/N     Black mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge
    MX202WP/C     White mini-condenser Cardioid mic; includes cable and plate-mounted preamplifier.
    MX202WP/S     White mini-condenser Supercardioid mic; includes cable and plate-mounted preamplifier.
    MX202WP/N     White mini-condenser mic; includes cable and plate-mounted preamplifier, No Cartridge

Shure MX202B-C Microflex Overhead Cardioid Condencer Microphone

It is hard to believe that such small, unobtrusive microphones can produce such great sound,
but it's true. Available in black or white finishes, and with in line or plate mount preamps, the
Microflex? Overhead condenser microphones capture Shure quality sound in a compact, adjustable
package. Each model features a choice of interchangeable cardioid, supercardioid and omnidirectional
condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.
The preamp options available offer easy installation in ceilings or microphone stands, and when combined
with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound
reproduction with a minimum of RF interference or electromagnetic hum.

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings

Frequency Response
50 to 17,000 Hz
Output Impedance
180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 dBV/Pa (42.2 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range at 1 k ohm load
96.2 dB
100 dB at 0 gain
Common Mode Rejection
45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)
-6.0 dBV (0.5 V)
-12 dBV at 0 gain
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements
11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%
  • Unidirectional Dynamic Microphone
  • Remote Chime Switch
  • Mic ON/OFF Switch
  • 2 Push Buttons for Easy Operation
 

 

RM-01
Input Sensitivity / Impedance 75dB±3dB (0dB=1V/µber at 1,000Hz), 600ohm
Frequency Response 100Hz~18kHz
Type Moving Coil Dynamic
Directional Characteristic Unidirectional
Weight 3lbs.
1.4kg
Dimensions 3.5(W) X 1.8(H) X 5.2(D) inches
90(W) x 45(H) x 133(D) mm
*Specifications and design subject to change without notice for improvements.
The legendary Shure vocal mic is tuned to accentuate the warmth and clarity of lead and back-up vocals. Consistently the first choice of performers around the globe. The Shure SM58? is a unidirectional (cardioid) dynamic vocal microphone designed for professional vocal use in live performance, sound reinforcement, and studio recording. A highly effective, built-in, spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The SM58 has a tailored vocal response for a sound which is a world standard. Rugged construction, a proven shock mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently. Outdoors or indoors, singing, speech - the SM58 is the overwhelming choice of professionals.
  • Frequency response tailored for vocals, with brightened midrange and bass rolloff
  • Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
  • Pneumatic shock-mount system cuts down handling noise
  • Effective, built-in spherical wind and pop filter
  • Supplied with break-resistant stand adapter which rotates 180 degrees
  • Lengendary Shure quality, ruggedness and reliability
  • Cardioid (unidirectional) dynamic
  • Frequency response: 50 to 15,000 Hz
Frequency Range 50 Hz to 15 kHz
Impedance 150 Ohms
Sensitivity -57.5 dBV/Pa at 1 kHz

The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features

  • A highly consistent cardioid polar pattern
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
  • Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect

Performance Characteristics

  • Extended frequency response
  • Low self noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference

APPLICATIONS

Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.

  • Acoustic instruments -- such as piano, guitar, drums, percussion, strings
  • Wind instruments -- brass and woodwind
  • Low frequency instruments -- such as double bass, electric bass, kick drum
  • Overhead miking -- drums or percussion
  • Ensembles -- choral or orchestral
  • Room ambiance pick-up -- guitar amplifier or drums

Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.

Suggested Applications

Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording

Professional table microphone, high sensitivity condenser microphone capsule, flexible gooseneck, illuminated ring to indicate operating condition, and on/off switch. Perfect for all PA applications, such as conference and paging. It can be powered by battery or as by Phantom power. The base is equipped with 8 meters of cable XLRF-XLRM and XLRF-mono jack adapter.

Weight0.20 kg0.20 kg1.40 kg0.50 kg0.50 kg0.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 0.20 kg
Weight 1.40 kg
Weight 0.50 kg
Weight 0.50 kg
Weight 0.70 kg