SHURE M44-7DJ Scratch Spherical turntable head/needle system

372.00 incl. GR VAT

Only 2 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
M44-7 Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ’s worldwide.  Engineered for scratch DJ’s and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances. Combining the Shure unique wide-diameter Type S cantilever […]

 

Read more

M44-7

Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ’s worldwide.  Engineered for scratch DJ’s and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.

  • Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7’s rugged construction is highly durable, but will not unduly wear your vinyl.
  • With a 9.5 mV output, the M44-7 produces powerful, resonant sound.
  • Skip Resistance: ultra high
  • Output: ultra high
  • Record Wear: ultra low
  • Sound Emphasis: big bass

 

Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz

Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z

Made In Mexico

Weight 0.5 kg

Reviews

There are no reviews yet.

Be the first to review “SHURE M44-7DJ Scratch Spherical turntable head/needle system”

Your email address will not be published. Required fields are marked *

Quick Comparison

SHURE M44-7DJ Scratch Spherical turntable head/needle system removeORTOFON 2M Blue CARTRIDGE removeNUMARK CS-1 PROFESSIONAL DJ CARTRIDGE removeORTOFON Concorde Scratch TWIN CARTRIDGE removeORTOFON 2M Black CARTRIDGE removeORTOFON OM Q.Bert CARTRIDGE remove
NameSHURE M44-7DJ Scratch Spherical turntable head/needle system removeORTOFON 2M Blue CARTRIDGE removeNUMARK CS-1 PROFESSIONAL DJ CARTRIDGE removeORTOFON Concorde Scratch TWIN CARTRIDGE removeORTOFON 2M Black CARTRIDGE removeORTOFON OM Q.Bert CARTRIDGE remove
Image
SKUM4472MBLUeH99NU00005ConcordeScratchTWIN2MBlackOMQ.Bert
Rating
Price372.00 incl. GR VAT 208.25 incl. GR VAT 69.00 incl. GR VAT204.00 incl. GR VAT599.00 incl. GR VAT69.00 incl. GR VAT
Stock

Only 2 left in stock

Only 1 left in stock (can be backordered)

Available on backorder

In stock

Available on backorder

In stock

AvailabilityOnly 2 left in stockOnly 1 left in stock (can be backordered)Available on backorderIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentM44-7 Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide.  Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
  • Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
  • With a 9.5 mV output, the M44-7 produces powerful, resonant sound.
  • Skip Resistance: ultra high
  • Output: ultra high
  • Record Wear: ultra low
  • Sound Emphasis: big bass
  Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z Made In Mexico
The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge.  Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Blue uses an improved engine, which provides an increased output of 5.5mV.  
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz 1,5 dB
Channel separation at 1 kHz 25 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 + 2 / - 1 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Nude Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Blue
Cartridge weight  7,2 g
Replacement stylus unit 2M Blue
 
THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE. * Frequency response: 20 to 22,000Hz * Output: 6mV * Channel separation nominal: 32dB * DC resistance: 430 ohms/ch * Inductance: 400mH/ch * Weight: 18.0g * Channel balance: within 1.5dB * Tracking force: 3–6g * Recommended load: 47K ohms 200pf * Stylus tip: fine circular diamond * Application: club and mobile DJs, high output

For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.


This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing

Features:

  • Output Voltage at 1000Hz, 5cm/sec. : 7mV
  • Channel Balance at 1 Khz : 1,5dB
  • Channel Seperation at 1 Khz : 25dB
  • Channel Seperation at 15 Khz : 15dB
  • Frequency Range at 3db : 20-20.000Hz
  • Stylus Type : Spherical
  • Internal Impedance : 750 Ohm
  • Tracking Force recommended : 4,0G(40mN)
  • Cardridge Weight : 18,5 gram
  • Replacement Stylus Unit : Scratch

  • 2M Black - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus – the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear and reduced distortion and phase error as a result of the diamondʼs improved tracking geometry. The cartridge body used for the 2M Black is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. TECHNICAL DATA Output voltage at 1000 Hz, 5cm/sec.5 mV Channel balance at 1 kHz1 dB Channel separation at 1 kHz26 dB Channel separation at 15 kHz15 dB Frequency range at - 3dB20-31.000 Hz Frequency response20-20.000 + 2 / - 0 dB Tracking ability at 315Hz at recommended tracking force80 µm Compliance, dynamic, lateral22 µm/mN Stylus typeNude Shibata Stylus tip radiusr/R 6/50 µm Tracking force range1,4-1,7g (14-17 mN) Tracking force, recommended1,5 g (15 mN) Tracking angle20° Internal impedance, DC resistance1,2 kOhm Internal inductance630 mH Recommended load resistance47 kOhm Recommended load capacitance150-300 pF Cartridge colour, body/stylusBlack/Black Cartridge weight7,2 g Replacement stylus unit2M Black

    Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics.  The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

     

     

    Output voltage at 1000Hz, 5cm/sec.

    11 mV

    Channel balance at 1kHz

    1,5 dB

    Channel separation at 1kHz

    22 dB

    Channel separation at 15 kHz

    -

    Frequency range at -3dB

    20-18.000 Hz

    Frequency response

    20-18.000 Hz - 3 dB

    Tracking ability at 315 Hz at recommmende tracking force

    90 μm

    Compliance, dynamic lateral

    12 μm/m N

    Stylus type

    Spherical

    Stylus tip radius

    R 18 μm

    Tracking force range

    3,0 g (30 mN)

    Tracking force recommended

    4,0 g (40 mN)

    Tracking angle

    20°

    Internal impedance, DC resistance

    1.680 Ohm

    Internal inductance

    920 mH

    Recommended load resistance

    47 kOhm

    Recommended load capacitance

    200-400 pF

    Cartridge weight

    5 g

    Replacement stylus unit

    Q.Bert

     

    Weight0.5 kg0.70 kg0.18 kg0.50 kg0.70 kg0.50 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.5 kg
    Weight 0.70 kg
    Weight 0.18 kg
    Weight 0.50 kg
    Weight 0.70 kg
    Weight 0.50 kg