Shure P2R – Q3Wireless Bodypack Receiver for PSM-200

Discontinued

90.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Shure P2R -Q3 Wireless Bodypack Receiver for PSM-200 FREQUENCY 748,000 – 784.000 MHz CH1: 749.100     CH5: 772.000 CH2: 754.025     CH6: 775.000 CH3: 756.000     CH7: 778.775 CH4: 765.900     CH8: 781.900 The P2R Hybrid Bodypack Receiver is the world’s first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. […]

 

Read more

Shure P2R -Q3 Wireless Bodypack Receiver for PSM-200

FREQUENCY 748,000 – 784.000 MHz

CH1: 749.100     CH5: 772.000

CH2: 754.025     CH6: 775.000

CH3: 756.000     CH7: 778.775

CH4: 765.900     CH8: 781.900

The P2R Hybrid Bodypack Receiver is the world’s first bodypack receiver to function as a
wired receiver, a wireless receiver, or both at the same time. This and other
unique features, along with excellent sound quality, make the P2R an exceptional value.

Key Features:

Can operate as a wired or wireless bodypack, or both simulaneously
Frequency locator
Built-in headphone limiter
Integrated cable management
High-impact plastic chassis
1/4″ Line inpit jack with high/low gain switch

Operating Controls:

Volume knob
Frequency select

LED Indicators:

Power
RF reception
Frequency
Limiter
Low Battery

RF Sensitivity
­109 dBm typical
Squelch Threshold
­102 dBm typical
Antenna
Attached Whip
Audio Input Connector
Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = ­10 dBu
Frequency Response: 30 Hz to 20 kHz (+/­3 dB); earphone dependent
Power Requirements
9 V alkaline battery, Duracell? type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedance
8 ohms
Net Weight
100 g (3.52 oz.), less battery
Overall Dimensions
122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Shure P2R – Q3Wireless Bodypack Receiver for PSM-200”

Your email address will not be published. Required fields are marked *

Quick Comparison

Shure P2R - Q3Wireless Bodypack Receiver for PSM-200 removeLD Systems LDMEI100G2BPR receiver for MEI100G2 IN-EAR Wireless In-Ear Monitoring system removeSENNHEISER Receiver EK-2000-BW-X removeAudio Technica ATW-T310b UniPak® transmitter removeAudio Technica AEW-T1000a UHF UniPak™ transmitter removeShure P9R Monitor System Receiver remove
NameShure P2R - Q3Wireless Bodypack Receiver for PSM-200 removeLD Systems LDMEI100G2BPR receiver for MEI100G2 IN-EAR Wireless In-Ear Monitoring system removeSENNHEISER Receiver EK-2000-BW-X removeAudio Technica ATW-T310b UniPak® transmitter removeAudio Technica AEW-T1000a UHF UniPak™ transmitter removeShure P9R Monitor System Receiver remove
Image
SKUP2RLDMEI100G2BPRH99SE00248ATW-T310bAEW-T1000aP9RA
Rating
Price 90.00 incl. GR VAT 234.56 incl. GR VAT 969.00 incl. GR VAT 298.25 incl. GR VAT 460.56 incl. GR VAT 659.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

In stock

In stock

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderIn stockIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentShure P2R -Q3 Wireless Bodypack Receiver for PSM-200 FREQUENCY 748,000 - 784.000 MHz CH1: 749.100     CH5: 772.000 CH2: 754.025     CH6: 775.000 CH3: 756.000     CH7: 778.775 CH4: 765.900     CH8: 781.900 The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value. Key Features: Can operate as a wired or wireless bodypack, or both simulaneously Frequency locator Built-in headphone limiter Integrated cable management High-impact plastic chassis 1/4" Line inpit jack with high/low gain switch Operating Controls: Volume knob Frequency select LED Indicators: Power RF reception Frequency Limiter Low Battery RF Sensitivity ­109 dBm typical Squelch Threshold ­102 dBm typical Antenna Attached Whip Audio Input Connector Connector Type: 1/4-inch Mono Impedance: 1 megohm Maximum Input Level: LO = +0 dBu; HI = ­10 dBu Frequency Response: 30 Hz to 20 kHz (+/­3 dB); earphone dependent Power Requirements 9 V alkaline battery, Duracell? type MN1604 recommended Battery Life Volume Dependent Wired (RF Off): 6 hours Wireless (RF On): 4 hours Audio Output Connector 1/8 inch (3.5 mm) Minimum Load Impedance 8 ohms Net Weight 100 g (3.52 oz.), less battery Overall Dimensions 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

User's Manual

LD Systems MEI100G2

The LD Systems MEI 100 G2 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in both the 823 - 832 and 863 - 865 MHz bands.

Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously.

 

* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis


  • Product type: Belt pack receiver
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • Frequency response: 80 Hz - 15 kHz ± 3 dB
  • Audio outputs: 3.5 mm jack
  • Max. audio output level: 100 mW
  • Controls: Up, Down, Set, Volume
  • Indicators: LC display, RF (LED)
  • Power supply: 2 x 1.5 V AA
  • Operating time: > 10 hrs.
  • Width: 65 mm
  • Height: 95 mm
  • Depth: 25 mm

 

It is nice when you can concentrate fully on the picture because you know the sound is reliable. This camera receiver allows you to do just that. Equipped with adaptive diversity, the camera receiver ensures reliable reception. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for components of the 2000 series. The transmitter settings can be synchronized quickly from EK 2000 using infrared technology.

