| Content |
Drum microphone kit includes 4 drum microphones to cover all you need in performance and recording applications. Includes 1 PGA52 kick drum microphone, 2 PGA56 drum microphones, 3 PGA instrument microphones, 2 drum mounts, and 6 XLR cables.
Main Features
- 1 PGA52 kick drum microphone
- 2 PGA56 drum microphones
- 1 PGA57 instrument microphone
- 2 PGA81 instrument microphones
- 2 Drum mounts
- 6 XLR-XLR cables
- 1 carrying case
Weight:
5054 g
Height x Width x Depth:
330.2 × 579.12 × 116.84 mm
PGADRUMKIT6 Specifications
Weight:
5054 g
Height x Width x Depth:
330.2 × 579.12 × 116.84 mm
Number of included products:
6
PGA52 Specifications
Weight:
454 g
Height x Width x Depth:
108.0 × 67.0 × 67.0 mm
Frequency Response:
50 Hz – 12 kHz
Frequency Response:
Tailored
Sensitivity:
-55.00 dBV/Pa – 1.75 mV/Pa
Transducer Type:
Dynamic
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
3 Pin XLR
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Cartridge:
Fixed
PGA57 Specifications
Weight:
280 g
Frequency Response:
70 Hz – 15 kHz
Frequency Response:
Tailored
Sensitivity:
-56.50 dBV/Pa – 1.50 mV/Pa
Transducer Type:
Dynamic
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
3 Pin XLR
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Cartridge:
Fixed
PGA81 Specifications
Weight:
186 g
Frequency Response:
40 Hz – 18 kHz
Frequency Response:
Flat
Sensitivity:
-48.50 dBV/Pa – 3.80 mV/Pa
Equivalent Selfnoise:
20 dB(A)
Sound Pressure:
129.5 dB SPL
Transducer Type:
Condenser
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
3 Pin XLR
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Requires Phantom Power:
48 VDC
Cartridge:
Fixed
PGA56 Specifications
Weight:
287 g
Frequency Response:
50 Hz – 15 kHz
Frequency Response:
Tailored
Sensitivity:
-57.00 dBV/Pa – 1.45 mV/Pa
Transducer Type:
Dynamic
Polar Pattern:
Cardioid
Switchable low cut:
No
Connectors:
3 Pin XLR
Attenuator:
No
Interchangeable Capsule:
No
Main Functionality:
Performance
Headphone Output:
No
Cartridge:
Fixed
|
The Shure KSM137 is an end-address condenser microphone with a cardioid polar pattern. Designed for studio use, yet rugged enough for live applications, the KSM137 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.
Features
- A highly consistent cardioid polar pattern
- Ultra-thin, 2.5 micron, 24 karat gold-layered, low mass Mylar? diaphragm for superior transient response
- Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
- Premium electronic components, including gold-plated internal and external connectors
- Subsonic filter eliminates low frequency rumble (less than 17 Hz) caused by mechanical vibration
- Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
- Three-position switchable pad (0 dB, 15 dB, and 25 dB) for handling extremely high sound pressure levels (SPLs)
- Three-position switchable low-frequency filter reduces background noise and counteracts proximity effect
Performance Characteristics
- Extended frequency response
- Low self noise
- Exceptional reproduction of low-frequency sounds
- Can withstand high sound pressure levels (SPL)
- High output level
- No crossover distortion
- Uniform polar response
- Superior common mode rejection and suppression of radio frequency interference
APPLICATIONS
Some typical applications for the KSM137 are listed below. Microphone use, however, is a matter of personal taste. The KSM137 may be used for a variety of applications other than those listed.
- Acoustic instruments -- such as piano, guitar, drums, percussion, strings
- Wind instruments -- brass and woodwind
- Low frequency instruments -- such as double bass, electric bass, kick drum
- Overhead miking -- drums or percussion
- Ensembles -- choral or orchestral
- Room ambiance pick-up -- guitar amplifier or drums
Both the acoustic environment and microphone placement strongly affect the sound obtained from miking a source. You may need to experiment with microphone placement and room treatments to achieve the best overall sound for each application.
Suggested Applications
Acoustic Guitar
Acoustic Bass
Cymbals
Brass/Woodwinds
Orchestra
Ensemble Vocals
Piano
Strings
Room Ambience
Live Recording
|
- Especially for tom and snare recording
- Polar pattern: cardioid
- Frequency range: 40 - 18,000 Hz
- Impedance: 350 Ω
- Robust metal chassis
- Incl. special tom holder
- Bag included
- Dimensions: 63 x 41 mm
- Weight: 125 g
|
The E-602 is a cardioid microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.
Frequency Response : 20.....16000 Hz
Sensitivity in free field, no load (1kHz) : 1,0 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 60 x 153 mm
Weight : w/o cable 550 g
| The unidirectional dynamic microphone DAP PL-07 is ideal for live sound reinforcement and clear recording of Brass, Saxophone, Harmonica, Snare, Tom, Congas and Guitar-Bass Amps.
Technical Info
Type: Dynamic, Moving coil.
Freq.Resp.: 40 to 16.500 Hz.
Polar Pattern: Cardioid
Sensitivity (1000Hz): 1,7 mV/Pa*
(*1 Pa = 94 dB SPL)
Max SPL: 137dB
Impedance: 600 Ohm
Power supply: none
Connector: 3p. XLR male-type).
Net. Weight: 245 g
Dimensions: (Ø 32 mm x L 157 mm)
Accessories: 6 mtr balanced cable
with XLR plugs |
Audio Frequency Response 20 Hz - 10,000 Hz
Case Material Die cast zinc
Connector Type 3-pin XLR
Element Dynamic
Finish Textured Satin Black
Impedance, Low-Z balanced 150 Ω
Mic Type Instrumental
Open Circuit Voltage 0.63 mV/Pascal
Polar Pattern Supercardioid
Power Requirement Passive
Shipping Weight 23.7 oz (672 g)
Wired/Wireless Wired
Weight Net 12.84 oz (364 g)
|
Reviews
There are no reviews yet.