| Content |
The PGA56 is designed for clear reproduction of the sound source in close-miking percussion applications. Available with and without a cable. XLR cable included.
The PGA56 is a professional quality snare / tom microphone with an updated industrial design that features a black metallic finish and grille offering an unobtrusive visual presence.
Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning, and a tailored cartridge for clear reproduction of sound sources. Legendary Shure quality construction ensures exceptional performance in rigorous environments.
| Frequency Response |
50–15,000 Hz |
| Phantom power required? |
No |
| Polar Pattern |
Cardioid |
| Type |
Dynamic |
| Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum.
The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels.
The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.
Features
- Frequency response shaped specifically for kick drums and bass instruments
- Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
- Studio quality performance, even at extremely high sound pressure levels
- Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Neodymium magnet for high signal–to–noise ratio output
- Low sensitivity to varying load impedance
- Legendary Shure quality and reliability
| Type |
Dynamic (moving coil) |
| Frequency Response |
20 to 10,000 Hz |
| Polar Pattern |
Supercardioid, rotationally symmetrical about microphone axis |
| Output Level |
Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL |
|
Complete With Stereo Bar, Windshield's and Cradle'
The C 414 B-XL II/ST is especially useful for stereo recordings taken from the far field with the inclusion of useful and often valuable room acoustics. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode and are selected from a large quantity of individual microphones using the described criteria by using a proprietary computer program.
Using this matched pair for stereo recordings utilizing various techniques will provide for a good and stable balance without frequency-dependent shifting of the stereo panorama.
The kit comes complete in an all-metal 'Soundtool' Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens, an H50 stereo bar and an individually-measured chart showing the response curve of the microphone. See www.dv247.com Alternative Products and Related Products on this page for your options.
The C 414B-XLII has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. A classic microphone with a distinctive timbre especially designed for recording of solo vocals and solo instruments.
Whats the difference between the C 414B-XLII and the C 414 B XLS? The main difference between the two current C414 models lies in their frequency responses. The C 414B-XLII has a series of presence rises between 2.5 KHz and 9 KHz. This will make any recording with this microphone brighter or more sibilant than the original sound. This upper mid range boost is quite helpful on vocals and certain instruments such as classical acoustic guitars using nylon or natural strings. The C 414B XLS, see www.dv247.com Alternative Products on this page, has a very flat response that will not color the original sound which is important especially in instrumental recordings. It more suited for general use.
The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid wide cardioid, hyper cardioid and figure-eight patterns. The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds. On the rear of the microphone, an electronic switch allows the selection of -6, -12 and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414B-XLII has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6 dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.
The C 414B-XLII has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems.
Features:
- High sensitivity and extremely low self noise
- Five switchable polar patterns for placement and application flexibility
- Two-color LEDs provide quick visual indication of selected polar pattern and output overload
- Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
- Supplied with Hard Shell road case with 2 x AKG H-85 shock mounts, 2 x W414X external windscreens and an H50 stereo bar
- High sound pressure level capability, 140 - 158dB, and wide dynamic range
- Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
- Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
- All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions
Specifications:
- Type: 1" large diaphragm pressure gradient microphone
- Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
- Frequency Range: 20 to 20,000 Hz
- Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
- Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
- Preattenuation Pad: -6, -12,-18 dB, switchable
- Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
- Impedance: = 2,200 ohms
- Supply voltage: 48 V phantom power to DIN/IEC
- Current consumption: Approximately 4.5 mA
- Dynamic range: 134 dB minimum
- Environment Temperature range: -10° C to +60° C (14° F to 140° F)
- Relative humidity: 95% (+20° C/68° F), 85% (+60° C/140° F)
- Connector: 3-pin XLR to IEC
- Dimensions: 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
- Net weight 300 g (10.6 oz.)
|
Audio Frequency Response 50 Hz - 16,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Element Dynamic
Finish Textured Satin Black
Impedance, Low-Z balanced 600 Ω
Mic Type Instrumental
Open Circuit Voltage 2.2 mV/Pascal
Polar Pattern Supercardioid
Power Requirement Passive
Wired/Wireless Wired
Weight Net 8.32 oz (236 g)
|
The DMK57-52 Drum Mic Kit is a conveniently packaged selection of microphones and mounts, designed to offer a complete core package of microphones for recording and performing drummers at a great price. The Drum Mic Kit includes three SM57 microphones, one Beta 52 microphone, three A56D drum-mounting systems, and a lightweight and durable carrying case.
The industry standard for snare drum, and a reliable and high-performing choice for toms, Shure's cardioid dynamic SM57 microphone features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately.
Perfect for the kick drum, the supercardioid Beta 52? derives its low-end punch and sonic presence from a carefully tailored frequency response. Equipped with its own pneumatic shock mount, the Beta 52 is additionally designed with an integral locking stand mount for quick-and-easy set up.
A key element of the kit, Shure's A56D universal drum mounting system can be used to position microphones virtually anywhere -- on drum rims, microphone stands, even cymbal stands. Designed with captive parts to prevent the loss of individual pieces, the A56D is small, secure, and can be used with any standard microphone, making it a great tool for both stage and studio environments. | The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps.
Technical Info
Type: Dynamic, Moving coil.
Freq.Resp.: 40 to 16.500 Hz.
Polar Pattern: Cardioid
Sensitivity (1000Hz): 1,7 mV/Pa*
(*1 Pa = 94 dB SPL)
Max SPL: 137dB
Impedance: 600 Ohm
Power supply: none
Connector: 3p. XLR male-type).
Net. Weight: 245 g
Dimensions: (Ø 32 mm x L 157 mm)
Accessories: 6 mtr balanced cable
with XLR plugs |
Reviews
There are no reviews yet.