The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided.

The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.

 

  • RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
  • Spurious Emissions: Following federal and national regulations
  • Input Connection: Four-pin Locking Connector
    Pin 1: GND, Pin 2: INST INPUT,
    Pin 3: MIC INPUT, Pin 4: DC BIAS +5V
  • Batteries: Two 1.5V AA, not included
  • Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline)
    Depending on battery type and use pattern.
  • Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm H
  • Net Weight: 81 g without batteries

 

Compatible with the Wireless Essentials® range. Rugged, ergonomic metal housing. Includes field-replaceable helical and flexible-whip antennas. Three-position sliding cover limits access to controls as desired: full access, Power/Mute button only, or no access. Two position mounting clip. For use with AEW-T1000a and all Audio-Technica UniPak™ Wireless Transmitters.

The AEW-T1000a wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a DC bias connection allowing it to be used with both condenser and dynamic microphones. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. A dual-colour power/mute indicator LED provides visual indication of transmitter status. The transmitter operates using two standard AA batteries and features high- and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently, including battery level remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of transmitterʼs power/mute button as desired for particular users and applications. Four nameable user presets allow for storage and recall of commonly used settings. To match the audio input level to the transmitter, a ten-position audio input gain setting selected through the function menu is provided. The body-pack features a safety cover to protect the soft-touch controls from being accidently activated and a recessed input connector to increase the life of the microphone cable. Inputs are available on the UniPak® for low impedance microphone and high impedance musical instrument or line input. Constructed of metal, the body-pack transmitter features a field replaceable antenna, captive locking battery cover door, a short rigid helical antenna and a flexible wire antenna.

  • Available in the following frequency bands:
    541.500 - 566.375 MHz (C Band)
    655.500 - 680.375 MHz (D Band)
    721.500 - 746.375 MHz (G Band)
  • 25 kHz frequency spacing makes it easier to find a clear, open
  • frequency in crowded RF environments
  • Dual RF power output selection to optimize battery life
  • Digital Tone Lock™ squelch that communicates transmitter data
  • to the receiver
  • Function menu displayed in a backlit LCD window, controlled by
  • internal soft-touch controls
  • High efficiency dual companding system for flawless audio
  • Four nameable user presets
  • Battery fuel gauge on LCD readout
  • Recessed microphone input connector
  • Power/mute lock provision as well as safety door to cover controls
  • Dual-colour power/mute status indictor
  • Microphone or line input with DC bias voltage
  • 18 dB audio input level adjustment
  • Operates on two AA batteries
  • Captive locking battery compartment door
  • Adjustable squelch
  • Rugged metal housing with a reversible clothing clip
  • RF Power Output: High: 35 mW; Low: 10 mW, nominal
  • Spurious Emissions: According to National Regulations
  • Microphone Dynamic Range: >=110 dB, A-weighted
  • Instrument Dynamic Range: >=110 dB, A-weighted
  • Input Connections: High impedance, low impedance, bias
  • Batteries: Two 1.5V AA alkaline (not included)
  • Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
  • Dimensions: 66.0mm W x 87mm H x 24mm; not including antenna
  • Net Weight: 125 g


The P9R is a compact, stereo bodypack receiver for use with the PSM®900 Wireless Personal Monitor System. It offers premium features like RF Scan and Automatic Gain Control for unparalleled RF stability and channel availability, all packed in the thinnest form factor available. Patent-pending CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels from one bodypack for quick and easy reference.

Features:

    Ultra-thin, low profile bodypack allows discreet placement on the performer
    Enhanced digital stereo encoder provides an expansive soundstage for excellent audio clarity and detail
    RF Scan: stand where the artist will be on stage and instantly check RF level
    Automatic Gain Control greatly prevents signal dropout due to RF overload and allows more channels to be used simultaneously
    Syncs to a P9T transmitter quickly and easily over IR link using Scan and Sync
    Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
    Separate, easily visible audio and RF status indicator LED's
    Audio level and battery life metering
    Selectable high-frequency EQ boost (+3/+6 dB @ 10 kHz)
    Volume and balance controls
    Extruded aluminum construction for rugged dependability

Specifications:

    Front-End RF Filtering: –3 dB point 30.5 MHz from center frequency
    Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
    RF Sensitivity (20 dB SINAD): 2.2 µV
    Squelch Threshold (±3 dB SINAD): 22 dB SINAD
    Adjacent Channel Rejection: >70 dB
    Intermodulation Attenuation: >70 dB
    Blocking: >80 dB
    Image Rejection: >100 dB
    Audio Output Power (1kHz @
Weight0.10 kg0.33 kg0.50 kg0.10 kg0.10 kg0.35 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.33 kg
Weight 0.50 kg
Weight 0.10 kg
Weight 0.10 kg
Weight 0.35 kg