Content |
Model Description: In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Receivers and P4M Personal Monitor Mixer, P4T Transmitter
Model Details: The Model PS40E is a In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Recievers and P4M Personal Monitor Mixer, P4T Transmitter.
Specifications:
|
Shure UA-870WB Directional UHF Antenna
A Directional Antenna for Shure U4 and ULX Receivers!
The Shure UA870 is an active UHF wireless directional antenna featuring a log periodic dipole array. When compared to an omnidirectional 1/2-wave antenna, the cardioid pattern provided by the UA870 offers enhanced reception of the desired coverage area and greater rejection of RF signals outside the coverage area.
To compensate for coaxial cable signal loss, the UA870 has an on-board amplifier that offers user selectable 3 or 10dB gain. The gain setting is indicated by two LEDs. Remote 12 Vdc power for the antenna amplifier is provided by a Shure U4 receiver or a Shure UA840 antenna distribution system through the connecting coaxial cable.
The UA870 can be mounted on a microphone stand, suspended from the ceiling, or mounted to a wall using the integrated swivel adapter bracket. The UA870 is weather resistant for use outdoors. For best diversity performance, use two UA870 antennas.
The UA870WB is a UHF wideband (470-900MHz) active directional antenna for U4S, U4D, ULXP and ULXS receivers or UA844 and UA845 antenna distribution systems. |
- For indoor and outdoor use, preferred-direction coverage
- Water-resistant, rugged case with BNC input
|
Passive omni-directional antenna. Transmitting and
receiving antenna for frequencies between 450and 960 MHz. | Specifications WS1000R
- Frequency Range: 790.850 MHz - 813.800 MHz
- Switching bandwith: 0.025 MHz
- No. of channels: 160 (10 groups of 16 CHN)
- Sensitivity: -94 dBm for 30 dB SINAD, typical
- Image Rejection: >60 dB
- S/N Ratio: >105 dB (A)
- T.H.D
- Audio Output Level XLR connector: -12 dBV
- 1/4inch connector: -18 dBv
- Audio Response: 60 Hz - 16 kHz
- Dynamic Range: >95 dB A-weighted
- Dimensions (W x H x D): 212 mm x 45 mm x 160 mm
- Power Requirements: 12-18 V dc at 400mA
|
Technical Data
RF frequency range 470 ..... 870 MHz
Transmission loss 0 dB
Nominal impedance 50 Ohm
RF input BNC
Remarks Booster Feed: 12 V, 70 mA
Mains voltage 100 - 240 V
Mains frequency 50 - 60 Hz
Dimensions 19 ʼʼ, 1U
Weight approx. 3 kg |
Reviews
There are no reviews yet.