| Content | The legendary Shure vocal mic is tuned to accentuate the warmth and clarity of lead and back-up vocals. Consistently the first choice of performers around the globe. The Shure SM58? is a unidirectional (cardioid) dynamic vocal microphone designed for professional vocal use in live performance, sound reinforcement, and studio recording. A highly effective, built-in, spherical filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The SM58 has a tailored vocal response for a sound which is a world standard. Rugged construction, a proven shock mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently. Outdoors or indoors, singing, speech - the SM58 is the overwhelming choice of professionals.
- Frequency response tailored for vocals, with brightened midrange and bass rolloff
- Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
- Pneumatic shock-mount system cuts down handling noise
- Effective, built-in spherical wind and pop filter
- Supplied with break-resistant stand adapter which rotates 180 degrees
- Lengendary Shure quality, ruggedness and reliability
- Cardioid (unidirectional) dynamic
- Frequency response: 50 to 15,000 Hz
| Frequency Range |
50 Hz to 15 kHz |
| Impedance |
150 Ohms |
| Sensitivity |
-57.5 dBV/Pa at 1 kHz |
|
Offered in a convenient and cost-effective "three-pack," the Q6 gives you plenty of output and performance for a variety of situations.
3 Mics in a Foam Padded Hard Shell Case
High gain, low impedance design
Dynamic Neodymium mic element
Super Cardioid pickup pattern
Multi-axis shock mounted element
On/Off Switch
Hard Shell Carry Case for 3 mics
(3) Mic Clips included
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
| Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
| Polar Pattern |
Supercardioid |
| Frequency Response |
50 Hz - 16 kHz |
| Maximum Input Sound Level |
not specified by manufacturer |
| Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
| Output Impedance |
150 Ohms (290 Ohms Actual) |
| Output Connectors |
XLR-3 Type |
| Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
| Weight |
9.92 oz. (278 g) |
|
- Tailored for Vocals & Speech
- Cardioid Polar Pattern
- Shock-Mounted Dynamic Cartridge
- 50 Hz to 15 kHz Frequency Response
The Shure 55SH Series II is a Unidyne cardioid dynamic microphone boasting a classic look and vocal-tailored sound for recording sessions, live stage applications, and on-camera use. The dynamic cartridge is shock-mounted to impede handling noise and vibrations transferred through your mic stand. The implementation of a cardioid polar pattern minimizes pickup of off-axis noise and ambience, yielding higher gain before feedback and attenuated stage bleed.
The mic delivers a frequency response of 50 Hz to 15 kHz with a gentle presence boost peaking at approximately 6.5 kHz. Its XLR 3-pin output ensures compatibility with most mixer inputs, microphone preamps, and portable PA systems. An on/off switch is provided for convenient muting of the mic between speeches or performances. The attached, self-tensioning, 5/8“-27 thread swivel mount can be tilted up to 45 degrees forward and 80 degrees backward. Chrome die-cast metal construction provides tour-worthy durability.
Classic Appearance
In addition to being a mic with solid audio characteristics for the studio and stage, the 55SH Series II makes a great prop microphone in video shoots, photos, and theater applications
Tailored Frequency Response
The 50 Hz to 15 kHz frequency response features a slight dip in the low-mid frequency range and a gentle rise from 1 to 10 kHz, making its sonic performance optimized for vocals, public address, and dialog
Cardioid Polar Pattern
The cardioid polar pattern is effective in minimizing sound pickup at the off-axis sections of the capsule, ensuring high gain before feedback
Shock-Mounted Cartridge
The dynamic capsule is shock-mounted for added protection against shock- and structure-born noise
Shure 55SH II Specs
Microphone
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Dynamic |
| Polar Pattern |
Cardioid |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
None |
Performance
| Frequency Range |
50 Hz to 15 kHz |
| Impedance |
270 Ohms |
| Sensitivity |
-58 dBV/Pa at 1 kHz |
Connectivity
| Output Connectors |
1 x XLR 3-Pin |
Physical
| Dimensions |
ø: 3.06 x L: 7.4" / ø: 77.8 x L: 188 mm |
| Weight |
1.37 lb / 0.62 kg |
|
|
|
|
| Pick Up Pattern |
Cardioid |
| Frequency Response |
30 - 17,000 Hz |
| Sensitivity |
2 mV/Pa +/- 3 dB |
| Nominal Impedance |
200 ohms |
| Min Terminating Impedance |
200 ohms |
| Dimensions |
8.375" x 1.875" x 2" |
| Weight |
Approx. 14 oz (385 g) |
|
|
| Dynamic largemembran-Microphone forBroadcast- and Syncronize-Studios and professionalPodcasting, internal Pop-Filter, Neodym Large membranCapsule (28 mm) cardiod, 40 Hz - 14 kHz, 115 dB SPL, Weight: 1.025g, Lenght: 215 mm, 520 mm diameter |
Reviews
There are no reviews yet.