Shure P4HW Wired Bodypack Personal Monitor

Shure P4HW Wired Bodypack Personal Monitor

P4HW Wired Bodypack

Hardwired Bodypack
Key Features
Attached input cable
High-impact plastic chassis
 
Operating Controls:
 
Operating mode (Stereo, Mono, MixMode)
Volume knob
Balance knob
Defeatable limiter
High-frequency boost
-15 db Pad
 
Backlit LCD Indicators :

Battery life
Input level
Operating mode 

Frequency Response
20 to 20,000 Hz
Total Harmonic Distortion
Channel Separation
35 dB (minimum)
Signal-to-noise ratio
85 dB (minimum)
Maximum Output Level
+5 dBu at 1% THD
Maximum Input Level
+7 dBu, input pad OFF
+22 dBu, input pad ON
Actual Input Impedance
> 40 kilohms
Audio Output Connector
3.5 mm stereo (left=tip, right=ring, ground=sleeve)
Power Requirements
9 V Alkaline battery
Battery Life
Up to 8 hours, volume dependant
Phantom Power Protection
Up to 60 VDC

• Turn Wireless GO into Handheld Mic
• Windshield Included
• For ENG

Introducing the ES945LED, the new LED-equipped version of the Engineered Sound ES945 table-mount boundary microphone. The ES945LED features a touch-sensitive capacitive switch and LED status ring.

The omnidirectional condenser ES945/LED increases usability with a new toggle switch and LED status ring - which displays red when muted and green when switched on. The new LED-equipped version of the highly respected ES945 also features improved sensitivity and sound-to-noise ratio, perfectly suited to todayʼs digital matrix mixers.

The ES945/LED is available in black only.

ES945LED Specifications 263 KB

The AKG C 480 B preamplifier powering unit is the latest model in the ULS series. It accommodates the CK 61/ULS, CK 62/ULS, CK 63/ULS capsules and the new CK 69/ULS shotgun capsule, providing a higher order of performance for these capsules than previously available.

The new preamp has a vastly improved noise floor, permitting self noise performance with the four associated capsules in the range of 9 to 11 dB-A. Maximum sound pressure levels in the range of 144 dB (in the -10 dB sensitivity position) can be attained with no greater than 0.5% distortion, giving the capsules a new level of overall performance. An integral low cut filter (12 dB/octave) can be set for either 150 or 70 Hz. The +6 dB sensitivity position is intended to enhance the performance of the CK 69/ULS interference tube capsules, which normally operate over large distances.

With the available CK 61/ULS cardioid, CK 63/ULS hypercardioid, CK 62/ULS omnidirectional, and highly directional CK 69/ULS shotgun element, the C 480 Series is intended primarily for studio, broadcast and a variety of live sound and speech reinforcement applications in which state-of-the-art performance is required. A complete line of optional accessories is available. The C 480 B operates only on 48 volts phantom powering. Check the Related Products.

Features:

• Ultralow noise preamplifier for use with ULS series capsules
• Multiple directional capsules and configurations available on a high performance powering/preamp module
• Extremely flat on-axis response for all models
• Three sensitivity settings (0, +6, and -10 dB)
• High acoustic level capability

Specifications:

• Polar pattern: 10 to 30,000 Hz
• Preattenuation pad: +6, 0, -10 dB, selectable
• 
  
• Bass filter: 12 dB/octave at 70 or 150 Hz
• Impedance: 2000 ohms/1000 pF
• Supply voltage: 48 V phantom power to DIN 45596
• Current consumption:

The SMV Bag is designed to carry the Stereo VideoMic along with spare batteries, shock mount bands and other small accessories.

It features an adjustable and removable strap, belt loops, and is made from durable neoprene.

Weight 110.00gm
Dimensions 159.00mmH x 97.00mmW x 47.00mmD

The RØDE invisiLav is designed to aid the concealing of the Lavalier and smartLav microphones.
Its soft construction absorbs noise and vibration, while the wide, flat profile provides coverage from the elements and allows for versatile mounting. There's two mounting points in case a redundant mic is required, and cable management on the side.
Available in either a pack of three or a bulk pack of ten, the invisiLav comes with pre-cut, skinsafe adhesive that can be used to stick the invisiLav to either the body or to fabric. The invisiLav itself is also made from a medical grade skin safe material so it can be mounted on the body without fear of irritation.